OBERHEIM SYNTH

Now that I've got my 6R up and running, I would like to program my control freak for it so 
that I can control it with knobs.  It has a matrix 1000 setup already but that doesn't work 
so far with the M6. Can somebody help me out with the sysex strings I need for parameter 
changes.  So far I've got the general:

F0H  beginning of sysex
10H Oberehim code
06H For the M6R device ID
<opcode>
<data bytes>
F7H

But if somebody could fill me in with an example of say the VCF control string, I could 
probably figure the rest out. I need to figure out what the opcodes and the data bytes are 
for each parameter.  I have found this text on the internet which I have been trying to 
reference but can't quite figure it out without seeing a full string or a couple full strings.:




Statistics:     134 Bytes/Single Patch
          = 268 nybbles transmitted + 5 bytes Header + 1 byte Checksum + 1
byte EOX
          = 275 total transmitted bytes/Single Patch


Byte        Parameter     # Bits     Description

0 - 7          6 each     Patch Name
                         Each character is represented by the lower 6
bits of it's ASCII
     representation.

8          48     2     Keyboard Mode
                         0 = Reassign
                         1 = Rotate
                         2 = Unison
                         3 = Reassign w/ Rob

9          00     6     DCO 1 Initial Frequency
                         LSB = 1 Semitone

10          05     6     DCO 1 Initial Waveshape
                         0 = Sawtooth
                         31 = Triangle

11          03     6     DCO 1 Initial Pulse Width

12          07     2     DCO 1 Fixed Modulations
                         Bit 0 = Lever 1
                         Bit 1 = Vibrato

13          06     2     DCO 1 Waveform Enable
                         Bit 0 = Pulse
                         Bit 1 = Wave

14          10     6     DCO 2 Initial Frequency
                         LSB = 1 Semitone

15          15     6     DCO 2 Initial Waveshape
                         0 = Sawtooth
                         31 = Triangle

16          13     6     DCO 2 Initial Pulse Width

17          17     2     DCO 2 Fixed Modulations
                         Bit 0 = Lever 1
                         Bit 1 = Vibrato

18          16     3     DCO 1 Waveform Enable
                         Bit 0 = Pulse
                         Bit 1 = Wave
                         Bit 2 = Noise

19          12     6 (signed)     DCO 2
Detune


Byte        Parameter     # Bits     Description

20          20     6     Mix

21          08     2     DCO 1 Fixed Modulations
                         Bit 0 = Portamento
                         Bit 1 = Not used

22          09     1     DCO 1 Click

23          18     2     DCO 2 Fixed Modulations
                         Bit 0 = Portamento
                         Bit 1 = Keyboard Tracking Enable

24          19     1     DCO 2 Click

25          02     2     DCO Sync Mode

26          21     7     VCF Initial Frequency
                         LSB = 1 Semitone

27          24     6     VCF Initial Resonance

28          25     2     VCF Fixed Modulations
                         Bit 0 = Lever 1
                         Bit 1 = Vibrato

29          26     2     VCF Keyboard Modulation
                         Bit 0 = Portamento
                         Bit 1 = Keyboard

30          30     6     VCF FM Initial Amount

31          27     6     VCA 1 (Exponential) Initial Amount

32          44     6     Portamento Initial Rate

33          46     2     Lag Mode
                         0 = Constant Speed
                         1 = Constant Time
                         2 = Exponential
                         3 = Exponential

34          47     1     Legato Portamento Enable

35          80     6     LFO 1 Initial Speed

36          86     2     LFO 1 Trigger
                         0 = No Trigger
                         1 = Single Trigger
                         2 = Multi Trigger
                         3 = External Trigger

37          87     1     LFO 1 Lag Enable
38          82     3     LFO 1 Waveshape (see Table 1)
39          83     5     LFO 1 Retrigger point
40          88     5     LFO 1 Sampled Source Number
41          84     6     LFO 1 Initial Amplitude


this is only a partial list,

anyways,

Thanks
Brian