Yahoo Groups archive
Messages
Page 195 of 307 · 15341 messages matched
2005-08-17 by Laurinyecz Zoltán
Hi >i am beginner in atmel, i have been studying for couple of weeks now theoritically, i need some help on avrstudio4 to start working pratically .if anybody knows >links for avrstudio4 tutors please send the link thanks I have also just started with AVR and I am also using AVRS
2005-08-17 by klassasin
I was just wondering, what are the main differences between avr c compilers? Is it mainly the header files used, or the special functions each compiler offers? Thanks for clearing this up for me, Kevin
2005-08-17 by Jim Wagner
Try: http://www.avrbeginners.net/ Jim On Tue, 16 Aug 2005 23:12:52 -0700 (PDT) haben jemal wrote: > HI, > > i am beginner in atmel, i have been studying for couple > of weeks now theoritically, i need some help on > avrstudio4 to start working pratically . > if anybody knows link
2005-08-17 by Javier Fiasche
Atmel has application notes regarding AT keyboard interface both in assembler and C. Dont remember if they are for 8051 or AVR. Look at Atmel.com Regards. Javier ----- Original Message ----- From: Lupe To: AVR-Chat@yahoogroups.com Sent: Wednesday, August 17, 2005 3:02 AM Subject:
2005-08-17 by Javier Fiasche
Logo is a mini PLC of Siemens. Its available here in Argentina, dont know if its also in other parts of the world with the same name. Regards Javier ----- Original Message ----- From: Thomas Keller To: AVR-Chat@yahoogroups.com Sent: Wednesday, August 17, 2005 12:47 AM Subject: Re
2005-08-17 by Svenn (Symetrics)
Hi Haben Jemal Try www.avrfreaks.net Svenn :) ----- Original Message ----- From: haben jemal To: avr-chat@yahoogroups.com Sent: Wednesday, August 17, 2005 8:12 AM Subject: [AVR-Chat] (unknown) HI, i am beginner in atmel, i have been studying for couple of weeks now theoritically,
2005-08-17 by Sousa, Nick
Logo is a siemens PLC. From what I know, it is not capable of online monitoring. It has a serial port for downloading software, but I believe that's all its used for. -----Original Message----- From: Don Kinzer [mailto:dkinzer@easystreet.com] Sent: Tuesday, August 16, 2005 11:09
2005-08-17 by Jesper Hansen
Hmmm, let me see.... www.atmel.com Yes ! They have. :-) > does Atmel have an Internet capability? please mail me at > jvendrellir@yahoo.com. > > thanks so much. >
2005-08-17 by vendrell99
does Atmel have an Internet capability? please mail me at jvendrellir@yahoo.com. thanks so much.
2005-08-17 by Leon Heller
----- Original Message ----- From: To: Sent: Wednesday, August 17, 2005 12:40 AM Subject: Re: [AVR-Chat] 3 Volts LCD? > > > > > > Hi, > Many thanks for all answers however where do you get Power Tip LCDs? > I hope they are not too expensive. They are about the same price as the o
2005-08-17 by haben jemal
HI, i am beginner in atmel, i have been studying for couple of weeks now theoritically, i need some help on avrstudio4 to start working pratically . if anybody knows links for avrstudio4 tutors please send the link thanks __________________________________________________ Do You
2005-08-17 by Lupe
Hello all, I am in need of some basic assembly code for my ps2 keyboard to 8515 micro project. I do have some code but it is way to long for my level of expertise and obviously won't work. If I can start with a very short example, I believe I can expand on it. I just need somethi
2005-08-17 by Thomas Keller
On Wed, 2005-08-17 at 03:09 +0000, Don Kinzer wrote: > --- In AVR-Chat@yahoogroups.com, Thomas Keller wrote: > > > > and then to logo > > Logo? perhaps you meant to type "logon?" Evenso, not sure I > > understand what you mean by this. > I assumed that the reference was to the Lo
2005-08-17 by Kathy Quinlan
Dave VanHorn wrote: > (apparently this didn't make it, the first two times I sent it, so > I'm plugging it in again from the web interface.) > > > I'm not sure if this is an on-chip problem, or off chip.. > > I have a T26, measuring current by a differential measurement, using >
2005-08-17 by Don Kinzer
--- In AVR-Chat@yahoogroups.com, Thomas Keller wrote: > > > and then to logo > > Logo? perhaps you meant to type "logon?" Evenso, not sure I > understand what you mean by this. I assumed that the reference was to the Logo language. My understanding is that Logo was designed espec
2005-08-16 by JChavez@soboce.com
Hi, Many thanks for all answers however where do you get Power Tip LCDs? I hope they are not too expensive. Javier "Leon Heller" @yahoogroups.com con fecha 16/08/2005 12:14:09 a.m. Por favor, responda a AVR-Chat@yahoogroups.com Enviado por: AVR-Chat@yahoogroups.com Destinatarios:
2005-08-16 by Thomas Keller
On Tue, 2005-08-16 at 19:09 +0000, riza1pk wrote: > hi > this is my first mail to group welcome. > i am working on my final year project can i want to replace the analog > module of plc in my project therefore i have to design a > miicrocontroller interface card(the graphic displ
