Yahoo Groups archive
Thread
2006-01-16 by gtechnzltd
Hi there, I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A supplier a bit closer than www.digikey.com would be great to reduce frieght costs. Is any one in NZ using this Part? Thanks for your time. Grant Chch NZ
2006-01-16 by Don Ingram
gtechnzltd wrote: > Hi there, > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A supplier > a bit closer than www.digikey.com would be great to reduce frieght costs. > > Is any one in NZ using this Part? > > Thanks for your time. > Grant > Chch NZ > > > Adilam is the company, both Auckland & Christchurch -- Cheers Don
2006-01-16 by gtechnzltd
Thanks Don, Adilam are asking $20us for these parts when Digikey lists them for $11us. If Adilam are the only option I have to take it. Once again thanks Don, Grant --- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > > gtechnzltd wrote: > > Hi there, > > > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A supplier > > a bit closer than www.digikey.com would be great to reduce frieght costs.
> > > > Is any one in NZ using this Part? > > > > Thanks for your time. > > Grant > > Chch NZ > > > > > > > > Adilam is the company, both Auckland & Christchurch > > -- > Cheers > > Don >
2006-01-16 by nonuckingfumber
Lucky you.......I am in Europe, like Philips, and would just love to be able to get small quantities at these prices! BTW, In the past I found the cheapest place to get the (scotish) FTDI chips was from a shop in Australia....post included! What it is about you chaps down under.....how do you get your parts so cheaply! I think I shall get my sister to do my European compnent soucing, she lives on the banks peninsular south of Christchurch, that should be remote enougth to get cheap prices :-) --- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > Thanks Don, > Adilam are asking $20us for these parts when Digikey lists them for $11us. > If Adilam are the only option I have to take it. > > Once again thanks Don, > > Grant > > > --- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > > > > gtechnzltd wrote: > > > Hi there, > > > > > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A supplier
> > > a bit closer than www.digikey.com would be great to reduce frieght > costs. > > > > > > Is any one in NZ using this Part? > > > > > > Thanks for your time. > > > Grant > > > Chch NZ > > > > > > > > > > > > > Adilam is the company, both Auckland & Christchurch > > > > -- > > Cheers > > > > Don > > >
2006-01-16 by Tom Walsh
nonuckingfumber wrote: >Lucky you.......I am in Europe, like Philips, and would just love to >be able to get small quantities at these prices! > >BTW, In the past I found the cheapest place to get the (scotish) FTDI >chips was from a shop in Australia....post included! > >What it is about you chaps down under.....how do you get your parts so >cheaply! I think I shall get my sister to do my European compnent >soucing, she lives on the banks peninsular south of Christchurch, that >should be remote enougth to get cheap prices :-) > > > > HA! Think about it... Where do you suppose the majority of semiconductor fabrication is done today? Philipines, Tiawan, China, Indonesia, ... :-) TomW >--- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > >>Thanks Don, >>Adilam are asking $20us for these parts when Digikey lists them for >> >> >$11us. > > >>If Adilam are the only option I have to take it. >> >>Once again thanks Don, >> >>Grant >> >> >>--- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: >> >> >>>gtechnzltd wrote: >>> >>> >>>>Hi there, >>>> >>>>I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A >>>> >>>> >supplier > > >>>>a bit closer than www.digikey.com would be great to reduce frieght >>>> >>>> >>costs. >> >> >>>>Is any one in NZ using this Part? >>>> >>>>Thanks for your time. >>>>Grant >>>>Chch NZ >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>Adilam is the company, both Auckland & Christchurch >>> >>>-- >>>Cheers >>> >>>Don >>> >>> >>> > > > > > > > >Yahoo! Groups Links > > > > > > > > > -- Tom Walsh - WN3L - Embedded Systems Consultant http://openhardware.net, http://cyberiansoftware.com "Windows? No thanks, I have work to do..." ----------------------------------------------------
2006-01-16 by lpc2100_fan
