When I tried what you describe hear (to press the Execute in "sound number" mode so that a dot appears), there´s no sound in the upper third of the keyboard. Without the dot there´s sound on the entire keyboard. How do I get it to work?
I´m shure that I´m going to like this cryptics the day I understand them :D
--- On Mon, 4/27/09, tim_wisecup wrote:
From: tim_wisecup Subject: [prophet2000] Re: Problem with built in sounds
To: prophet2000@yahoogroups.com
Date: Monday, April 27, 2009, 8:24 PM--- In prophet2000@ yahoogroups. com, "duncan" wrote:
>
> >>I've tested the 8 voices and they all work fine.<<
>
> how? can you drive the machine yet? if you can, then you will be able to establish whether the rom waveforms are loading into ram correctly by using the voice-edit mode to audition each sound location in turn.
>
> the simplest way to do this is select preset one, then (with the execute button unlit) select sound location 1 (top left of the matrix, & use the parameter knob/buttons to select "1"), & press "execute" so that a dot appears in the display. you will then be able to play sound 1 over it's entire range, without any keyboard mapping applied. repeat this for each sound, but bear in mind that the balance control & voice allocation setup may have an effect on what you hear.
>
> I should say it's very unlikely that the waveforms would be damaged without there being other o/s problems, but you never know...
>
> fwiw, in my 2002, all 16 locations have something in them, & they are all the same size (16).
>
> duncan.
>
ok, i haven't read the entire manual yet, but i have came to a section telling that the presets should work right off. that's when i jumped and tried them, and not having them all work made me think something was bad. i guess i figured that the presets themselves couldn't be overwritten and were stored on the rom permanently along with the waveforms themselves.
so, i have done as you suggested and the sounds worked! but, i only have 1-8 working, not 1-16 as you say you have. maybe a difference in the models? i confess i do need to read the rest of the manual, but i have actually looked for this info and didn't find much about it.
at any rate, thanks for your help.