RE: [motm] Re: New Member Greeting aka Test
2000-06-21 by keithw@cix.compulink.co.uk
In-Reply-To: Ta! ... Keith http://home.freeuk.net/lowpass
Messages
Browse messages
Page 563 of 690 · 34488 messages matched
[OT] VB help
2000-06-21 by Paul Schreiber
If anybody out there HAS VB5 or 6 and has time this weekend to help me with something, please email me PRIVATELY, ie don t just respond! Paul S.
Re: [motm] Own a piece of history!
2000-06-21 by Al Wagner
Wow... I almost bought one of these as my 1st synth!!! They had one on display at the local Radio Shack so it was also the 1st synth I had ever touched and
Re: RE: [motm] Own a piece of history!
2000-06-21 by ivancu@aol.com
In a message dated 06/21/2000 7:01:52 AM, tentochi@columbus.rr.com writes:
Own a piece of history!
2000-06-21 by Paul Schreiber
Here is one of 2 MG-1s I m selling off. My buddy Steve is running the bidding. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=361602791 I m keeping one
Noisy MOTM-110
2000-06-21 by Paul Schreiber
I was building a batch of MOTM-110s tonight and had 1 that had the dreaded noisy pot problem. Trouble was, this pot had never been on a panel! And, it was a
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by ivancu@aol.com
In a message dated 6/20/00 9:22:30 PM, jhaible@debitel.net writes:
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by J. Larry Hendry
I think the more proper price in the US is $250 to $300 these days. $350 is a bit high IMHO. Larry H.
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by Thomas Hudson
... I found one for sale, but they want $350 for it. I m still debating that price (not having heard one). I use to play through a real one until I got tired
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by jhaible
... I m not sure how close it is. My schemos are not very readable, so I had to make some assumptions. Also, I used 13700 s instead of 3280 s in the LFOs. ...
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by Thomas Hudson
... Note to self: Read entire thread before responding. Tomy
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by Thomas Hudson
... Did you clone it exactly, or did you substitute any parts? Larry mentioned having one and wanting to modify the rolloff for more high end. I want to clone
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by jhaible
... Exactly ! One thing I wanted to do for a long time ! JH.
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by J. Larry Hendry
My only complaint with the unit us that the LPF is fixed to emulate the Hammond / Leslie frequency response. I would have much preferred to have the roll off
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by J. Larry Hendry
I agree. I have one and will NEVER part with it. Larry H
Re: [motm] lag processor question...
2000-06-21 by J. Larry Hendry
If you use the combination of both the UP& DOWN and the UP and the DOWN to maximum, the lag time can probably be measured in hours, many minutes for sure. I
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by jhaible
... The crazy thing is that Dynacord could not even come close to this with their later models. And I don t think it s that old analog vs. digital question -
RE: [motm] Own a piece of history!
2000-06-21 by Tentochi
It is already at $290 with 4 1/2 days left. I think my original estimate might be a little low now. And furthermore, it looks like Paul took this picture on
RE: [motm] Own a piece of history!
2000-06-21 by Tentochi
Or depending on your wife, one knob. I bought my MG-1 for $30 about 4 years ago and I think they are realistically (no pun intended) worth about $75 or$100.
Re: [motm] OT: Dynacord CLS-222
2000-06-21 by jhaible
... finally ... them ... Best Lesley simulation ever. They are so cheap now - grab it if you see one. These contain 4 BBD lines, btw. I have two, one original
Re: [motm] lag processor question...
2000-06-20 by Chad Conger
Aha..... thanks for the explanations and ideas Ken & JB & Paul S. A big cartoon-like light bulb has appeared above my head.... Chad.
Re: [motm] lag processor question...
2000-06-20 by Nathan Alan Hunsicker
oooops, my mistake. -nate
Re: [motm] lag processor question...
2000-06-20 by Paul Schreiber
Sure, 30-40 seconds easy! Paul S. ... From: Nathan Alan Hunsicker To: Sent: Tuesday, June 20, 2000 5:35 PM Subject:
Re: [motm] lag processor question...
2000-06-20 by Nathan Alan Hunsicker
and if remember correctly, i don t think the 820 lag has a lag time as high as 30 seconds. I think it was around 5 sec or shorter. -Nate
RE: [motm] My MOTM DarkStar - (was Blacet-MOTM adaptor)
2000-06-20 by Dave Bradley
You are correct sir! Moe
Re: [motm] lag processor question...
2000-06-20 by jwbarlow@aol.com
Damn! This patch won t work in the way I described since the 820 appears to have no HOLD input (a gate input which holds the output constant regardless of the
OT: Dynacord CLS-222
2000-06-20 by J. Larry Hendry
I promised someone on this list schematics of the CLS-222. Well, I finally found them and have the copies made and cannot remember who I promised them to.
