Message 14447
2012-01-20 by sania safdar
kindly some one quide me about atmega88 programing in Avrstudio enviroment Best Regards Sania Safdar [Non-text portions of this message have been removed]
Thread
Message 14447
Re: [AVR-Chat] (unknown)
2012-01-21 by hamidreza maddah
Avrstudio is not good for programming. i use it for simulate --- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote:
Show quoted textHide quoted text
From: sania safdar <see_wide_sea@yahoo.com>
Subject: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Friday, January 20, 2012, 12:35 AM
kindly some one quide me about atmega88 programing in Avrstudio enviroment
Best Regards
Sania Safdar
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]Re: [AVR-Chat] (unknown)
2012-01-21 by sania safdar
so wat enviroment u recomend for programing? Best Regards Sania Safdar ________________________________
Show quoted textHide quoted text
From: hamidreza maddah <hamidrezamaddah@yahoo.com> To: AVR-Chat@yahoogroups.com Sent: Saturday, January 21, 2012 2:09 PM Subject: Re: [AVR-Chat] (unknown) Avrstudio is not good for programming. i use it for simulate --- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote: From: sania safdar <see_wide_sea@yahoo.com> Subject: [AVR-Chat] (unknown) To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com> Date: Friday, January 20, 2012, 12:35 AM kindly some one quide me about atmega88 programing in Avrstudio enviroment Best Regards Sania Safdar [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [AVR-Chat] (unknown)
2012-01-21 by Leon Heller
On 21/01/2012 11:01, sania safdar wrote: > so wat enviroment u recomend for programing? I use AVR Studio and a Dragon programmer/debugger. Leon -- Leon Heller G1HSM
Re: [AVR-Chat] (unknown)
2012-01-21 by hamidreza maddah
i recomend IAR , Keil, CodevisionAvr --- On Sat, 1/21/12, sania safdar <see_wide_sea@yahoo.com> wrote:
Show quoted textHide quoted text
From: sania safdar <see_wide_sea@yahoo.com>
Subject: Re: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Saturday, January 21, 2012, 3:01 AM
so wat enviroment u recomend for programing?
Best Regards
Sania Safdar
________________________________
From: hamidreza maddah <hamidrezamaddah@yahoo.com>
To: AVR-Chat@yahoogroups.com
Sent: Saturday, January 21, 2012 2:09 PM
Subject: Re: [AVR-Chat] (unknown)
Avrstudio is not good for programming. i use it for simulate
--- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote:
From: sania safdar <see_wide_sea@yahoo.com>
Subject: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Friday, January 20, 2012, 12:35 AM
kindly some one quide me about atmega88 programing in Avrstudio enviroment
Best Regards
Sania Safdar
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]Re: [AVR-Chat] (unknown)
2012-01-21 by sania safdar
keil? keil can be used for avr programing? Best Regards Sania Safdar ________________________________
Show quoted textHide quoted text
From: hamidreza maddah <hamidrezamaddah@yahoo.com> To: AVR-Chat@yahoogroups.com Sent: Saturday, January 21, 2012 6:30 PM Subject: Re: [AVR-Chat] (unknown) i recomend IAR , Keil, CodevisionAvr --- On Sat, 1/21/12, sania safdar <see_wide_sea@yahoo.com> wrote: From: sania safdar <see_wide_sea@yahoo.com> Subject: Re: [AVR-Chat] (unknown) To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com> Date: Saturday, January 21, 2012, 3:01 AM so wat enviroment u recomend for programing? Best Regards Sania Safdar ________________________________ From: hamidreza maddah <hamidrezamaddah@yahoo.com> To: AVR-Chat@yahoogroups.com Sent: Saturday, January 21, 2012 2:09 PM Subject: Re: [AVR-Chat] (unknown) Avrstudio is not good for programming. i use it for simulate --- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote: From: sania safdar <see_wide_sea@yahoo.com> Subject: [AVR-Chat] (unknown) To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com> Date: Friday, January 20, 2012, 12:35 AM kindly some one quide me about atmega88 programing in Avrstudio enviroment Best Regards Sania Safdar [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [AVR-Chat] (unknown)
2012-01-21 by hamidreza maddah
yes --- On Sat, 1/21/12, sania safdar <see_wide_sea@yahoo.com> wrote:
Show quoted textHide quoted text
From: sania safdar <see_wide_sea@yahoo.com>
Subject: Re: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Saturday, January 21, 2012, 5:33 AM
keil?
keil can be used for avr programing?
