Boss VF-1 Effect Processor

Hi,

I think you figured it out. I did not tried to toggle
the tuner but it's all the same method. I mean, first
of all you should designate a mid channel number to
related function on the vf-1 by editing the assings at
the master section. Then you should enter the same
channel number to the related patch's 8th button on
fcb.
The other parameters can be used as default.



--- David Spangler <spangler@...> wrote:

> Hi Cagan,
> 
>  
> 
> Thanks for the help!
> 
>  
> 
> After hours of reading the original manual and
> attempting to get an
> expression pedal to work for volume, I almost gave
> up. Then, I downloaded
> the current manual from the Behringer website. I
> followed the instructions
> to calibrate the expression pedals and, immediately,
> expression pedal A
> began working as a volume pedal.
> 
>  
> 
> Now, I\ufffdm hoping to figure out how to use expression
> pedal B as a toggle for
> the tuner. So far, no luck. Have you tried this?
> 
>  
> 
> Thanks again,
> 
>  
> 
> David
> 
>  
> 
>   _____  
> 
> From: BossVF1@yahoogroups.com
> [mailto:BossVF1@yahoogroups.com] On Behalf Of
> \ufffda\ufffdan CEBE
> Sent: Tuesday, December 20, 2005 4:30 AM
> To: BossVF1@yahoogroups.com
> Subject: Re: [BossVF1] Anyone using a Behringer
> FCB101 with Boss VF-1?
> 
>  
> 
> Hi David,
> I also use a fbc with my vf-1.
> 
> It is seems so complex at the beginning, but it is
> not
> !
> To use a pedal for expression,
> -on vf-1, go to the master section of the patch in
> question.
> -select the related assign number (assign 1, 2 and
> etc)
> -select the target (wah manual, foot volume etc)
> -target min and max should be 0 and 100
> -do not select source type as exp pedal, you should
> select the midi channel number here, like you said
> mid-7. This is the main trick in here
> -source mode should be normal
> -source min and max should be 0 and 127
> 
> Now you should configure the fcb,
> -you will either use 8th or 9th button-
> -for related patch, you will select the related exp
> pedal number by pushing it for 3 seconds in
> configuration mode
> -after the light comes, push once for editing the
> parameters, this time the light blinks
> -press "up" button once
> -when number light blinks at the panel, you should
> enter the midi channel number (same number that you
> entered to vf-1)
> -press "up" button again
> -then "value" light blinks at panel
> - you should enter the source min and max
> consecutively same as you entered to vf-1
> -after each section press "up" for saving parameters
> -at the end press down for 3 secnds.
> 
> 
> This is how I configure it out.
> 
> Regards...
> 
> Cagan
> 
> 
> 
> 
> --- spangler1941 <spangler@...> wrote:
> 
> > I am trying to use a FCB1010 with a Boss VF-1
> simply
> > to switch banks,
> > patches and control volume. So far it is baffling
> to
> > me. Mainly need
> > help how to configure the VF-1 to recognize an
> > expression pedal on the
> > FCB1010. I was doing fine with a Digitech Control
> 8
> > and set the VF-1
> > to MIDI 7 for the expression pedal in each patch.
> > But I like the 10
> > patch switches of the FCB1010 much better. Just
> need
> > to get one of the
> > expression pedals going.
> > 
> > Thanks, David Spangler in Texas
> > 
> > 
> > 
> > 
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 
> 
> 
> SPONSORED LINKS 
> 
> 
> Effects
>
<http://groups.yahoo.com/gads?t=ms&k=Effects+processor&w1=Effects+processor&
> c=1&s=23&.sig=onvvWZBJWA9SKnLgLNQeKA>  processor 
> 
>  
> 
>   _____  
> 
> YAHOO! GROUPS LINKS 
> 
>  
> 
> *	 Visit your group "BossVF1
> <http://groups.yahoo.com/group/BossVF1> "
> on the web.
>   
> *	 To unsubscribe from this group, send an email to:
>  BossVF1-unsubscribe@yahoogroups.com
>
<mailto:BossVF1-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> 
>   
> *	 Your use of Yahoo! Groups is subject to the
> Yahoo!
> <http://docs.yahoo.com/info/terms/>  Terms of
> Service. 
> 
>  
> 
>   _____  
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com