Lpc2000

Once or, maybe, even more in this forum was mentioned, that the
Philips Flash Utility has a bug, it does download, but do not work with
"Compare Flash" function.
Buy the way, V2.2.1 is now available, but again the bug is not corrected,
though, if Philips open its source code, any programmer can easily correct
this bug.

Varuzhan

  ----- Original Message ----- 
  From: Paulo de Almeida 
  To: lpc2000@yahoogroups.com 
  Sent: Friday, February 25, 2005 2:35 PM
  Subject: [lpc2000] Keil and LPC2294 - What am I doing wrong ?




  Hi,

  I'm using Keil (UV3) with the Olimex LPC-H2294 board and I just can't
  get any of my programs to work.  

  I made a very small program to turn on a led in the board using the
  Keil suplied Philips startup ASM file and just 2 lines of C code to
  setup the IO0DIR and to clear the desired pin. The program complies
  fine and the HEX file looks Ok (as far as I can tell) , I use the
  Philips LPC2000 Flash Utility V2.2.0 to upload the file and it works
  ok, but when I do a "Compare Flash" the Philips LPC2000 Flash Utility
  tells that the "file compare failed" and  the program does not run on
  the board.

  I have upload to the board (using the Philips LPC2000 Flash Utility )
  the HEX file with the exemple program suplied by Olimex and I DONT get
  "file compare failed" and the board works fine. So, the board is in
  perfect working condition.

  Can someone please give me some sugestion on what is going wrong , is
  there any special issue with Keil and the  ?


  Thanks

  Paulo A.

        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/lpc2000/
      
    b.. To unsubscribe from this group, send an email to:
    lpc2000-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]