Re: [motm] My MOTM DarkStar - (was Blacet-MOTM adaptor)
2000-06-20 by J. Larry Hendry
... And, (correct me if I am wrong Dave) this screening is to be done on Paul s regular blank MOTM panels that he sells. So, this is screening only for those
Re: [motm] VC Lag module
2000-06-20 by J. Larry Hendry
It looks right to me Dave. The Beta models were bare PCBs, so there is no way to be certain of the jack order. BUT, the pots are in the right order, it has
Re: [motm] lag processor question...
2000-06-20 by jwbarlow@aol.com
... Yet another explanation: Suppose you input a square wave to the LAG PROCESSOR INPUT. Then adjust the output curve to be linear. In the ideal case,
VC Lag module
2000-06-20 by Dave Bradley
To anyone who has seen or beta tested the lag processor: Is the attached panel mockup which I did ages ago still accurate? If not, what s different? Moe
RE: [motm] My MOTM DarkStar - (was Blacet-MOTM adaptor)
2000-06-20 by Hugo Haesaert
Hi All ! We need them with studs All together now ..... ;-) Cheers . Keep em oscillating :) Hugo =
lag processor question...
2000-06-20 by Chad Conger
A while back there was some discussion about the uses of a Lag processor, and I remember one of the uses was using it as a 6 db filter... How does a lag
Re: [motm] lag processor question...
2000-06-20 by Paul Schreiber
A lag is a simple RC filter (where the R is variable). So, if you put in audio, it acts as a 1-pole lowpass filter. This is a 6dB/Octave slope. Paul S. ...
RE: [motm] lag processor question...
2000-06-20 by Tkacs, Ken
A lag is an integrator, which in a mumbo-jumbo way is a one-pole low-pass filter. I m no EE, so I can t explain this as well as others might. Even a
RE: [motm] Saturday Night Modular Musings
2000-06-20 by David Bivins
Boy, just substitute my 28-year old friend Aaron for your son, and that s exactly how Aaron reacted when he first got to play with my modular ;) Hopefully
RE: [motm] (was Blacet-MOTM adaptor) Pulse divider
2000-06-20 by Brousseau, Paul E (Paul)
Hmmm... here s a brain hiccup: Audio In - Pulse Divider In Pulse Divider Out - EG Trigger (gate?) EG Out - VCA Trigger Audio In - VCA Audio In VCA Audio
Re: [motm] (was Blacet-MOTM adaptor) Pulse divider
2000-06-20 by The Old Crow
... A source of a pulse or pulses is needed. Note that this does not have to be anything in particular: the input is similar to those of an MOTM-120 in that
(was Blacet-MOTM adaptor) Pulse divider
2000-06-20 by thomas white
I would be interested in the blacet Delay panel and also a blacet Final Filtre panel. IMHO, I recommend this filter to all of you who are curious. I have had
RE: [motm] My MOTM DarkStar - (was Blacet-MOTM adaptor)
2000-06-20 by Dave Bradley
I don t want to say more before plans firm up, but several of us are talking with a goal to setting up a service for MOTM diyers, which provides high quality
RE: [motm] Re: New Member Greeting aka Test
2000-06-20 by Tkacs, Ken
Yes it can, welcome! ... From: keithw@cix.compulink.co.uk [mailto:keithw@cix.compulink.co.uk] Sent: Tuesday, 20 June, 2000 7:45 AM To: motm@egroups.com Cc:
Re: New Member Greeting aka Test
2000-06-20 by keithw@cix.compulink.co.uk
In-Reply-To: Hullo? can this be seen? Keith http://home.freeuk.net/lowpass
Re: [motm] ribbon contrller yet again!
2000-06-20 by davevosh@aol.com
In a message dated 00-06-20 00:10:13 EDT, you write:
Re: [motm] ribbon controller yet again!
2000-06-20 by J. Larry Hendry
I appreciate that review. Never have put my hands on one. Larry H
RE: [motm] interesting 120 loop
2000-06-20 by Paul Wagorn
oh, i forgot... there is no sequencing going on, either!
Re: [motm] ribbon contrller yet again!
2000-06-20 by jwbarlow@aol.com
... I ve seen references to this (most recently from Grant Richter on diy) but I ve tried on a couple of different occasions to measure the resistance of a
interesting 120 loop
2000-06-20 by Paul Wagorn
Hi All... I was playing around with the lfo -- 120 trick & recorded it for fun.. aside from the kick drum, there is NO SOUND SOURCE. it s the 420 filter
Re: [motm] ribbon contrller yet again!
2000-06-20 by davevosh@aol.com
In a message dated 00-06-19 23:06:57 EDT, you write:
Re: [motm] ribbon contrller yet again!
2000-06-20 by davevosh@aol.com
In a message dated 00-06-19 21:53:40 EDT, you write:
Re: [motm] ribbon controller yet again!
2000-06-20 by ivancu@aol.com
In a message dated 6/19/00 10:37:02 PM, jlarryh@iquest.net writes: I bought it and sold it the same