Yahoo Groups archive

Casio CZ/ VZ/ FZ - Pro Series

Index last updated: 2026-04-28 22:42 UTC

Thread

Re: FZ shareware collection

Re: FZ shareware collection

2013-10-07 by charlie midi gfa

i suspect by now the sounds have "warped and mutated "
eventually ending up into other libraries


thanks
but no target yet paul!!
still trying and missing




kid nepro has some for sale
but that sort of defeats being part of this group


check this out
any one have paypal and an extra &2.00 g.b.p to spare?
if you click them all it will still only ask for  2.00donation


http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg


charlie
Show quoted textHide quoted text
----- Original Message ----- 
From: "Paul Deco" <paul.deco@...>
To: "charles midi gfa pascal" <charles.copp@...>
Sent: Monday, October 07, 2013 4:00 PM
Subject: FZ shareware collection




Hi Charles,


http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/


Hope this helps, no FZ here.


Paul

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by Lee Borrell

Has anyone got any tips on transferring downloaded stuff from the net to the FZ? In particular which of those dumpers actually works - as I have tried to transfer stuff via MIDI with no success thanks to the peculiar way the handshaking works.
Or is there are way to get PCs to read the Casio formatted disks?





On Wednesday, 9 October 2013, 0:00, charlie midi gfa <charles.copp@...> wrote:
 
  
i suspect by now the sounds have "warped and mutated "
eventually ending up into other libraries

thanks
but no target yet paul!!
still trying and missing

kid nepro has some for sale
but that sort of defeats being part of this group

check this out
any one have paypal and an extra &2.00 g.b.p to spare?
if you click them all it will still only ask for  2.00donation

http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg

charlie
Show quoted textHide quoted text
----- Original Message ----- 
From: "Paul Deco" <paul.deco@...>
To: "charles midi gfa pascal" <charles.copp@...>
Sent: Monday, October 07, 2013 4:00 PM
Subject: FZ shareware collection

Hi Charles,

http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/

Hope this helps, no FZ here.

Paul

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by Carl Lofgren

The only way I do it - is by using the Lotharek floppy emulator. That
works very well.

/C

Lee Borrell wrote:
Show quoted textHide quoted text
>  
> 
> Has anyone got any tips on transferring downloaded stuff from the net to
> the FZ? In particular which of those dumpers actually works - as I have
> tried to transfer stuff via MIDI with no success thanks to the peculiar
> way the handshaking works.
> Or is there are way to get PCs to read the Casio formatted disks?
> 
> 
> 
> On Wednesday, 9 October 2013, 0:00, charlie midi gfa
> <charles.copp@...> wrote:
>  
> i suspect by now the sounds have "warped and mutated "
> eventually ending up into other libraries
> 
> thanks
> but no target yet paul!!
> still trying and missing
> 
> kid nepro has some for sale
> but that sort of defeats being part of this group
> 
> check this out
> any one have paypal and an extra &2.00 g.b.p to spare?
> if you click them all it will still only ask for 2.00donation
> 
> http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg
> 
> charlie
> 
> ----- Original Message -----
> From: "Paul Deco" <paul.deco@...>
> To: "charles midi gfa pascal" <charles.copp@...>
> Sent: Monday, October 07, 2013 4:00 PM
> Subject: FZ shareware collection
> 
> Hi Charles,
> 
> http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/
> 
> Hope this helps, no FZ here.
> 
> Paul
> 
> 
> 
>

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by Rainer Buchty

On Wed, 9 Oct 2013, Lee Borrell wrote:


> Or is there are way to get PCs to read the Casio formatted disks?


Yes. But you need to tweak the drive to rotate at 360rpm instead of 
300rpm.


Rainer

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by jammie

no pc cant read  the disk ut you can use a special card to read the format

the floppy emulator software allows fzf files to be used as images 

depends on what os you are using i have never had a problem with xp or win98 with the dumping programs

if you go to butchy net he has a good dumping program

the fz sharware collection should be 150+ disks as thats what i have unless not all are loaded

i also have the full eII library for the fz range as when  i went from EII to fz i converted them all with sounddesigner 2 back in the late 80,s
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: Lee Borrell 
  To: CZsynth@yahoogroups.com 
  Sent: Wednesday, October 09, 2013 9:51 AM
  Subject: Re: [CZsynth] Re: FZ shareware collection


    

  Has anyone got any tips on transferring downloaded stuff from the net to the FZ? In particular which of those dumpers actually works - as I have tried to transfer stuff via MIDI with no success thanks to the peculiar way the handshaking works.
  Or is there are way to get PCs to read the Casio formatted disks?