2005-08-16 by Dennis
----- Original Message ----- From: "Dan Holt" To: "Dennis" ; "Ben Garza" Sent: Tuesday, August 16, 2005 3:27 PM Subject: RE: [AVR-Chat] ATmega 168 > Sorry Dennis, > I was traveling and your email got lost in my INBOX. > We will not be phasing out the DIP packaged parts anytime so
2005-08-16 by Dennis
Thanks. Have some ordered. The only disty I didn't check. Dennis ----- Original Message ----- From: "Dave Hylands" To: Sent: Tuesday, August 16, 2005 12:25 PM Subject: Re: [AVR-Chat] ATmega 168 > Anyone know of a source for ATmega 168 in P-DIP package. Atmel sample > stock > is d
2005-08-16 by Dave Hylands
> Anyone know of a source for ATmega 168 in P-DIP package. Atmel sample stock > is down to zippo on the 28 pin plastic. DigiKey has some in stock (I checked a few minutes ago). $4.11/qty 1 -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/
2005-08-16 by riza1pk
hi this is my first mail to group i am working on my final year project can i want to replace the analog module of plc in my project therefore i have to design a miicrocontroller interface card(the graphic display is to be viewed on pc)for this i am using RS232 but i have to send
2005-08-16 by Dennis
I had "ES" packages, i.e. preproduction. INT1 is like the Kingston Trio song about Charlie on the MTA. He got on and never returned. All other INTs work. If they phase out P-DIPs will they supply adapters to the SDK500? Maybe my friendly rep can find out. Or maybe apps engineer i
2005-08-16 by Thomas Keller
On Tue, 2005-08-16 at 11:45 -0500, Dennis wrote: > Anyone know of a source for ATmega 168 in P-DIP package. Atmel sample > stock is down to zippo on the 28 pin plastic. > Bummer since SDK500 uses only DIP packs. Have checked disty stock and > seems to be in the same shape as Atme
2005-08-16 by Dennis
Anyone know of a source for ATmega 168 in P-DIP package. Atmel sample stock is down to zippo on the 28 pin plastic. Bummer since SDK500 uses only DIP packs. Have checked disty stock and seems to be in the same shape as Atmel sample stock. Thanks Dennis
2005-08-16 by Larry Barello
One real simple test to isolate the problem: Swap CPUs between a working board and a failing board. My money is on the board, not the CPU, as the source of the problem. -----Original Message----- From: AVR-Chat@yahoogroups.com [mailto:AVR-Chat@yahoogroups.com] On Behalf Of Jim Wa
2005-08-16 by Jim Wagner
Dave - When you say that this is a mature system, does that mean that it used to work properly and isn't now? One of the potential problems with differential measurement is keeping the common-mode voltage within allowable limits. Normally, however, you would expect lower sensitiv
2005-08-16 by Robert Adsett
At 02:35 PM 8/16/05 +0000, Dave VanHorn wrote: >I'm not sure if this is an on-chip problem, or off chip.. > >I have a T26, measuring current by a differential measurement, using >the G=20 amplifier. > >Explaining the whole thing in detail would be tedious, but I'm doing >high sid
2005-08-16 by Dave VanHorn
(apparently this didn't make it, the first two times I sent it, so I'm plugging it in again from the web interface.) I'm not sure if this is an on-chip problem, or off chip.. I have a T26, measuring current by a differential measurement, using the G=20 amplifier. Explaining the w
2005-08-16 by Hans Kallen
Hi Javier, You may want to look at the Display-On-Glass modules from Electronic Assembly, they can be interfaced in 4-bit or 8-bit parallel mode, or in SPI mode which saves CPU pins. There are LED backlights in various colors available that also operate from a 3.3V supply. Here's
2005-08-16 by Leon Heller
----- Original Message ----- From: To: Sent: Tuesday, August 16, 2005 1:41 AM Subject: [AVR-Chat] 3 Volts LCD? > > > > > Hi all, > > Does anyone know if there is 3 Volts 2x16 LCDs? I mean HD44780 style. > If so where I can buy them? The Powertip LCDs I use will go down to 2.7V: h
2005-08-16 by JChavez@soboce.com
Hi all, Does anyone know if there is 3 Volts 2x16 LCDs? I mean HD44780 style. If so where I can buy them? TIA, Javier
2005-08-15 by Robert Rademacher
Hello all, I found this lcd routines from avrfreaks.net - and want to improve on this one - and then save it to AVR-Chat files folder on AVR-Chat Yahoo Groups to be shared by our AVR-Chat members. Maybe you can help on correcting these routines to make it right. Cheers, Robert ==
2005-08-15 by Mike Perks
Hi, I have finally finished the documentation for my dual motor controller. It has the following features: Uses L6205 dual H-bridge driver that supports up to 2.8A and is in a 20 pin DIP package On-board regulators for 12V and 5V power supplies Driver logic for enable, sign/magni
2005-08-15 by Mike Perks
John Samperi wrote: > At 09:17 AM 15/08/2005, you wrote: > >I made my own super fast (115,200 baud) AVR910 ISP compatible > >programmer. > > Thanks for the reference to my version...it makes me feel important :-) > > Do you still need AVRprog to use your programmer? If so then yo