Hi, the digikey prices are very much international. There is always shipping and handling which can be a lot if you buy only one device but their prices if you order a few are very good. For Germany go: http://de.digikey.com/ and type LPC2138 in the search window (prices in Euro) For the UK go here: http://dkc1.digikey.com/uk/digihome.html prices in Pound Sterling May be this helps you to get good prices in Europe. Bob --- In lpc2000@yahoogroups.com, "nonuckingfumber" <nonuckingfumber@y...> wrote:
> > Lucky you.......I am in Europe, like Philips, and would just love to > be able to get small quantities at these prices! > > BTW, In the past I found the cheapest place to get the (scotish) FTDI > chips was from a shop in Australia....post included! > > What it is about you chaps down under.....how do you get your parts so > cheaply! I think I shall get my sister to do my European compnent > soucing, she lives on the banks peninsular south of Christchurch, that > should be remote enougth to get cheap prices :-) > > > > --- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > > > Thanks Don, > > Adilam are asking $20us for these parts when Digikey lists them for > $11us. > > If Adilam are the only option I have to take it. > > > > Once again thanks Don, > > > > Grant > > > > > > --- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > > > > > > gtechnzltd wrote: > > > > Hi there, > > > > > > > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A > supplier > > > > a bit closer than www.digikey.com would be great to reduce frieght > > costs. > > > > > > > > Is any one in NZ using this Part? > > > > > > > > Thanks for your time. > > > > Grant > > > > Chch NZ > > > > > > > > > > > > > > > > > > Adilam is the company, both Auckland & Christchurch > > > > > > -- > > > Cheers > > > > > > Don > > > > > >
2006-01-16 by Frantz Robinson
You have another possible option: Future has a branch in New Zealand, The 2138 price is $8.75 US, and for all LPC micros, Future will sell small qty's. (if you only want one or 2, you can probably get them as free samples) There's lots in stock in the Boston warehouse. Future Electronics Christchurch Suite 4 5 Wordsworth Street Sydenham, Christchurch 8002 Tel: 64-3-982 3256 Fax: 64-3-982 3258 > -----Original Message----- > From: Tom Walsh [mailto:tom@...] > Sent: Monday, January 16, 2006 9:56 AM > To: lpc2000@yahoogroups.com > Subject: Re: [lpc2000] Re: Buy LPC2138 parts > > nonuckingfumber wrote: > > >Lucky you.......I am in Europe, like Philips, and would just love to > >be able to get small quantities at these prices! > > > >BTW, In the past I found the cheapest place to get the (scotish) FTDI > >chips was from a shop in Australia....post included! > > > >What it is about you chaps down under.....how do you get your parts so > >cheaply! I think I shall get my sister to do my European compnent > >soucing, she lives on the banks peninsular south of Christchurch, that
> >should be remote enougth to get cheap prices :-) > > > > > > > > > HA! Think about it... Where do you suppose the majority of > semiconductor fabrication is done today? Philipines, Tiawan, China, > Indonesia, ... > > :-) > > TomW > > > >--- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > > > > >>Thanks Don, > >>Adilam are asking $20us for these parts when Digikey lists them for > >> > >> > >$11us. > > > > > >>If Adilam are the only option I have to take it. > >> > >>Once again thanks Don, > >> > >>Grant > >> > >> > >>--- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > >> > >> > >>>gtechnzltd wrote: > >>> > >>> > >>>>Hi there, > >>>> > >>>>I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A > >>>> > >>>> > >supplier > > > > > >>>>a bit closer than www.digikey.com would be great to reduce frieght > >>>> > >>>> > >>costs. > >> > >> > >>>>Is any one in NZ using this Part? > >>>> > >>>>Thanks for your time. > >>>>Grant > >>>>Chch NZ > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>Adilam is the company, both Auckland & Christchurch > >>> > >>>-- > >>>Cheers > >>> > >>>Don > >>> > >>> > >>> > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > -- > Tom Walsh - WN3L - Embedded Systems Consultant > http://openhardware.net, http://cyberiansoftware.com > "Windows? No thanks, I have work to do..." > ---------------------------------------------------- > > > > > > Yahoo! Groups Links > > > > >
