200e

oops

On Mon, May 4, 2009 at 8:12 PM, ezra buchla <ezra.buchla@gmail.com> wrote:

> i'm not sure what you mean by the "227e mike in" if not the rear XLR jack.
> that is the only input. the two 1/8" jacks on the panel are parallel
> OUTPUTS.
>
>
> On Mon, May 4, 2009 at 8:04 PM, amnesia <amni56@tpg.com.au> wrote:
>
>>
>>
>> HI Ezra
>>
>> Should have the 250e back next week :-) missed it
>>
>> I am inputting the mic into the 227e mike in then the out env follower
>> into a volt/oct...if i try and use the audio out of the mike/env into
>> say channel 4 its really quiet...I havent tried the xlr on the back
>>
>> Ross
>>
>>
>> ezra buchla wrote:
>> >
>> >
>> > hm.... you used the xlr jack on the rear panel? you tried different
>> > settings
>> > of the pre-amp gain (the button)? anything coming out the audio output?
>> >
>> > 261e out -> xlr input should probably come out kinda loud and
>> distorted...
>> > its a lot of gain...
>> >
>> > On Mon, May 4, 2009 at 7:52 PM, cray5656 <amni56@tpg.com.au<amni56%40tpg.com.au>
>> > <mailto:amni56%40tpg.com.au <amni56%2540tpg.com.au>>> wrote:
>> >
>> > >
>> > >
>> > > last night i tried for the first time the MIKE/ MIC in to do some env
>> > > following...all i got was a really quiet signal, I thought that was
>> > strange
>> > > because i did the same thing with my serge and it was really
>> > loud....so then
>> > > i decided to put the output of the 261 into the mic in , and still
>> > it was
>> > > really quiet i pressed the attenuation buttons but no change.....I
>> > am not
>> > > sure if this is normal?
>> > > I am talking the mic in on the 227e
>> > >
>> > > Anyone
>> > >
>> > > Anyone
>> > >
>> > > Bueler
>> > >
>> > >
>> > >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>> >
>>  
>>
>
>


[Non-text portions of this message have been removed]