Best Regards
Sania Safdar
________________________________
From: hamidreza maddah <hamidrezamaddah@yahoo.com>
To: AVR-Chat@yahoogroups.com
Sent: Saturday, January 21, 2012 6:30 PM
Subject: Re: [AVR-Chat] (unknown)
i
recomend IAR , Keil, CodevisionAvr
--- On Sat, 1/21/12, sania safdar <see_wide_sea@yahoo.com> wrote:
From: sania safdar <see_wide_sea@yahoo.com>
Subject: Re: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Saturday, January 21, 2012, 3:01 AM
so wat enviroment u recomend for programing?
Best Regards
Sania Safdar
________________________________
From: hamidreza maddah <hamidrezamaddah@yahoo.com>
To: AVR-Chat@yahoogroups.com
Sent: Saturday, January 21, 2012 2:09 PM
Subject: Re: [AVR-Chat] (unknown)
Avrstudio is not good for programming. i use it for simulate
--- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote:
From: sania safdar <see_wide_sea@yahoo.com>
Subject: [AVR-Chat] (unknown)
To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com>
Date: Friday, January 20, 2012, 12:35 AM
kindly some one quide me about atmega88 programing in Avrstudio enviroment
Best Regards
Sania Safdar
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]programing in Avrstudio enviroment
2012-01-21 by greggy
Hi Sania It all rather depends on quite a few factors... Can you tell us a bit more about what you want to be able to do and what operating system you use? An idea about your experience would probably help as well. --greg --- In AVR-Chat@yahoogroups.com, sania safdar <see_wide_sea@...> wrote:
Show quoted textHide quoted text
> > kindly some one quide me about atmega88 programing in Avrstudio enviroment > > > Best Regards > Sania Safdar > > [Non-text portions of this message have been removed] >
Re: [AVR-Chat] (unknown)
2012-01-21 by Jim Wagner
This is total rubbish. Studio is fine for programming. Avoid Studio5 and it works very nicely. You WILL need a programming device, such as a Dragon, but that works very well with Studio, Jim Wagner Oregon Research Electronics On Jan 21, 2012, at 1:09 AM, hamidreza maddah wrote: > > > Avrstudio is not good for programming. i use it for simulate > > --- On Fri, 1/20/12, sania safdar <see_wide_sea@yahoo.com> wrote: > > From: sania safdar <see_wide_sea@yahoo.com> > Subject: [AVR-Chat] (unknown) > To: "AVR-Chat@yahoogroups.com" <AVR-Chat@yahoogroups.com> > Date: Friday, January 20, 2012, 12:35 AM > > > > kindly some one quide me about atmega88 programing in Avrstudio enviroment > > > > Best Regards > > Sania Safdar > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]
Re: [AVR-Chat] (unknown)
2012-01-23 by Bruce
Jim, I am a hobbyist. Been using Studio 4. Upgraded to Studio 5. I was so disappointed in 5, that I decided 4 wasn't broken and went back to Studio 4. Any idea what the deal with AVR and Studio 5 ? I hope this is not the future. Bruce On 1/21/2012 11:12 AM, Jim Wagner wrote: > This is total rubbish. Studio is fine for programming. Avoid Studio5 and it works very nicely. > > You WILL need a programming device, such as a Dragon, but that works very well with Studio, > > Jim Wagner > Oregon Research Electronics > On Jan 21, 2012, at 1:09 AM, hamidreza maddah wrote: > >> >> Avrstudio is not good for programming. i use it for simulate >> >> --- On Fri, 1/20/12, sania safdar<see_wide_sea@yahoo.com> wrote: >> >> From: sania safdar<see_wide_sea@yahoo.com> >> Subject: [AVR-Chat] (unknown) >> To: "AVR-Chat@yahoogroups.com"<AVR-Chat@yahoogroups.com> >> Date: Friday, January 20, 2012, 12:35 AM >> >> >> >> kindly some one quide me about atmega88 programing in Avrstudio enviroment >> >> >> >> Best Regards >> >> Sania Safdar >> >> [Non-text portions of this message have been removed] >> >> [Non-text portions of this message have been removed] >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > [Non-text portions of this message have been removed]
Re: [AVR-Chat] (unknown)
2012-01-23 by Jim Wagner
