Casio CZ/ VZ/ FZ - Pro Series

There's still hope, since it sounds like you haven't initialized the
whole system yet.  Here's the procedure to reset the data for the
entire keyboard.

1. Turn the CZ-1 off.
2. Hold down the INITIALIZE button.
3. While still pressing the initialize button, turn CZ-1 on.
4. LCD will ask "SYSTEM ALL INITIALIZE (Y/N)?" Keep holding the
INITIALIZE button and also press the YES button.
5. If all goes well the LCD will say "SYSTEM INITIALIZED !!"

This could clear up a lot of problems you are having.  This is really
the first thing to do when getting a CZ out of storage, I think.

m¡ke



--- In CZsynth@yahoogroups.com, "Bryan Holland" <stingerholland@...>
wrote:
>
> hi everyone. like the title says, i've got a problem with my CZ-1.
> i recently pulled it out of the closet after a few years of sitting 
> around, and it was locked up. none of the keys or buttons were 
> working, and no sound at all. i replaced the lithium battery, and 
> while cleaning it found a 3/8 washer stuck in the cartridge port(you 
> gotta love kids!:D)  well, after removing the washer and initializing 
> the sysem, i ended up with bank A-1 and that's about it.
> about half of the buttons are still dead, but i have some hope.
> is it possible to reset it? or is that what the initialize function is 
> for?
> thanks
> Bryan
>