  On Wednesday, 9 October 2013, 0:00, charlie midi gfa <charles.copp@sympatico.ca> wrote:

    
  i suspect by now the sounds have "warped and mutated "
  eventually ending up into other libraries

  thanks
  but no target yet paul!!
  still trying and missing

  kid nepro has some for sale
  but that sort of defeats being part of this group

  check this out
  any one have paypal and an extra &2.00 g.b.p to spare?
  if you click them all it will still only ask for 2.00donation

  http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg

  charlie

  ----- Original Message ----- 
  From: "Paul Deco" <paul.deco@...>
  To: "charles midi gfa pascal" <charles.copp@...>
  Sent: Monday, October 07, 2013 4:00 PM
  Subject: FZ shareware collection

  Hi Charles,

  http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/

  Hope this helps, no FZ here.

  Paul 







  
  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2014.0.4142 / Virus Database: 3604/6733 - Release Date: 10/08/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by jammie

KryoFlux you can read fz floppy disks with this software as it controls the floppy drive which can switch to the faster speed of the 5.25" drives
but i just save all mine as fzf files
Show quoted textHide quoted text
----- Original Message -----
Sent: Wednesday, October 09, 2013 5:34 PM
Subject: Re: [CZsynth] Re: FZ shareware collection

On Wed, 9 Oct 2013, Lee Borrell wrote:

> Or is there are way to get PCs to read the Casio formatted disks?

Yes. But you need to tweak the drive to rotate at 360rpm instead of
300rpm.

Rainer

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4142 / Virus Database: 3604/6733 - Release Date: 10/08/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by charlie midi gfa

they all work    i use but am new at awave ,sample vision sound designer
turbo synth
file ex ftu  fz dump


they all function quite well and bear similarites to function from 
commonalities amongst fz's


you have some nice sounds to share lee?


charlie
Show quoted textHide quoted text
----- Original Message ----- 
From: "Lee Borrell" <templarser@...>
To: <CZsynth@yahoogroups.com>
Sent: Wednesday, October 09, 2013 4:51 AM
Subject: Re: [CZsynth] Re: FZ shareware collection




Has anyone got any tips on transferring downloaded stuff from the net to the 
FZ? In particular which of those dumpers actually works - as I have tried to 
transfer stuff via MIDI with no success thanks to the peculiar way the 
handshaking works.
Or is there are way to get PCs to read the Casio formatted disks?










On Wednesday, 9 October 2013, 0:00, charlie midi gfa 
<charles.copp@...> wrote:




i suspect by now the sounds have "warped and mutated "
eventually ending up into other libraries


thanks
but no target yet paul!!
still trying and missing


kid nepro has some for sale
but that sort of defeats being part of this group


check this out
any one have paypal and an extra &2.00 g.b.p to spare?
if you click them all it will still only ask for  2.00donation


http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg


charlie


----- Original Message ----- 
From: "Paul Deco" <paul.deco@...>
To: "charles midi gfa pascal" <charles.copp@...>
Sent: Monday, October 07, 2013 4:00 PM
Subject: FZ shareware collection


Hi Charles,


http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/


Hope this helps, no FZ here.


Paul

Re: [CZsynth] Re: FZ shareware collection

2013-10-09 by charlie midi gfa

is this because of the cyrstal Mhz clock ?
charlie


----- Original Message -----
Show quoted textHide quoted text
From: "Rainer Buchty" <rainer@...>
To: <CZsynth@yahoogroups.com>
Sent: Wednesday, October 09, 2013 12:34 PM
Subject: Re: [CZsynth] Re: FZ shareware collection




> On Wed, 9 Oct 2013, Lee Borrell wrote:
> 
> 
>> Or is there are way to get PCs to read the Casio formatted disks?
> 
> 
> Yes. But you need to tweak the drive to rotate at 360rpm instead of 
> 300rpm.
> 
> 
> Rainer
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
>

Re: [CZsynth] Re: FZ shareware collection

2013-10-10 by Lee Borrell

Every time I try one of the dumpers (tried 2 yesterday) I just get time out messages - the FZ is set to MIDI remote (do not know if there is another mode as it is fixed at REMOTE) and any attempt to send from FZ or from PC results in nothing but time outs - the other midi functions are fine - dumps to disk fine - I just cannot get any PC connection to work. I presume it needs both IN and OUT connecting - which I have done - but I get zilch.





