Xpantastic!

just realized that I have the matrix 12 pdf manual here at work... 


it looks like you need to set it in the zone itself, or in multiple zones if you have the voices mapped out that way. It looks like the basic channel is used for program changes. "Thus Patch Changes are global commands and Notes and Controllers are tied in to the ZONES or individual channel settings in VASSIGN" 




----- Original Message -----
From: endofcommon@... 
To: xpantastic@yahoogroups.com 
Sent: Monday, March 11, 2013 3:42:29 PM 
Subject: Re: [xpantastic] Xpander Midi Recieve Channel 






Xpander Master Midi channel is set to Ch1 (Master, Midi, Channel), Logic is sending out on Ch. 1 (tested all other channels working correctly). Has it to do with midi zones/ (master/midi/zones) perhaps ? Again this is in single mode. Thanks, e 



On Mar 11, 2013, at 6:17 PM, Ancient Eyeball Recipe wrote: 







Well, my guess would be that either the xpander doesn't have its midi channel set to one (I think that the default may be 'omni', which would produce your symptoms), OR you're channelizing the output incorrectly through your DAW, which can be easy to do. 


In any case, I'm not in front of my matrix 12 at the moment, but logically that's what comes to mind. 

----- Original Message -----
From: endofcommon@... 
To: xpantastic@yahoogroups.com 
Sent: Monday, March 11, 2013 3:24:05 PM 
Subject: [xpantastic] Xpander Midi Recieve Channel 






Until recently I had my my Xpander on its own midi buss, but due to 
some setup thinning out, it now needs to share a midi bus (1 Midi out 
from a Emagic MT-4) with other synths but I cannot seem to set it 
correctly in single mode to receive on just one midi channel, it wants 
to respond to all channels, could someone please go over these steps 
with me please, I must be missing something. Thank you, e 

OB Xpander 
Processor v1.2 
Voice v1.4 
Casette v1.0