OBERHEIM SYNTH

Thank you Wesley
Gave it a go, typed CEM3396, and CEM 3399 with a space.
There is only one of one that will fit the Matrix 1000, used, and its 32.00 plus shipping.
all the ones for 5 to 10 that you mentioned are ONLY the wide body.
And can not be used in the Matrix 1000. They just wont fit.
but thank you anyway.
 


--- On Sun, 13/1/13, wesleyknick <wesknick@...> wrote:


From: wesleyknick <wesknick@...>
Subject: [oberheim] Re: Matrix-6/ -6R tuning
To: oberheim@yahoogroups.com
Date: Sunday, 13 January, 2013, 14:22



  



Type in 'CEM 3396'

--- In oberheim@yahoogroups.com, Jill Saphic wrote:
>
> hello Wesley
> thank you for that.
> so, what would I type in the search box at eBay?
> 3396? or what?
> what would you type in?
> thank you
> 
> 
> --- On Sun, 13/1/13, wesleyknick wrote:
> 
> 
> From: wesleyknick 
> Subject: [oberheim] Re: Matrix-6/ -6R tuning
> To: oberheim@yahoogroups.com
> Date: Sunday, 13 January, 2013, 5:39
> 
> 
> 
> Â  
> 
> 
> 
> If those 3396's are cooked internally then they're done. My best answer for the failure would be that something else upstream in the circuitry is wearing out possibly causing stress and eventual failure on them. ...just a guess without a whole lot of basis at this point. The CEM 3396 is still a pretty cheap IC to replace and available from a few Ebay sellers for as cheap as $5 or $6 a piece, not much compared to a CEM 3310, 3320 or 3360, etc. that can go from as low as $40 to $50 on up.
>