OBERHEIM SYNTH

i'm trying to use the mod matrix to control things like the filter with midi cc.

i've setup lever 3 as controller #2 (also tried this with lever 2), and routed the lever to vcf 
Freqency in the mod matrix.  'controllers' is set to 'on' in the master edit section (parameter 
02), but when I send cc information, nothing happens.  what am i doing wrong?

any help would be appreciated!

ok, i think i answered my own question in case anyone else is wondering about this.

seems like only a certain number of things can share vcf freq as a destination in the mod 
matrix, i made sure lever 3 was the only thing going to the filter and it worked.  doesn't seem 
to work on 'midi mono' mode though, which is sort of a bummer.

--- In oberheim@yahoogroups.com, "wavplant" <waveplant@...> wrote:
>
> i'm trying to use the mod matrix to control things like the filter with midi cc.
> 
> i've setup lever 3 as controller #2 (also tried this with lever 2), and routed the lever to vcf 
> Freqency in the mod matrix.  'controllers' is set to 'on' in the master edit section 
(parameter 

> 02), but when I send cc information, nothing happens.  what am i doing wrong?
> 
> any help would be appreciated!
>