Casio CZ/ VZ/ FZ - Pro Series

I guess you executed the load commando inside the VZ-10?

Other than that you could try to reduce sent speed inside midi-ox by 
increasing the delay times inside the configure menue...


On 14 Dec 2006 at 0:43, j_sepeta wrote:

> I have a VZ10M that I'm having difficulty loading patches on.
> Here's the steps I've taken.
> 
> 1) connect VZ10M to my laptop using an M-Audio MidiSport Uno interface
> 2) on the VZ10M go to Menu3, turn off protection and change mode to
> Load / Midi/ Voice
> 3) change midi channels to 1 for in and out
> 4) open midiox, check options / midi devices to verify it recognizes
> midi in/out ports from uno.
> 5) select view / sysex
> 6) open .syx file with VZ10M patches.
> 
> i can watch the sysex file send, it's just that the VZ10M doesn't
> respond to it. I know that the midi interface works with other synths,
> and the vz10m's midi is fine because I'm able to trigger it with a
> keyboard (if I disconnect the Uno).
> 
> any suggestions? I've used Bomes SendSX with my m1 rack and tx802 rack
> and d550 rack with success, but it also fails to work with the VZ10M.
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
> 


-- 

CZ/VZ 		mailing list	: http://groups.yahoo.com/group/CZsynth
FMHeaven	mailing list	: http://groups.yahoo.com/group/fmheaven/
FS1R 		mailing list	: http://www.ampfea.org/mailman/listinfo/fss-list
Vokator		mailing list	: http://groups.yahoo.com/group/vokator

http://www.summasounds.de/