Yamaha DTXpress/DTXplorer/DTXtreme

Yup, operating out of chammel 10.  There is an option
for Patch Map Setup, and there are quite a few options
for Yamaha, but none that lists DTX or anything close
to that.  I think most are for drum machines.  As it
stands it defaults to General MIDI Drums.  Could this
be the culprit?

Brett



--- liberatusvirus <liberatusvirus@...> wrote:
> Although it's entirely possible that your problem
> with snare and 
> kick is different from the traditional one, such a
> coincidence  
> would seem to indicate a connection. What midi notes
> does the 
> Digital Orchestrator assign to snare and kick? Those
> are the ones 
> you want to match. Are you operating on Channel 10
> out of the DTX?
> 
> --- In DTXpress@yahoogroups.com, Brett
> <baaron_123@y...> wrote:
> > I cross-checked the settings for the ones that
> > actually produce the snare and bass sounds with
> the
> > ones that do not, and I personally was not able to
> see
> > a difference between them.  This is really
> confusing
> > me.  Unfortunately, I don't know enough about MIDI
> > note numbers and channels and such to really be
> able
> > to come to a solution to this.  
> > 
> > Back to task, I guess.  Thanks for the impute Ed,
> I
> > appreciate it.  Anyone else with ideas?
> > 
> > Brett
> > 
> > 
> > --- liberatusvirus <liberatusvirus@y...> wrote:
> > > Brett,
> > > 
> > > I'm not sure that I have a handle on everything
> > > here, but the DTXPU 
> > > used to pre-assign nonstandard midi note numbers
> for
> > > snare and bass, 
> > > wreaking havoc with people who wanted to hear
> them
> > > through other 
> > > midi devices or programs; snare and kick were
> liable
> > > to come out as 
> > > anything, depending on what the numbers
> represented
> > > elsewhere. In 
> > > earlier versions, if you adjusted the snare and
> kick
> > > notes to what 
> > > your software (Cubase, for example) expected,
> then
> > > everything worked 
> > > out fine. I don't know enough about the DTXPIIU
> to
> > > say exactly 
> > > what's happening. In your case, if the note
> numbers
> > > for the default 
> > > kits appear to work okay (at least sometimes),
> you
> > > might check to 
> > > see whether they vary in the user ones.
> > > 
> > > Ed
> > > 
> > > --- In DTXpress@yahoogroups.com, "Brett"
> > > <baaron_123@y...> wrote:
> > > > Greetings, all.  Hope is everyone is well, and
> > > family is safe if 
> > > > overseas.  I've been gone for awhile, but I am
> > > back with a 
> > > question 
> > > > that is kind of stupifying me.  I have the pc
> > > software Digital 
> > > > Orchestrator (not the best, I admit) and I'm
> > > running my DTXpress 2 
> > > > into it to record my own tracks and mix it up.
> 
> > > I've encountered a 
> > > > problem that I can't understand.  I am
> receiving
> > > sound into my pc 
> > > > from my module, and it is recording it like
> its'
> > > supposed to, all 
> > > > except for the snare and the bass drum.  All
> > > cymbals and toms are 
> > > ok, 
> > > > but that's it.  Here's the kicker, and it may
> > > shead some clues to 
> > > the 
> > > > problem.  The snare and bass can be heard if I
> use
> > > a pre-defined 
> > > kit 
> > > > in the module, but not a user kit.  Any ideas?
> 
> > > I'm not sure 
> > > what's 
> > > > going on here.  Any help is, as always,
> > > appreciated.
> > > > 
> > > > Brett
> > > > 
> > > > p.s. - Happy B-Day Ratzo!
> > > 
> > > 
> > 
> > 
> > =====
> > 
> > Vote Quimby!
> 
> 


=====

Vote Quimby!