Yamaha CS80

Thanks, Laurie--that makes sense, and describes my synth's behaviour perfectly.  One less thing to worry about!  ;)

And sorry pyjamagroove--sounds like the issue you're experiencing is altogether different.


On 2013-05-23, at 8:27 PM, Laurie Curry wrote:

> 
> Just to demonstrate an example of this "common issue" you are experiencing with the kyb control playing in and out of ranges with sustain I engaged....
> http://slammah.xanga.com/audio/7bdae2131276/
> 
>  
> -----Original Message-----
> From: "Laurie Curry" <laurie@...>
> To: yamahacs80@yahoogroups.com
> Date: 05/23/13 21:18
> Subject: Re: [POSSIBLE SPAM] Re: [yamahacs80] Is CS80 actually self-oscillating or I have another problem?
> 
>      
> that is how the CS80 works....there are both sustain modes.... I and II.... pitch and filter are disabled in Sus 1 on releasing notes... in Sus ii , filter and amplitude changes in the Kyb Control 
> zones will add or subtract releasing portions in other zones.... if you have a note in the middle in release... and go to a negative amplitude in a different key zone, the note in the middle will also drop in level...
> -----Original Message-----
> > From: "T.M. Bois" <bucklehorse@...>
> > To: yamahacs80@yahoogroups.com
> > Date: 05/23/13 15:29
> > Subject: [POSSIBLE SPAM] Re: [yamahacs80] Is CS80 actually self-oscillating or I have another problem?
> >
> > For what it's worth, the Keyboard Control Brilliance and Level both occasionally cause wonky things to happen on mine--especially on patches with long sustain enabled and while triggering multiple voices. I can't put it into words just now, but it seems to interfere with/defeat the filter and/or VCA envelopes of the triggered voices--i.e. the envelopes will suddenly be wide open on all sounding voices.
> >
> > I remember reading that this was a relatively common issue--but perhaps someone with a 100% healthy CS80 (if such a thing exists!) can chime in as to whether they're all a bit buggy with the keyboard VCF/VCA tracking engaged.
> >
> >
> > On 2013-05-23, at 1:14 PM, pyjamagroove wrote:
> >
> > > If I go to the panel mode (both channels) and turn all VCOS, noise and sine off, both VCF up -then I put overall brilliance and keyboard control brilliance up and press like 6 or more keys at the same time, I hear high sine sound and actually a little VCO in the background and some noise clipping while pressing those keys. I ve noticed this playing presets like brass with all the brilliance up. Do you guys have the same effect or there is something wrong with my CS80?
> > >
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> 
> [Non-text portions of this message have been removed]
> 
> 



[Non-text portions of this message have been removed]