On Wednesday, 9 October 2013, 21:55, jammie <jammie.emma@...> wrote:
 
  
 
no pc cant read  the disk ut you can use a 
special card to read the format
 
the floppy emulator software allows fzf files to be 
used as images 
 
depends on what os you are using i have never had a 
problem with xp or win98 with the dumping programs
 
if you go to butchy net he has a good dumping 
program
 
the fz sharware collection should be 150+ disks as 
thats what i have unless not all are loaded
 
i also have the full eII library for the fz range 
as when  i went from EII to fz i converted them all with sounddesigner 2 
back in the late 80,s
Show quoted textHide quoted text
----- Original Message ----- 
>From: Lee  Borrell 
>To: CZsynth@yahoogroups.com 
>Sent: Wednesday, October 09, 2013 9:51  AM
>Subject: Re: [CZsynth] Re: FZ shareware  collection
>
>  
>Has  anyone got any tips on transferring downloaded stuff from the net to the FZ?  In particular which of those dumpers actually works - as I have tried to  transfer stuff via MIDI with no success thanks to the peculiar way the  handshaking works.
>Or is there are way to get PCs to read the Casio 
  formatted disks?
>
>
>
>
>
>
>On Wednesday, 9 October 2013, 0:00,  charlie midi gfa <charles.copp@...> wrote:
>
>  
>i suspect by now the sounds have "warped and mutated "
>eventually ending up into other libraries
>
>thanks
>but no target yet paul!!
>still 
  trying and missing
>
>kid nepro has some for sale
>but that sort of defeats being part of this group
>
>check this out
>any one have paypal and an extra 
  &2.00 g.b.p to spare?
>if you click them all it will still 
  only ask for 2.00donation
>
>http://www.retrocomputing.org/cgi-bin/sitewise.pl?act=sect&s=552&id=retroorg
>
>charlie
>
>----- Original 
  Message ----- 
>From: "Paul Deco" <paul.deco@yahoo.com>
>To: "charles midi gfa pascal" <charles.copp@...>
>Sent: Monday, October 07, 2013 4:00 PM
>Subject: FZ 
  shareware collection
>
>Hi Charles,
>
>http://www.warningwillrobinson.com.au/Sound%20libraries/Casio/FZ/
>
>Hope this helps, no FZ here.
>
>Paul 
>
>
>
> 
>No virus found in this  message.
>Checked by AVG - www.avg.com
>Version: 2014.0.4142 / Virus 
  Database: 3604/6733 - Release Date: 10/08/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-11 by Daniel Forró

I don't think so. it's just one of older standards. See here:

http://www.retrotechnology.com/herbs_stuff/drive.html#rotate2

Daniel Forro
Show quoted textHide quoted text
On 10 Oct, 2013, at 6:53 AM, charlie midi gfa wrote:

> is this because of the cyrstal Mhz clock ?
> charlie
>
>
> ----- Original Message -----
> From: "Rainer Buchty" <rainer@...>
> To: <CZsynth@yahoogroups.com>
> Sent: Wednesday, October 09, 2013 12:34 PM
> Subject: Re: [CZsynth] Re: FZ shareware collection
>
>
>
>
>> On Wed, 9 Oct 2013, Lee Borrell wrote:
>>
>>
>>> Or is there are way to get PCs to read the Casio formatted disks?
>>
>>
>> Yes. But you need to tweak the drive to rotate at 360rpm instead of
>> 300rpm.
>>
>>
>> Rainer
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Re: [CZsynth] Re: FZ shareware collection

