Thanks; I have done it, Tom, after being disconnected, the light sensitive resistor varies from 195 Ohm (no pressure) to 175 Ohm (max pressure) Is it correct in your valuable opinion? F Il giorno 01/mag/2012, alle ore 13:33, Quazimodo ha scritto: > With a meter on ohms. I would disconnect the LDR from the circuit whilst checking..! > > Cannot say what the spec should be but if there is no touch sense - there will be no meter movement...and there should be "some". > > Cheers, > TOM > > --- In yamahacs80@yahoogroups.com, "papinje" <fernandozarone@...> wrote: > > > > Hello. > > the touch control in a SY 1 does not work. With TC sensitivity potentiometer at its maximum, the touch controlled effects go to the maximum, but are not modified by the key pressure. > > Inside the machine, the lamp is lit, the "shield" moves well. What to check? How can I test the light variable resistor? > > Every help is appreciated� > > Fernando > > > > [Non-text portions of this message have been removed]
Message
Re: [yamahacs80] SY-1 problem
2012-05-01 by Fernando Zarone