Yahoo Groups archive

Casio CZ/ VZ/ FZ - Pro Series

Index last updated: 2026-04-28 22:42 UTC

Message

Re: [CZsynth] CZ-1 Internal Battery Replacement

2014-06-18 by Kev!

The first two numbers on a CR battery is the diameter in mm, i.e. 20mm. The last two numbers is the thickness. I.e. 3.2mm/2.5mm/1.6mm. The smaller the battery the less they last. They're all 3volts.


> On Jun 13, 2014, at 2:52 PM, "jeromestpierre@... [CZsynth]" <CZsynth@yahoogroups.com> wrote:
>
> Hi all,
>
> I am an happy CZ-1 owner since last week and while was planning to replace DPDT relay as described here (because the headphone outputs are noisy and the jack outputs have a very low volume) I also wanted to change the internal lithium battery.
>
> But surprisingly, after searching online and in this group, no one gave the battery reference when other folks where asking around. Some people guessed it's a CR2032 but no one confirmed. I already have CR2032 batteries at home but I would like to be sure I have all I need before I'll open the synth to do some work.
>
> Does anyone know if the CZ-1 is actually using CR2032 for patch backup or it's another battery reference?
>
> Thanks & best regards,
>
> Jérôme
>
>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.