2013-10-11 by jammie

when casio was the first 16bit sampler and to provide 1.44mb drives every one else was still using 720k drives
until the akai did the s1000
the interface that casio used was the shugart but the old standard 5.25" drives spec so there drive was a special as it used the 360 speed drive
pc was always 300 as is most other drives
a lot of the older drives can be made to go to the 360 speed
but kroyflex make a raw image of the disk which has been interpreted by the hfc floppy emulator and works great
Show quoted textHide quoted text
----- Original Message -----
Sent: Friday, October 11, 2013 4:06 AM
Subject: Re: [CZsynth] Re: FZ shareware collection

I don't think so. it's just one of older standards. See here:

http://www.retrotechnology.com/herbs_stuff/drive.html#rotate2

Daniel Forro

On 10 Oct, 2013, at 6:53 AM, charlie midi gfa wrote:

> is this because of the cyrstal Mhz clock ?
> charlie
>
>
> ----- Original Message -----
> From: "Rainer Buchty" <rainer@...>
> To:
> Sent: Wednesday, October 09, 2013 12:34 PM
> Subject: Re: [CZsynth] Re: FZ shareware collection
>
>
>
>
>> On Wed, 9 Oct 2013, Lee Borrell wrote:
>>
>>
>>> Or is there are way to get PCs to read the Casio formatted disks?
>>
>>
>> Yes. But you need to tweak the drive to rotate at 360rpm instead of
>> 300rpm.
>>
>>
>> Rainer
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4142 / Virus Database: 3609/6736 - Release Date: 10/09/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-11 by charlie midi gfa

is it


 k roy flex


or is


kry o flex


i cant find a download link




charlie
Show quoted textHide quoted text
----- Original Message -----
From: "jammie" <jammie.emma@blueyonder.co.uk>
To: <CZsynth@yahoogroups.com>
Sent: Friday, October 11, 2013 5:22 PM
Subject: Re: [CZsynth] Re: FZ shareware collection




when casio was the first 16bit sampler and to provide 1.44mb drives every
one else was still using 720k drives


until the akai did  the s1000


the interface that casio used was the shugart but the old standard 5.25"
drives spec so there drive was a special as it used the 360 speed drive


pc was always 300 as is most other drives


a lot of the older drives can be made to go to the 360 speed


but kroyflex make a raw image of the disk which has been interpreted by the
hfc  floppy emulator and works great
  ----- Original Message -----
  From: Daniel Forró
  To: CZsynth@yahoogroups.com
  Sent: Friday, October 11, 2013 4:06 AM
  Subject: Re: [CZsynth] Re: FZ shareware collection






  I don't think so. it's just one of older standards. See here:


  http://www.retrotechnology.com/herbs_stuff/drive.html#rotate2


  Daniel Forro


  On 10 Oct, 2013, at 6:53 AM, charlie midi gfa wrote:


  > is this because of the cyrstal Mhz clock ?
  > charlie
  >
  >
  > ----- Original Message -----
  > From: "Rainer Buchty" <rainer@...>
  > To: <CZsynth@yahoogroups.com>

  > Sent: Wednesday, October 09, 2013 12:34 PM
  > Subject: Re: [CZsynth] Re: FZ shareware collection
  >
  >
  >
  >
  >> On Wed, 9 Oct 2013, Lee Borrell wrote:
  >>
  >>
  >>> Or is there are way to get PCs to read the Casio formatted disks?
  >>
  >>
  >> Yes. But you need to tweak the drive to rotate at 360rpm instead of
  >> 300rpm.
  >>
  >>
  >> Rainer
  >>
  >>
  >>
  >>
  >> ------------------------------------
  >>
  >> Yahoo! Groups Links
  >>
  >>
  >>
  >>
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >








  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2014.0.4142 / Virus Database: 3609/6736 - Release Date: 10/09/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-11 by Paul

I just had the HFC emulator installed on my linn 9000 after going through my third floppy drive failure. It works great but I sure am not planning on replacing all my drives and re engineering all my gear but I see the fz drives have their own extenuating circumstances. Maybe it's time to investigate other options.
  Paul T

Sent from my iPhone
Show quoted textHide quoted text
On Oct 11, 2013, at 2:22 PM, "jammie" <jammie.emma@...> wrote:

