Casio CZ/ VZ/ FZ - Pro Series

OK--I just went through most of the TOTAL CONTROL parameters for you. I compared which parameters reset themselves at power down and which were retained in memory. I am sure the VZ-10m has different settings but maybe the parameter retention is the same.

00 - MASTER TUNE - retained
01 - TRANSPOSE - retained
02 - MEM PROTECT - reset to OFF (I only checked INTERNAL)
03 - SAVE/LOAD - Load
---- CARD/MIDI - retained
---- DATA - retained
04 - CHANNEL - retained
---- TOTAL - retained
05 - MIDI DATA
---- PROGRAM - retained
---- EXCLUSIVE - reset to disabled
---- DEF CONTROL - retained
---- OVERFLOW - retained
06 - CARD FORMAT [not tested]

Anyhow, I hope this helps. I would encourage you to power up, change all the settings, write them down as you go, power down then up, and compare which settings have been reset and which have been maintained.

You should only need to do this once. Just be sure to check each menu items and each submenu item. Feel free to report your results here.

Hope this helps.

Steve

--- In CZsynth@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote:
>
> I can only speak to the VZ-8m, but maybe its the same. I will check, but I am pretty sure that at power down the sysex enable reverts to disabled and memory protect reverts to on.
> 
> Whatever the case, it shouldn't drive you nuts--when you go to save, just enable those settings you want. That's the best advice I can give.
> 
> As for the channel, I will have to check.
> 
> Steve
> 
> 
> --- In CZsynth@yahoogroups.com, <matthillier33@> wrote:
> >
> > Hi , does anyone know if the vz10m auto saves channel and sysex ' on ' settings in its memory on boot down or should automatically ? do i need to save these with a patch ? keeps defaulting to channel 1 with sysex turned off. 
> >  
> > 
> >  thanks for any advice....its driving me nuts ...
> >
>