OBERHEIM SYNTH

here's the deal....

my m1000 only plays 2 voices

after a reset, recalibration, etc it still plays 2 voices

when i go to ext function 5 (unit number) and set it to 1 or higher, suddenly all 6 voices are 
available

it's not in group mode, nor in unison mode and only has midi in connected

i can't seem to get it back to its original default settings

any suggestions?

could it be the memory backup battery running low? are the rest of the configuration settings maintained during power off?

why would this make the unit act this way?

upon further trials it seems to be a function of the midi channel assigment

when set to omni - only 2 voices

when set to channel 1 - all 6 voices

only the midi "in" cable is connected

and yes the battery is fine because the settings are maintained during power off

any thoughts out there?







--- In oberheim@...m, "Margus Kliimask" <margus.kliimask@...> wrote:

>
> could it be the memory backup battery running low? are the rest of the
> configuration settings maintained during power off?
> 
> 
> 
> 
> On 2/19/07, eightiescrisis <eightiescrisis@...> wrote:
> >
> >   here's the deal....
> >
> > my m1000 only plays 2 voices
> >
> > after a reset, recalibration, etc it still plays 2 voices
> >
> > when i go to ext function 5 (unit number) and set it to 1 or higher,
> > suddenly all 6 voices are
> > available
> >
> > it's not in group mode, nor in unison mode and only has midi in connected
> >
> > i can't seem to get it back to its original default settings
> >
> > any suggestions?
> >
> > 
> >
>