> 
> 
> when casio was the first 16bit sampler and to provide 1.44mb drives every one else was still using 720k drives
>  
> until the akai did  the s1000
>  
> the interface that casio used was the shugart but the old standard 5.25" drives spec so there drive was a special as it used the 360 speed drive
>  
> pc was always 300 as is most other drives
>  
> a lot of the older drives can be made to go to the 360 speed
>  
> but kroyflex make a raw image of the disk which has been interpreted by the hfc  floppy emulator and works great
> ----- Original Message -----
> From: Daniel Forró
> To: CZsynth@...m
> Sent: Friday, October 11, 2013 4:06 AM
> Subject: Re: [CZsynth] Re: FZ shareware collection
> 
> I don't think so. it's just one of older standards. See here:
> 
> http://www.retrotechnology.com/herbs_stuff/drive.html#rotate2
> 
> Daniel Forro
> 
> On 10 Oct, 2013, at 6:53 AM, charlie midi gfa wrote:
> 
> > is this because of the cyrstal Mhz clock ?
> > charlie
> >
> >
> > ----- Original Message -----
> > From: "Rainer Buchty" <rainer@buchty.net>
> > To: <CZsynth@yahoogroups.com>
> > Sent: Wednesday, October 09, 2013 12:34 PM
> > Subject: Re: [CZsynth] Re: FZ shareware collection
> >
> >
> >
> >
> >> On Wed, 9 Oct 2013, Lee Borrell wrote:
> >>
> >>
> >>> Or is there are way to get PCs to read the Casio formatted disks?
> >>
> >>
> >> Yes. But you need to tweak the drive to rotate at 360rpm instead of
> >> 300rpm.
> >>
> >>
> >> Rainer
> >>
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> 
> 
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4142 / Virus Database: 3609/6736 - Release Date: 10/09/13
> 
> 
> 
>

Re: [CZsynth] Re: FZ shareware collection

2013-10-12 by jammie

you cant down load it as its a piece of hard ware + software combo + floppy drive that they provide
----- Original Message -----
Show quoted textHide quoted text
Sent: Friday, October 11, 2013 11:08 PM
Subject: Re: [CZsynth] Re: FZ shareware collection

is it

k roy flex

or is

kry o flex

i cant find a download link

charlie

----- Original Message -----
From: "jammie" <jammie.emma@...>
To: <CZsynth@yahoogroups.com>
Sent: Friday, October 11, 2013 5:22 PM
Subject: Re: [CZsynth] Re: FZ shareware collection

when casio was the first 16bit sampler and to provide 1.44mb drives every
one else was still using 720k drives

until the akai did the s1000

the interface that casio used was the shugart but the old standard 5.25"
drives spec so there drive was a special as it used the 360 speed drive

pc was always 300 as is most other drives

a lot of the older drives can be made to go to the 360 speed

but kroyflex make a raw image of the disk which has been interpreted by the
hfc floppy emulator and works great
----- Original Message -----
From: Daniel Forró
To: CZsynth@yahoogroups.com
Sent: Friday, October 11, 2013 4:06 AM
Subject: Re: [CZsynth] Re: FZ shareware collection

I don't think so. it's just one of older standards. See here:

http://www.retrotechnology.com/herbs_stuff/drive.html#rotate2

Daniel Forro

On 10 Oct, 2013, at 6:53 AM, charlie midi gfa wrote:

> is this because of the cyrstal Mhz clock ?
> charlie
>
>
> ----- Original Message -----
> From: "Rainer Buchty"
> To:

> Sent: Wednesday, October 09, 2013 12:34 PM
> Subject: Re: [CZsynth] Re: FZ shareware collection
>
>
>
>
>> On Wed, 9 Oct 2013, Lee Borrell wrote:
>>
>>
>>> Or is there are way to get PCs to read the Casio formatted disks?
>>
>>
>> Yes. But you need to tweak the drive to rotate at 360rpm instead of
>> 300rpm.
>>
>>
>> Rainer
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4142 / Virus Database: 3609/6736 - Release Date: 10/09/13

