Emu XL-7 & MP-7 User's Group

Thanks! After some fiddling I managed to get it to work.
Again thanks for your help!

Cheers,

Danny

--- In xl7@yahoogroups.com, "gonzinigonz" <gonzini@...> wrote:
>
> > > I have a xl-7 and recently bought an boss sp 505 sampler.
> > > At the moment I'm having trouble sending program changes
> > > to the sampler, trouble, because I don't know how to do
> > > this and I can't find it in the manual either!
>  
> Ok, Pattern Edit > scroll to EVENT editor.
> Cursor down to the bottom left, set midi channel for program change.  
> Cursor next block right.
> Use the data wheel to select prog. cursor right to select program No 
> with data wheel. 
> Then next blocks set the bank No. so you can access programs above 127. 
> and in differant banks.
> MSB (most significant bit)CC:0 LSB (least significant bit)CC:32
> A bit confusing maybe, have a look for bank select messages in the 
> manual. (download the PX-7 PDF if your on firmware V2.0)
> 
> Also check enable program receive in your SP505 if its an option.
> Dont forget to set up the XL track parameters to it sends the message 
> where you want it to go.
>