2005-05-08 by M.J.B.
Thanks Steve,
Three questions:
1. Anyone figure out a way to get a cz-1 to
activate the full 64 voices on the ez-cz
cartridge because like Steve says, it doesn't
work correctly, you can only activate 32 voices.
2. Why does it seem that even though the CZ-1
was the top of the line that it doesn't have as
much options for it as regards cartridges,
editors and other stuff? I love that synth and
yet it seems like it is the most unloved of the
whole cz line?
3. One other thing, ARE YOU SURE the EZ-CZ
cartridge works on the cz-101? I thought the
EZ-CZ did not work on the cz-101's only the RA-6
cartridge.
Happy phasing-distoring,
micah
--- steve_the_composer <smw-mail@...>
wrote:
> It is indeed a 64 voice cartridge. The two
> switches are used to
> select how you access the banks. With the
> CZ-3000/CZ-5000 you can
> access A/B [16 patches] and C/D [16 patches]
> wthe the switches in one
> setting. To access another set of 32 patches
> (and to flip A/B with
> C/D) you need to move the switches.
>
> The four possibilities are:
>
> (1) A/B set 1 going to CZ A/B; C/D set 1 going
> to CZ C/D.
> (2) A/B set 2 going to CZ A/B; C/D set 2 going
> to CZ C/D.
> (3) C/D set 1 going to CZ A/B; A/B set 1 going
> to CZ C/D.
> (4) C/D set 2 going to CZ A/B; A/B set 2 going
> to CZ C/D.
>
> The switch settings for these configurations
> are:
>
> (1)
> X_
> X_
>
> (2)
> X_
> _X
>
> (3)
> _X
> X_
>
> (4)
> _X
> _X
>
> Where X represents the position of the switch
> when you are looking at
> the EZ-CZ right side up (hump on top/connector
> on bottom, switches on
> left side of the front.
>
> I believe this was done so that the CZ-101
> could access 4 different
> sets of 16 patches.
>
> Basically, you can leave the top switch in the
> left position and move
> the bottom switch to go from set 1 to set 2.
> (With both switches on
> the left, moving the top one will simply swap
> AB with CD [set 1].)
>
> Also, I don't think the banks work properly in
> the CZ-1.
>
> BTW, if you don't have the original packaging,
> it suggests to replace
> the batters within a year. (Of course, mine
> were still good after 5-8
> years of non-use.) The package also says memory
> will remain up to 5
> minutes while changing the batteries.
>
> But don't blame me if it doesn't. I'm just
> telling you what it says.
>
> Hope this helps.
>
> --Steve
>
> PS: If you have a digital camera, could you
> make and send me a jpg of
> the EZ-CZ showing the switches? If so, I will
> try to make a guide to
> post in the files section.
>
> Hmmmm. Just opened mine up. Looks like the
> original batteries. They
> must be almost 20 years old!!!! In addition to
> the switches, some
> resisters and capacitors, and a couple of
> diodes, there's a SONY 5F
> 11 - CXK5864P-15L chip and a TI 605BN -
> SN74HC00N chip. (At least
> that's what I think they are. My eyesight is
> not what it used to be.)
>
> --- In CZsynth@yahoogroups.com, "M.J.B."
> <yazzofever@y...> wrote:
> > On a side note,
> >
> > I've ran into something interesting. I've
> always
> > thought that the EZ-CZ aftermarket cartridges
> > that work in the CZ-3000,5000,1 are 64 voice
> > cartridges.
> >
> > But I've worked with one one time that I
> could
> > only pull up 32 voices. Was that cartridge
> > damaged, was I not using it right, or were
> they
> > sold like that?
> >
> > micah
> >
> > y[]a[]z[]z[]o[]f[]e[]v[]e[]r[]
>
>
>
>
y[]a[]z[]z[]o[]f[]e[]v[]e[]r[]
Discover Yahoo!
Get on-the-go sports scores, stock quotes, news and more. Check it out!
http://discover.yahoo.com/mobile.html