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3614/6745 - Release Date: 10/12/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-12 by charlie midi gfa

too bad
back to the ole 16/32 bus atari
and my programming skills
this indicates


too bad
/|\atari charlie



----- Original Message -----
Show quoted textHide quoted text
From: "jammie"
To:
Sent: Saturday, October 12, 2013 6:28 PM
Subject: Re: [CZsynth] Re: FZ shareware collection


you cant down load it as its a piece of hard ware + software combo + floppy
drive that they provide
----- Original Message -----
From: charlie midi gfa
To: CZsynth@yahoogroups.com
Sent: Friday, October 11, 2013 11:08 PM
Subject: Re: [CZsynth] Re: FZ shareware collection



is it

k roy flex

or is

kry o flex

i cant find a download link

charlie

Re: [CZsynth] Re: FZ shareware collection

2013-10-16 by Lee Borrell

Peeps,

I have been trying the various FZ dumpers - and the only success I have had is FZdump95 running on Win95- this dumps from the FZ but will not load back again.
I have attached a couple of files generated from the "preset wave" function - I cannot tell if they are intact and work - so if anyone has time or the inclination- can someone try them in an FZ to see if they dumped properly?
I am unclear as to why this process is so problematical - if it dumps out to the PC then why not in reverse when both cables are in. The status is on (Remote)[is it ever anything else?] - the only other message I have had is 'executed ok' when the attached dumps worked.
I cannot imagine the FZ is flaky as everything else works fine - is there an actual dumper that works smoothly with modern OS?





On Sunday, 13 October 2013, 4:15, charlie midi gfa <charles.copp@...> wrote:
 
  
too bad
back to the ole 16/32 bus  atari
and my programming skills
this indicates


too bad
/|\atari   charlie
Show quoted textHide quoted text
----- Original Message ----- 
From: "jammie" 
To: 
Sent: Saturday, October 12, 2013 6:28 PM
Subject: Re: [CZsynth] Re: FZ shareware collection


you cant down load it as its a piece of hard ware + software combo + floppy 
drive that they provide
----- Original Message ----- 
From: charlie midi gfa
To: CZsynth@yahoogroups.com
Sent: Friday, October 11, 2013 11:08 PM
Subject: Re: [CZsynth] Re: FZ shareware collection



is it

k roy flex

or is

kry o flex

i cant find a download link

charlie




[Non-text portions of this message have been removed]

Re: [CZsynth] Re: FZ shareware collection

2013-10-16 by jammie

what midi device are you using
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: Lee Borrell 
  To: CZsynth@yahoogroups.com 
  Sent: Wednesday, October 16, 2013 6:17 PM
  Subject: Re: [CZsynth] Re: FZ shareware collection


    
  Peeps,

  I have been trying the various FZ dumpers - and the only success I have had is FZdump95 running on Win95- this dumps from the FZ but will not load back again.
  I have attached a couple of files generated from the "preset wave" function - I cannot tell if they are intact and work - so if anyone has time or the inclination- can someone try them in an FZ to see if they dumped properly?
  I am unclear as to why this process is so problematical - if it dumps out to the PC then why not in reverse when both cables are in. The status is on (Remote)[is it ever anything else?] - the only other message I have had is 'executed ok' when the attached dumps worked.
  I cannot imagine the FZ is flaky as everything else works fine - is there an actual dumper that works smoothly with modern OS?

  On Sunday, 13 October 2013, 4:15, charlie midi gfa <charles.copp@...> wrote:

    
  too bad
  back to the ole 16/32 bus atari
  and my programming skills
  this indicates

  too bad
  /|\atari charlie

  ----- Original Message ----- 
  From: "jammie" 
  To: 
  Sent: Saturday, October 12, 2013 6:28 PM
  Subject: Re: [CZsynth] Re: FZ shareware collection

  you cant down load it as its a piece of hard ware + software combo + floppy 
  drive that they provide
  ----- Original Message ----- 
  From: charlie midi gfa
  To: CZsynth@yahoogroups.com
  Sent: Friday, October 11, 2013 11:08 PM
  Subject: Re: [CZsynth] Re: FZ shareware collection

  is it

  k roy flex

  or is

  kry o flex

  i cant find a download link

  charlie

  [Non-text portions of this message have been removed]



  
  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2014.0.4158 / Virus Database: 3614/6752 - Release Date: 10/15/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-16 by charlie midi gfa

all these work on my o.s. lee!!

its a timely process if you have a large dump

 i found file_ex is good for voice dumps
 and ftu  works well for all others

 i use winxp as o.s.

caution!!!!  today's 1/2 hr test
1: fzdump

-sends
                           -full dump    to fz (slow) .fzf
                           -bank dump to fz (slow).fzb
                           -voice dump to fz as long as its been previousily
saved with fzdump (sometimes not   but have found bug!)


