Hi Jim,
Many thanks. No offence taken! I appreciate your clarification and
response.
I'm a little stuck now as I think I've confirmed that my JTAG ICE
doesn't work with the 644. This seems a bit crazy to me - JTAG is a
standard, and all the pins are the same between MkI and MkII.
Shouldn't it just be possible to update the software in the MkI ICE
or similar to make it work with the newer devices?
Best regards,
Andrew
--- In AVR-Chat@yahoogroups.com, "James Hatley" <james.hatley@...>
wrote:
>
> Sorry I thought you were looking in the list for an AVR644 which
won't be
> there ... but the ATmega644 may not be there either as some of the
newer
> processors need a different JTAG namely they require the MKII. I
gave up on
> JTAG here, I have a MK I and an ICE that I used for ATmega32 work.
Worked
> great but for newer work I just put in output were I need data and
have
> written an old fashion serial debug capability into my software. I
do just
> fine with old fashion techniques. JTAG when I was using it had a
pretty
> flaky studio and it was a pain.
>
> Study the documentation for the device you have and the processor.
You may
> be out of luck with the JTAG you have.
>
> I find the 644 a very nice chip and we just switch production from
the 32 to
> the 644. The 644 has more flash but for us it has an ability to
switch the
> processor clock divider from software which help keep the power
down.
>
> Anyway good luck, didn't mean to infer anything other that a miss-
read name
> like I've done many times.
>
> Jim
>
>
> ----- Original Message -----
> From: "anding_eunding" <anding_eunding@...>
> To: <AVR-Chat@yahoogroups.com>
> Sent: Saturday, June 24, 2006 2:48 PM
> Subject: [AVR-Chat] Re: JTAG programming for the AVR644
>
>
> > Yes, I'mean ATmega644. It exists; I have a few. Can anyone
offer
> > any clues on my original question?
> >
> > Many thanks,
> >
> > Andrew
> >
> > --- In AVR-Chat@yahoogroups.com, "James Hatley" <james.hatley@>
> > wrote:
> > >
> > > Is there a ATmega644 ... that's it.
> > >
> > > Jim
> > >
> > > ----- Original Message -----
> > > From: "anding_eunding" <anding_eunding@>
> > > To: <AVR-Chat@yahoogroups.com>
> > > Sent: Friday, June 23, 2006 10:34 PM
> > > Subject: [AVR-Chat] JTAG programming for the AVR644
> > >
> > >
> > > > I struggling to program an AVR644 (40DIP) with AVR Studio
4.12
> > SP2,
> > > > and an RS232 JTAG ICE programmer/debugger.
> > > >
> > > > Problem - AVR644 is not listed as a supported device for the
> > JTAG ICE.
> > > > Even though it apparently reads all the fuse and lock bits
OK,
> > > > programming ends in an error (FLASH Byte address is 0x00
should
> > be
> > > > 0x0C).
> > > >
> > > > I thought the AVR microcontrollers were quite
intercompatible.
> > Do I
> > > > have to buy a new programmer just for the AVR644, or am I
doing
Show quoted textHide quoted text
> > > > something wrong? I really hope I can program this with the
> > regular
> > > > JTAG ICE!
> > > >
> > > > Many thanks for your help in advance,
> > > >
> > > > Andrew
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>