Lpc2000

Hi,

I'm using Keil (UV3) with the Olimex LPC-H2294 board and I just can't
get any of my programs to work.  

I made a very small program to turn on a led in the board using the
Keil suplied Philips startup ASM file and just 2 lines of C code to
setup the IO0DIR and to clear the desired pin. The program complies
fine and the HEX file looks Ok (as far as I can tell) , I use the
Philips LPC2000 Flash Utility V2.2.0 to upload the file and it works
ok, but when I do a "Compare Flash" the Philips LPC2000 Flash Utility
tells that the "file compare failed" and  the program does not run on
the board.

I have upload to the board (using the Philips LPC2000 Flash Utility )
the HEX file with the exemple program suplied by Olimex and I DONT get
"file compare failed" and the board works fine. So, the board is in
perfect working condition.

Can someone please give me some sugestion on what is going wrong , is
there any special issue with Keil and the  ?


Thanks

Paulo A.