2006-01-16 by gtechnzltd
Hello Nonuckingfumber, I just got the latest LPC2138 pricing from Adilam. $15us each and $10us frieght shipped out of Australia. Order must be bigger than $70us. Regards Grant NZ --- In lpc2000@yahoogroups.com, "nonuckingfumber" <nonuckingfumber@y...> wrote:
> > Lucky you.......I am in Europe, like Philips, and would just love to > be able to get small quantities at these prices! > > BTW, In the past I found the cheapest place to get the (scotish) FTDI > chips was from a shop in Australia....post included! > > What it is about you chaps down under.....how do you get your parts so > cheaply! I think I shall get my sister to do my European compnent > soucing, she lives on the banks peninsular south of Christchurch, that > should be remote enougth to get cheap prices :-) > > > > --- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > > > Thanks Don, > > Adilam are asking $20us for these parts when Digikey lists them for > $11us. > > If Adilam are the only option I have to take it. > > > > Once again thanks Don, > > > > Grant > > > > > > --- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > > > > > > gtechnzltd wrote: > > > > Hi there, > > > > > > > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A > supplier > > > > a bit closer than www.digikey.com would be great to reduce frieght > > costs. > > > > > > > > Is any one in NZ using this Part? > > > > > > > > Thanks for your time. > > > > Grant > > > > Chch NZ > > > > > > > > > > > > > > > > > > Adilam is the company, both Auckland & Christchurch > > > > > > -- > > > Cheers > > > > > > Don > > > > > >
2006-01-16 by nonuckingfumber
--- In lpc2000@yahoogroups.com, "lpc2100_fan" <lpc2100_fan@y...> wrote: > > Hi, > > the digikey prices are very much international. There is always > shipping and handling which can be a lot if you buy only one device > but their prices if you order a few are very good. > For Germany go: > http://de.digikey.com/ and type LPC2138 in the search window (prices > in Euro) > For the UK go here: > http://dkc1.digikey.com/uk/digihome.html > prices in Pound Sterling > > May be this helps you to get good prices in Europe. Yes it does, thanks. I'm actually in Italy so the german Euro site is the most appropriate if I can manage the German! I had "known" about digikey. Years ago I ordered from the US but it took eons to arrive by surface mail and courier cost an arm and a leg. I did not know they had bases in Europe now, or that they had such a good range, I have found tons of interesting stuff. Thanks again! > > Bob > > > --- In lpc2000@yahoogroups.com, "nonuckingfumber" > <nonuckingfumber@y...> wrote: > > > > Lucky you.......I am in Europe, like Philips, and would just love to > > be able to get small quantities at these prices! > > > > BTW, In the past I found the cheapest place to get the (scotish) FTDI > > chips was from a shop in Australia....post included! > > > > What it is about you chaps down under.....how do you get your parts so > > cheaply! I think I shall get my sister to do my European compnent > > soucing, she lives on the banks peninsular south of Christchurch, that > > should be remote enougth to get cheap prices :-) > > > > > > > > --- In lpc2000@yahoogroups.com, "gtechnzltd" <gtechnzltd@y...> wrote: > > > > > > Thanks Don, > > > Adilam are asking $20us for these parts when Digikey lists them for > > $11us. > > > If Adilam are the only option I have to take it. > > > > > > Once again thanks Don, > > > > > > Grant > > > > > > > > > --- In lpc2000@yahoogroups.com, Don Ingram <don@l...> wrote: > > > > > > > > gtechnzltd wrote: > > > > > Hi there, > > > > > > > > > > I'm in New Zealand and want to get Qty 10 of LPC2138 parts. A > > supplier > > > > > a bit closer than www.digikey.com would be great to reduce frieght
> > > costs. > > > > > > > > > > Is any one in NZ using this Part? > > > > > > > > > > Thanks for your time. > > > > > Grant > > > > > Chch NZ > > > > > > > > > > > > > > > > > > > > > > > Adilam is the company, both Auckland & Christchurch > > > > > > > > -- > > > > Cheers > > > > > > > > Don > > > > > > > > > >
2006-01-16 by Piotr Zbysinski - EP(H)
You can try here: http://www.kamami.pl/?id_k1=87&id_k2=56&id_k3=6 Prices are in PLN, if you need EUR all prices divide by 4. Piotr