               -recieves all voice bank full

2:fz_ftu- alll format

3: file_ex-all format

4:  need to buy full version of awave studio


is this synth your centre of attention ,
if not please spend more time learning about the dump procedure

charlie
Show quoted textHide quoted text
----- Original Message ----- 
From: "Lee Borrell" <templarser@...>
To: <CZsynth@yahoogroups.com>
Sent: Wednesday, October 16, 2013 1:17 PM
Subject: Re: [CZsynth] Re: FZ shareware collection


Peeps,

I have been trying the various FZ dumpers - and the only success I have had 
is FZdump95 running on Win95- this dumps from the FZ but will not load back 
again.
I have attached a couple of files generated from the "preset wave" 
function - I cannot tell if they are intact and work - so if anyone has time 
or the inclination- can someone try them in an FZ to see if they dumped 
properly?
I am unclear as to why this process is so problematical - if it dumps out to 
the PC then why not in reverse when both cables are in. The status is on 
(Remote)[is it ever anything else?] - the only other message I have had is 
'executed ok' when the attached dumps worked.
I cannot imagine the FZ is flaky as everything else works fine - is there an 
actual dumper that works smoothly with modern OS?





On Sunday, 13 October 2013, 4:15, charlie midi gfa 
<charles.copp@...> wrote:


too bad
back to the ole 16/32 bus  atari
and my programming skills
this indicates


too bad
/|\atari   charlie



----- Original Message ----- 
From: "jammie"
To:
Sent: Saturday, October 12, 2013 6:28 PM
Subject: Re: [CZsynth] Re: FZ shareware collection


you cant down load it as its a piece of hard ware + software combo + floppy
drive that they provide
----- Original Message ----- 
From: charlie midi gfa
To: CZsynth@yahoogroups.com
Sent: Friday, October 11, 2013 11:08 PM
Subject: Re: [CZsynth] Re: FZ shareware collection



is it

k roy flex

or is

kry o flex

i cant find a download link

charlie




[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

Re: [CZsynth] Re: FZ shareware collection

2013-10-17 by Lee Borrell

Unfortunately not - all my sounds are on disk - which is why I am trying to get a sampler to connect to a PC. The two I managed were the default sounds.Odds on the same system might work for other sounds- but I had to use WIN95 to even get that to work.
I don't seem to have much luck with PC connections to samplers. I opened up the S10 last night and found the elastic band had perished on the Qdisk (again...along with the PR100 one!) so I tried the SYSx dump - which worked to the PC but not back again.
Apart from the problems due to XP - I cannot figure out what is going wrong.





On Wednesday, 16 October 2013, 23:41, jammie <jammie.emma@...> wrote:
 
  
 
what midi device are you using
Show quoted textHide quoted text
----- Original Message ----- 
>From: Lee  Borrell 
>To: CZsynth@yahoogroups.com 
>Sent: Wednesday, October 16, 2013 6:17  PM
>Subject: Re: [CZsynth] Re: FZ shareware  collection
>
>  
>Peeps,
>
>I have been trying the various FZ dumpers - and the only 
  success I have had is FZdump95 running on Win95- this dumps from the FZ but 
  will not load back again.
>I have attached a couple of files generated from 
  the "preset wave" function - I cannot tell if they are intact and work - so if 
  anyone has time or the inclination- can someone try them in an FZ to see if 
  they dumped properly?
>I am unclear as to why this process is so 
  problematical - if it dumps out to the PC then why not in reverse when both 
  cables are in. The status is on (Remote)[is it ever anything else?] - the only 
  other message I have had is 'executed ok' when the attached dumps worked.
>I 
  cannot imagine the FZ is flaky as everything else works fine - is there an 
  actual dumper that works smoothly with modern OS?
>
>On Sunday, 13 October 
  2013, 4:15, charlie midi gfa <charles.copp@...> 
  wrote:
>
>  
>too bad
>back to the ole 16/32 bus atari
>and my 
  programming skills
>this indicates
>
>too bad
>/|\atari 
  charlie
>
>----- Original Message ----- 
>From: "jammie" 
>To: 
>Sent: Saturday, October 12, 2013 6:28 PM
>Subject: Re: [CZsynth] Re: FZ 
  shareware collection
>
>you cant down load it as its a piece of hard ware 
  + software combo + floppy 
>drive that they provide
>----- Original 
  Message ----- 
>From: charlie midi gfa
>To: 
  CZsynth@yahoogroups.com
>Sent: Friday, October 11, 2013 11:08 PM
>Subject: 
  Re: [CZsynth] Re: FZ shareware collection
>
>is it
>
>k roy 
  flex
>
>or is
>
>kry o flex
>
>i cant find a download 
  link
>
>charlie
>
>[Non-text portions of this message have been 
  removed]
>
> 
>No virus found in this  message.
>Checked by AVG - www.avg.com
>Version: 2014.0.4158 / Virus 
  Database: 3614/6752 - Release Date: 10/15/13

