BTW, Winecountry's OB8 disk is awesome! --- In prophet2000@yahoogroups.com, Henrik <sequenrik@...> wrote: > > Hi. The P2 library is quite big. It takes up four pages at Winecountrysequential: http://www.winecountrysequential.com/page10.html > > --- On Mon, 2/8/10, edo <edoardo.arengi@...> wrote: > > From: edo <edoardo.arengi@...> > Subject: [prophet2000] Re: Nothing but "nd" > To: prophet2000@yahoogroups.com > Date: Monday, February 8, 2010, 1:28 PM > > > > > > > > Â > > > > > > > > > > Hello! > > > > After unmounting, cleaning and remounting the drive various times unsuccessfully I decided to buy a new drive at winecountry. It's not cheap but it fixed the problem. Now everything works. > > I have 2 Prophets (1x Prophet 2002 256K with the new drive and 1x Prophet 2002 plus 512K with the original drive). If I format a floppy with the first, the second says iF (incorrect format?) when I try to save something on it. But if I save a disk in the first, the second can read it without problems. Then I noticed that there are some disks that are read with no problems with the new drive but not with the old one. And other disks behave the opposite! Mysteries... > > > > A little OT question: did Sequential offer an own sample library? I only have 2 original Sequential disks (1986, for the 512K version: #875-01EX REV A and #875-02EX REV A, unfortunately they don't work!). Are these the only disks ever made by Sequential? > > > > Thanks > > > > Edo > > > > --- In prophet2000@ yahoogroups. com, "got_hatchet" <tomhikon@ .> wrote: > > > > > > So how did you fix the ND error? Im having the same problem and was watching your posts. > > > > > > --- In prophet2000@ yahoogroups. com, Rob Miller <huskies@> wrote: > > > > > > > > Edo, > > > > > > > > I was able to disassemble my original drive and carefully clean the > > > > transport rod that the head goes on. It was full of dried lubricant, > > > > acting like glue. > > > > > > > > Rob > > > > > > > > edo_arengi wrote: > > > > > Hi all! > > > > > > > > > > It's me again! I found some info regarding my problem searching the forum: "Lh" means "locked head" so my floppy drive is probably gone. > > > > > What a great forum! I am happy to have a Prophet VS and now this new 2002, I hope to get it up and running :-) > > > > > > > > > > Edo > > > > > > > > > > > > > > > > > > > > --- In prophet2000@ yahoogroups. com, "edo_arengi" <edoardo.arengi@ > wrote: > > > > >> Hi! > > > > >> > > > > >> I just joined this group. Today I got an used 2002 and unfortunately I have problems with the floppy drive. But istead of getting the "nD" message I get again and again a bliking "Lh" message. If I i.e. choose to format a floppy I put into the drive, the drive gives a spin, the red light lights for 1 second or so and I get that "Lh" on the screen. > > > > >> > > > > >> Any idea? > > > > >> > > > > >> Thank you! > > > > >> > > > > >> Edo > > > > >> > > > > >> > > > > >> > > > > >> --- In prophet2000@ yahoogroups. com, Rob Miller <dpc318@> wrote: > > > > >>> Well, I replaced the 7406 buffer chip between the floppy controller and > > > > >>> the drive, and while the individual logic is better on the chip, it > > > > >>> did not resolve my "nD" issue. > > > > >>> > > > > >>> My drive seems to be spinning all the time while a disk is in it, > > > > >>> with the red LED on. Is this normal? I don't remember. > > > > >>> > > > > >>> Rob > > > > >>> > > > > >>> Henrik wrote: > > > > >>>> > > > > >>>> > > > > >>>> It was a temporary problem on mine. Now it works again. > > > > >>>> > > > > >>>> --- On *Tue, 10/13/09, Rob Miller /<dpc318@>/* wrote: > > > > >>>> > > > > >>>> > > > > >>>> From: Rob Miller <dpc318@> > > > > >>>> Subject: Re: [prophet2000] Re: Nothing but "nd" > > > > >>>> To: prophet2000@ yahoogroups. com > > > > >>>> Date: Tuesday, October 13, 2009, 3:03 AM > > > > >>>> > > > > >>>> > > > > >>>> > > > > >>>> Well, I might be making some progress. There's a "buffer" chip, a 7406, > > > > >>>> that's identified as U201. It sits between the floppy controller and > > > > >>>> the header P202. On two of the hex inverted pairs they don't seem to > > > > >>>> be inverting the signals. Namely, pins 1/2 and 3/4. > > > > >>>> > > > > >>>> Does anyone have a clean copy of the schematics? I'm having a hard > > > > >>>> time ready what each of the pins do on the online version. This is > > > > >>>> on what appears to be drawing SD 2000-2. > > > > >>>> > > > > >>>> This is a very inexpensive part, so I might just pull it, socket > > > > >>>> a new one, and try. > > > > >>>> > > > > >>>> Rob > > > > >>>> > > > > >>>> Henrik wrote: > > > > >>>> > Same problem here too. > > > > >>>> > > > > > >>>> > --- On Thu, 10/8/09, j. aaron <tomkah@yahoo. com > > > > >>>> </mc/compose? to=tomkah% 40yahoo.com> > wrote: > > > > >>>> > > > > > >>>> > From: j. aaron <tomkah@yahoo. com > > > > >>>> </mc/compose? to=tomkah% 40yahoo.com> > > > > > >>>> > Subject: Re: [prophet2000] Re: Nothing but "nd" > > > > >>>> > To: prophet2000@ yahoogroups. com > > > > >>>> </mc/compose? to=prophet2000% 40yahoogroups. com> > > > > >>>> > Date: Thursday, October 8, 2009, 10:51 PM > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > ive experienced this same problem > > > > >>>> > > > > > >>>> > the original 2002 drive died, so i picked up a suitable > > > > >>>> replacement on ebay > > > > >>>> > > > > > >>>> > making sure the jumpers were correctly aligned > > > > >>>> > > > > > >>>> > same thing, ...drive powers up, disc takes a spin and then 'nd' > > > > >>>> > > > > > >>>> > since that drive only cost me $10, i decided id try buying another > > > > >>>> > > > > > >>>> > suitable replacement off ebay (different model than the first), > > > > >>>> that i also jumper configured correctly and got the the same result > > > > >>>> ...'nd' > > > > >>>> > > > > > >>>> > i tried switching things around a bit but sort of gave up on it > > > > >>>> at that point > > > > >>>> > > > > > >>>> > im still over $40 ahead of the $70 whine country wanted for a new > > > > >>>> one, > > > > >>>> > > > > > >>>> > so i figured eventually ill try getting another one off ebay sometime > > > > >>>> > > > > > >>>> > and repeat the process, but i really couldnt find a reason why > > > > >>>> those drives werent functioning > > > > >>>> > > > > > >>>> > this discussion has rekindled my interest in getting my 2002 > > > > >>>> going again > > > > >>>> > > > > > >>>> > i put a ton of work into sampling back in the late 80's/early 90's > > > > >>>> > > > > > >>>> > and id like to revisit some of those sounds > > > > >>>> > > > > > >>>> > ...heres hoping help arrives! > > > > >>>> > > > > > >>>> > -yeller > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > --- On Thu, 10/8/09, Rob Miller <dpc318@sbcglobal. net> wrote: > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> >> From: Rob Miller <dpc318@sbcglobal. net> > > > > >>>> > > > > > >>>> >> Subject: Re: [prophet2000] Re: Nothing but "nd" > > > > >>>> > > > > > >>>> >> To: prophet2000@ yahoogroups. com > > > > >>>> > > > > > >>>> >> Date: Thursday, October 8, 2009, 12:06 PM > > > > >>>> > > > > > >>>> >> I didn't change the jumper on the > > > > >>>> > > > > > >>>> >> factory drive that selects DS0, and > > > > >>>> > > > > > >>>> >> the replacement from WC doesn't have any. The power > > > > >>>> > > > > > >>>> >> cord has to flip > > > > >>>> > > > > > >>>> >> between the stock and the replacement (and the > > > > >>>> > > > > > >>>> >> replacement instructions > > > > >>>> > > > > > >>>> >> indicate so). I have flipped back and forth the data > > > > >>>> > > > > > >>>> >> cable, since there > > > > >>>> > > > > > >>>> >> is no real keying to it. > > > > >>>> > > > > > >>>> >> I hope it's not the driver chip. I can replace > > > > >>>> > > > > > >>>> >> it, but it should would > > > > >>>> > > > > > >>>> >> be easier not to. The drive spins up on power up, but > > > > >>>> > > > > > >>>> >> doesn't seem to > > > > >>>> > > > > > >>>> >> seek when I try to move data to/from it. > > > > >>>> > > > > > >>>> > > > > > >>>> >> I'll keep poking around and see if I can get the right > > > > >>>> > > > > > >>>> >> combo working > > > > >>>> > > > > > >>>> >> now. I appreciate the forum's help! > > > > >>>> > > > > > >>>> >> Rob > > > > >>>> > > > > > >>>> > > > > > >>>> >> duncan wrote: > > > > >>>> > > > > > >>>> >>> have you got the jumpers in the right place on the > > > > >>>> > > > > > >>>> >> drives? I hope when you say "flipped" you don't mean > > > > >>>> > > > > > >>>> >> "reversed".. .. I killed a floppy drive doing this by > > > > >>>> > > > > > >>>> >> accident. > > > > >>>> > > > > > >>>> >>> the floppy disc driver chip is fairly standard, I > > > > >>>> > > > > > >>>> >> think, but would be a tricky job to replace.... > > > > >>>> > > > > > >>>> > > > > > >>>> >>> I have the boards from my 2000, which had a dead > > > > >>>> > > > > > >>>> >> keyboard controller (which WC couldn't help with- it was a > > > > >>>> > > > > > >>>> >> custom IC)... let me see if I can locate anything useful on > > > > >>>> > > > > > >>>> >> them for you, & let me know how you get on. I have to > > > > >>>> > > > > > >>>> >> strip some bits off them for another forum member whose > > > > >>>> > > > > > >>>> >> patience must be running out by now.... :-/ I've been a bit > > > > >>>> > > > > > >>>> >> busy this year.... > > > > >>>> > > > > > >>>> > > > > > >>>> >>> --- In prophet2000@ yahoogroups. com, > > > > >>>> > > > > > >>>> >> Rob Miller <dpc318@> wrote: > > > > >>>> > > > > > >>>> >>>> I'm hoping I can get some help here.... > > > > >>>> > > > > > >>>> > > > > > >>>> >>>> My 2000 is now running 4.3b with a brand new > > > > >>>> > > > > > >>>> >> drive...but it STILL > > > > >>>> > > > > > >>>> >>>> gives me "nd" (no disk) whenever I try to do > > > > >>>> > > > > > >>>> >> anything with the > > > > >>>> > > > > > >>>> >>>> drive. I can't read factory disks on power > > > > >>>> > > > > > >>>> >> up, nor can I load > > > > >>>> > > > > > >>>> >>>> single sounds, and I can't format a disk. I > > > > >>>> > > > > > >>>> >> get the same "nd" > > > > >>>> > > > > > >>>> >>>> every time. > > > > >>>> > > > > > >>>> > > > > > >>>> >>>> I've flipped the drive cable, and now have two > > > > >>>> > > > > > >>>> >> drives (original > > > > >>>> > > > > > >>>> >>>> and WineCountry new one) and they perform the > > > > >>>> > > > > > >>>> >> same. > > > > >>>> > > > > > >>>> > > > > > >>>> >>>> Rob > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> >> ------------ --------- --------- ------ > > > > >>>> > > > > > >>>> > > > > > >>>> >> Yahoo! Groups Links > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> >> mailto:prophet2000- fullfeatured@ yahoogroups. com > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > > >>>> > > > > >>>> > > > > >>>> > > > > > > > > > > > > > > > > > > > > > > > > > ------------ --------- --------- ------ > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Message
Re: Nothing but "nd"
2010-02-09 by Tomhikon