Hi Again Geoff
Do you mean you soldered wires to the back of the
volume pot , then to the jack on the underside of the Wurli for line output
?
What i did was take my signal directly from the
speaker outs on the board , this was obviously wrong as the signal was too hot
and quite noisy.
Is the above solution better ? is it relatively
noiseless ? and lastly...
do you have an links to info about doing this
?
Thanks
Stephen
----- Original Message -----From: Geoff WoodSent: Tuesday, February 24, 2004 8:59 AMSubject: RE: [vintagesynthrepair] wurli 206A chop-----Original Message-----
From: Stephen Richards [mailto:synthwar@...]
Sent: Monday, February 23, 2004 7:13 PM
To: vintagesynthrepair@yahoogroups.com
Subject: [vintagesynthrepair] wurli 206A chopHello to allI just bought a wurlitzer 206A and need to get some info / schematics.I have removed the keyboard fron the speaker box and disconnected the switching box...I need to find out how to connect mains power to the Wurli and also how to wire the output from the board to the output jack on the bottom of the Wurli.Will the output be at line level ?Hi Steve,I've just done this. Output line9ish level from back of vol pot. I mounted some speakers in the top, but am unsure as to wheteher or not to keep them.Also there is:.... for more.geoff