Casio CZ/ VZ/ FZ - Pro Series

have a vz-10m at power off it does revert back to mem protect on.Every time you turn it on you have to set it to the settings you want.Its just how it is.I use midi-ox to load banks.Always have to set to chanel 1 ,mem protect off ,and load.



________________________________
 From: steve_the_composer <smw-mail@...>
To: CZsynth@yahoogroups.com
Sent: Saturday, January 25, 2014 7:49 AM
Subject: [CZsynth] Re: re:Saving midi channel and sysex settings in Vz10m



 

I can only speak to the VZ-8m, but maybe its the same. I will check, but I am pretty sure that at power down the sysex enable reverts to disabled and memory protect reverts to on.

Whatever the case, it shouldn't drive you nuts--when you go to save, just enable those settings you want. That's the best advice I can give.

As for the channel, I will have to check.

Steve

--- In CZsynth@yahoogroups.com, <matthillier33@...> wrote:
>
> Hi , does anyone know if the vz10m auto saves channel and sysex ' on ' settings in its memory on boot down or should automatically ? do i need to save these with a patch ? keeps defaulting to channel 1 with sysex turned off.
>
>
>  thanks for any advice....its driving me nuts ...
>