Re: [CZsynth] Re: FZ shareware collection

2013-10-17 by charlie midi gfa

really hope the i.t.  shines thru for once in you
you have some samples or song files to trade ?

charlie
Show quoted textHide quoted text
----- Original Message -----
From: "Lee Borrell" <templarser@...>
To: <CZsynth@yahoogroups.com>
Sent: Thursday, October 17, 2013 10:27 AM
Subject: Re: [CZsynth] Re: FZ shareware collection


Unfortunately not - all my sounds are on disk - which is why I am trying to
get a sampler to connect to a PC. The two I managed were the default
sounds.Odds on the same system might work for other sounds- but I had to use
WIN95 to even get that to work.
I don't seem to have much luck with PC connections to samplers. I opened up
the S10 last night and found the elastic band had perished on the Qdisk
(again...along with the PR100 one!) so I tried the SYSx dump - which worked
to the PC but not back again.
Apart from the problems due to XP - I cannot figure out what is going wrong.





On Wednesday, 16 October 2013, 23:41, jammie <jammie.emma@...>
wrote:



what midi device are you using
----- Original Message -----
>From: Lee  Borrell
>To: CZsynth@yahoogroups.com
>Sent: Wednesday, October 16, 2013 6:17  PM
>Subject: Re: [CZsynth] Re: FZ shareware  collection
>
>
>Peeps,
>
>I have been trying the various FZ dumpers - and the only
  success I have had is FZdump95 running on Win95- this dumps from the FZ
but
  will not load back again.
>I have attached a couple of files generated from
  the "preset wave" function - I cannot tell if they are intact and work -
so if
  anyone has time or the inclination- can someone try them in an FZ to see
if
  they dumped properly?
>I am unclear as to why this process is so
  problematical - if it dumps out to the PC then why not in reverse when
both
  cables are in. The status is on (Remote)[is it ever anything else?] - the
only
  other message I have had is 'executed ok' when the attached dumps worked.
>I
  cannot imagine the FZ is flaky as everything else works fine - is there an
  actual dumper that works smoothly with modern OS?
>
>On Sunday, 13 October
  2013, 4:15, charlie midi gfa <charles.copp@sympatico.ca>
  wrote:
>
>
>too bad
>back to the ole 16/32 bus atari
>and my
  programming skills
>this indicates
>
>too bad
>/|\atari
  charlie
>
>----- Original Message -----
>From: "jammie"
>To:
>Sent: Saturday, October 12, 2013 6:28 PM
>Subject: Re: [CZsynth] Re: FZ
  shareware collection
>
>you cant down load it as its a piece of hard ware
  + software combo + floppy
>drive that they provide
>----- Original
  Message -----
>From: charlie midi gfa
>To:
  CZsynth@yahoogroups.com
>Sent: Friday, October 11, 2013 11:08 PM
>Subject:
  Re: [CZsynth] Re: FZ shareware collection
>
>is it
>
>k roy
  flex
>
>or is
>
>kry o flex
>
>i cant find a download
  link
>
>charlie
>
>[Non-text portions of this message have been
  removed]
>
>
>No virus found in this  message.
>Checked by AVG - www.avg.com
>Version: 2014.0.4158 / Virus
  Database: 3614/6752 - Release Date: 10/15/13

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.