Studio5 has been the subject of extended discussion on the AVRFreaks web site. It has the potential for being pretty good, but there are currently many problems. These problems do seem to be repaired over time, but it is awfully slow and does NOT give me great confidence. This is somewhat bolstered by the apparent plan to continue updating the version of AVRgcc (to support new devices) in a way that works with Studio4. Jim Wagner On Jan 22, 2012, at 6:47 PM, Bruce wrote: > Jim, > > I am a hobbyist. Been using Studio 4. Upgraded to Studio 5. I > was so disappointed > in 5, that I decided 4 wasn't broken and went back to Studio 4. > > Any idea what the deal with AVR and Studio 5 ? I hope this is not > the future. > > Bruce > > On 1/21/2012 11:12 AM, Jim Wagner wrote: > > This is total rubbish. Studio is fine for programming. Avoid Studio5 and it works very nicely. > > > > You WILL need a programming device, such as a Dragon, but that works very well with Studio, > > > > Jim Wagner > > Oregon Research Electronics > > On Jan 21, 2012, at 1:09 AM, hamidreza maddah wrote: > > > >> > >> Avrstudio is not good for programming. i use it for simulate > >> > >> --- On Fri, 1/20/12, sania safdar<see_wide_sea@yahoo.com> wrote: > >> > >> From: sania safdar<see_wide_sea@yahoo.com> > >> Subject: [AVR-Chat] (unknown) > >> To: "AVR-Chat@yahoogroups.com"<AVR-Chat@yahoogroups.com> > >> Date: Friday, January 20, 2012, 12:35 AM > >> > >> > >> > >> kindly some one quide me about atmega88 programing in Avrstudio enviroment > >> > >> > >> > >> Best Regards > >> > >> Sania Safdar > >> > >> [Non-text portions of this message have been removed] > >> > >> [Non-text portions of this message have been removed] > >> > >> > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]
Re: [AVR-Chat] (unknown)
2012-01-23 by R E Purcella
The problem is that studio 4 doesn't support TPI programming, but studio 5 does. Updating gcc is fine, but can we get a firmware upgrade for programming platforms like stk500 to support TPI? Studio 5 isn't quite easy to use as 4, but eventually it worked for me. It appears to me like they intended studio5 to replace studio 4 and were going to move on. But we have digressed from the original topic. Did the 88 get programmed? no, to do ISP use an AVR programmer with an ISP (6 pin) cable and header setup. studio 4 should work fine to write, compile, simulate and program the 88. rep
Show quoted textHide quoted text
On 1/22/2012 7:00 PM, Jim Wagner wrote: > Studio5 has been the subject of extended discussion on the AVRFreaks web site. > > It has the potential for being pretty good, but there are currently many problems. These problems do seem to be repaired over time, but it is awfully slow and does NOT give me great confidence. This is somewhat bolstered by the apparent plan to continue updating the version of AVRgcc (to support new devices) in a way that works with Studio4. > > Jim Wagner > > On Jan 22, 2012, at 6:47 PM, Bruce wrote: > >> Jim, >> >> I am a hobbyist. Been using Studio 4. Upgraded to Studio 5. I >> was so disappointed >> in 5, that I decided 4 wasn't broken and went back to Studio 4. >> >> Any idea what the deal with AVR and Studio 5 ? I hope this is not >> the future. >> >> Bruce >> >> On 1/21/2012 11:12 AM, Jim Wagner wrote: >>> This is total rubbish. Studio is fine for programming. Avoid Studio5 and it works very nicely. >>> >>> You WILL need a programming device, such as a Dragon, but that works very well with Studio, >>> >>> Jim Wagner >>> Oregon Research Electronics >>> On Jan 21, 2012, at 1:09 AM, hamidreza maddah wrote: >>> >>>> Avrstudio is not good for programming. i use it for simulate >>>> >>>> --- On Fri, 1/20/12, sania safdar<see_wide_sea@yahoo.com> wrote: >>>> >>>> From: sania safdar<see_wide_sea@yahoo.com> >>>> Subject: [AVR-Chat] (unknown) >>>> To: "AVR-Chat@yahoogroups.com"<AVR-Chat@yahoogroups.com> >>>> Date: Friday, January 20, 2012, 12:35 AM >>>> >>>> >>>> >>>> kindly some one quide me about atmega88 programing in Avrstudio enviroment >>>> >>>> >>>> >>>> Best Regards >>>> >>>> Sania Safdar >>>> >>>> [Non-text portions of this message have been removed] >>>> >>>> [Non-text portions of this message have been removed] >>>> >>>> >>> >>> [Non-text portions of this message have been removed] >>> >>> >>> >>> ------------------------------------ >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >> [Non-text portions of this message have been removed] >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > >