Not being in front of my Xpander too,- but typing from my head:
go to [Master] page > [MIDI] > select the MIDI channel Xpander will listen to
go to [Zone] > [Input] > set Zone 1 to the same channel ...
so, if you have set both p.ex. to [5], Xpander will listen to MIDI on channel 5.
double check the [Limits] (keyrange) is set to 0-127 and [Mode] is set to "rotate",- this works for 6 voice poly.
double check for MIDI controllers being assigned to levers, switches, pedal 1 & 2.
In case you don\ufffdt hear anything, which can happen when you switch between single and multi patch mode back and forth by some reason,- send a MIDI CC#7 value 127 volume command from your master keyboard controller.
Am 11.03.2013 23:24, schrieb endofcommon@...:
\ufffdUntil recently I had my my Xpander on its own midi buss, but due to
some setup thinning out, it now needs to share a midi bus (1 Midi out
from a Emagic MT-4) with other synths but I cannot seem to set it
correctly in single mode to receive on just one midi channel, it wants
to respond to all channels, could someone please go over these steps
with me please, I must be missing something. Thank you, e
OB Xpander
Processor v1.2
Voice v1.4
Casette v1.0