Vintage Synth Repair

-----Original Message-----
From: Stephen Richards [mailto:synthwar@...] 
Sent: Wednesday, February 25, 2004 6:34 PM
To: vintagesynthrepair@yahoogroups.com
Subject: Re: [vintagesynthrepair] wurli 206A chop


Hi Again Geoff
 
Do you mean you soldered wires to the back of the volume pot , then to
the jack on the underside of the Wurli for line output ? 
 
Yup.   But watch out for the mains voltage switch on the back. I didn't
- ouch.
 
What i did was take my signal directly from the speaker outs on the
board , this was obviously wrong as the signal was too hot and quite
noisy. 
 
That way it would be going thru the power amp - too hot signal level and
all the extra noise and distortion from the PA.. 
 
Is the above solution better ? is it relatively noiseless ? and
lastly...
do you have an links to info about doing this ?  
 
I found a cct diagram somewhere, but can't remember.  Ask on the Wurly
group and somebody will steer you right.
 
cheers
 
geoff 
 
Thanks
 
Stephen

----- Original Message ----- 
From: Geoff Wood <mailto:geoff@...>  
To: vintagesynthrepair@yahoogroups.com 
Sent: Tuesday, February 24, 2004 8:59 AM
Subject: RE: [vintagesynthrepair] wurli 206A chop

 

-----Original Message-----
From: Stephen Richards [mailto:synthwar@...] 
Sent: Monday, February 23, 2004 7:13 PM
To: vintagesynthrepair@yahoogroups.com
Subject: [vintagesynthrepair] wurli 206A chop


Hello to all
 
I just bought a wurlitzer 206A and need to get some info / schematics.
 
I have removed the keyboard fron the speaker box and disconnected the
switching box...
 
I need to find out how to connect mains power to the Wurli and also how
to wire the output from the board to the output jack on the bottom of
the Wurli.
 
Will the output be at line level ? 
 
Hi Steve,
 
I've just done this.  Output line9ish level from back of vol pot. I
mounted some speakers in the top, but am unsure as to wheteher or not to
keep them.
 
Also there is:
mailto:wurlitzer_elec_piano-subscribe@yahoogroups.com 
.... for more.
 
geoff 



Yahoo! Groups Sponsor	

ADVERTISEMENT


 
<http://rd.yahoo.com/SIG=12cm50nvk/M=274551.4550177.5761904.1261774/D=eg
roupweb/S=1705032144:HM/EXP=1077773643/A=2019528/R=2/SIG=141aq6dn9/*http
://ad.doubleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz
=300x250;code=18634;dcopt=rcl;ord=1077687243937137?> Click HereClick
Here 
 
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb/S=:HM/A=2019528/rand=903647461> 	


  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/vintagesynthrepair/
  

*	To unsubscribe from this group, send an email to:
vintagesynthrepair-unsubscribe@yahoogroups.com
<mailto:vintagesynthrepair-unsubscribe@yahoogroups.com?subject=Unsubscri
be> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .