Lpc2000

As far as I know, you should connect pin 8 and 15 on the DB25.

 

________________________________

From: kenbnny [mailto:kenbnny@...] 
Sent: 22 February 2005 08:15 AM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] Re: OCD commander

 



Bruce,

I'm using home made wiggler interface as per Schematic given in 
JTAG.ZIP in group files. 

Where can I get information regarding which loopback pins connection.
Also looking for older version of 2.06version OCD commander software.

Thanks,

Ken

--- In lpc2000@yahoogroups.com, Bruce Paterson <bruce@t...> wrote:
> kenbnny wrote:
> 
> > 
> > Hello Guys,
> > 
> > I'm using OCD commander software of Macraigor Systems for 
connecting 
> > to the LPC device using "WIGGLER" Interface. 
> > 
> > Does anybody know why always I get this message reported.
> > "Error Response from INITIALIZE: 0x03 initialize_target : cable 
> > disconnected  (10 : 03)"
> 
> Are you using a Macraigor Wiggler or a home built one ?
> Recently Macraigor added code to their later ocd commander on 
ocdremote 
> software to sense a looped back pin to see if a 'real' wiggler or 
not.
> 
> Suggestions:
> * Try an older version of ocd commander (I don't have, but sure 
someone 
> here will. I only have an older version of ocdremote).
> * Look back through this list history to see which pins need to be 
> looped back on a home grown wiggler to make it look like a 
macraigor.
> * Check your parallel port is in EPP mode (CMOS setup).
> 
> 
> -- 
> Cheers,
> Bruce
> -------------------------------------------------------------------
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom
> they are addressed. If you have received this email in error please
> notify the system manager.
> 
>      /\\\/\\\/\\\    /   /      Bruce Paterson
>     /  \\\ \\\ \\\  /   /    Senior Design Engineer
>    /   /\\\/\\\/\\\/   /   8 Anzed Court, Mulgrave, Vic, 3170
>   /   /  \\\ \\\ \\\  /  PO Box 4112, Mulgrave, Vic, 3170, Australia
> /   /    \\\/\\\ \\\/   Ph: +61 3 8561 4232   Fax: +61 3 9560 9055
>        Tele-IP Ltd.      Email: bruce@t...    Icq: #32015991
>                          WWW:   http://www.tele-ip.com       VK3TJN
> -------------------------------------------------------------------






________________________________

Yahoo! Groups Links

*	To visit your group on the web, go to:
	http://groups.yahoo.com/group/lpc2000/
	  
*	To unsubscribe from this group, send an email to:
	lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
	  
*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 



[Non-text portions of this message have been removed]