2005-08-15 by John Samperi
At 09:17 AM 15/08/2005, you wrote: >I made my own super fast (115,200 baud) AVR910 ISP compatible >programmer. Thanks for the reference to my version...it makes me feel important :-) Do you still need AVRprog to use your programmer? If so then you will still be limited in speed b
2005-08-15 by Russell Shaw
John Samperi wrote: > At 01:54 AM 15/08/2005, you wrote: > >>Also seems to quite like. trashing the osc fuse settings of the >>first device programmed after >>startup (probably an AVR Studio bug) > > > The unfortunate thing I found, and complained about, it the > automatic readin
2005-08-15 by tvelliott
I just had my parallel port smoke from programming as well. I went down to bestbuy and bought a USB to PARPORT adaptor (Although they guy working there told me there was no such thing...) I looked on the shelf and there it was. Works great. That might at least get you going again
2005-08-14 by Ralph Hilton
On Sun, 14 Aug 2005 18:17:39 -0500 you wrote: >John Samperi wrote: > >> At 01:03 AM 15/08/2005, you wrote: >> >Is it possible to purchase a WORKING programming dongle that will >> replace my >> >current no good totally useless piece of Kanda crap STK200 dongle. >> >> Hmmm....I th
2005-08-14 by Mike Perks
John Samperi wrote: > At 01:03 AM 15/08/2005, you wrote: > >Is it possible to purchase a WORKING programming dongle that will > replace my > >current no good totally useless piece of Kanda crap STK200 dongle. > > Hmmm....I thought everybody knew about AVRISP or STK500 :-) > > I h
2005-08-14 by John Samperi
At 07:00 AM 14/08/2005, you wrote: > My question is: What's the difference between files ended .rom and .hex It is probably that the files were compiled/assembled with different tools and they have different default outputs. For instance with Studio you can select the type of out
2005-08-14 by John Samperi
At 01:54 AM 15/08/2005, you wrote: >Also seems to quite like. trashing the osc fuse settings of the >first device programmed after >startup (probably an AVR Studio bug) The unfortunate thing I found, and complained about, it the automatic reading of the fuses and lock bits at sta
2005-08-14 by John Samperi
At 01:03 AM 15/08/2005, you wrote: >Is it possible to purchase a WORKING programming dongle that will replace my >current no good totally useless piece of Kanda crap STK200 dongle. Hmmm....I thought everybody knew about AVRISP or STK500 :-) I have been using the humble AVR910 kit
2005-08-14 by Mike Harrison
On Mon, 15 Aug 2005 01:37:15 +1000, you wrote: >Lasse Madsen wrote: >> Is it possible to purchase a WORKING programming dongle that will replace my >> current no good totally useless piece of Kanda crap STK200 dongle. >> >> It must work from 1.8V to 5V and support standard SPI pr
2005-08-14 by Russell Shaw
Lasse Madsen wrote: > Is it possible to purchase a WORKING programming dongle that will replace my > current no good totally useless piece of Kanda crap STK200 dongle. > > It must work from 1.8V to 5V and support standard SPI programming. > > I'm fed up with my damn Kanda device
2005-08-14 by Lasse Madsen
Is it possible to purchase a WORKING programming dongle that will replace my current no good totally useless piece of Kanda crap STK200 dongle. It must work from 1.8V to 5V and support standard SPI programming. I'm fed up with my damn Kanda device letting me down once every month
2005-08-14 by embedded_emd
Hi to all! Is it possible to use FPGA to inerface the Atmega 128 with 32-bit CardBus PC Card. Or else we can omit the FPGa and directly interface with AVR?
2005-08-14 by Thomas Keller
On Sat, 2005-08-13 at 20:38 +0000, Stefan Wimmer wrote: > ...and there are disadvantages: > IIRC nobody already mentioned the different time zones many of the > participants of the mailing list live in. At times when I am able to > connect to the IRC channel, probably no one of y
2005-08-13 by Laurinyecz Zoltán
Hi to all, I'm running a kind of equipment for data acquisition at my company. I also repair them when it is necessary. They involves in two kind of processor (Mega128 and AT90S4433) I have all the firmwares of processors of course to upload them after replacing faulty processors
2005-08-13 by Stefan Wimmer
--- In AVR-Chat@yahoogroups.com, Thomas Keller wrote: > > Never the less, there are advantages to a realtiome chat environment > which are inarguable, and worth having available. one would hope that > ifg a solution is developed during such conversations, it might be > mentioned
2005-08-13 by Javier Fiasche
Don't know if it would work , but what about writing the hex with some hex editor like hexworkshop, saving it as an .bin file ande than translating it with atmel's bit2hex.exe???? Would it work??? Regards. Javier ----- Original Message ----- From: erikc To: AVR-Chat@yahoogroups.c