Digital BW, The Print

Jim;

I always use the acrylic block as well, but there seems to be a 
little wiggle room, side to side on a T009 cart that seems to cause 
mis-alignment just the same. At any rate, if I don't succesfully 
reset the chip first time on the T9 cart, I swap it over to the T8, 
and that always works. 
 UHU-stick  glue is a paste-type glue stick sold by the big office 
suply stores. Office Depot now has it under its own name. It is like 
paste wax in consistency, and easy to remove with a small blade when 
it's time to replace. Bets thing is you can just put a small blob 
under the chip, and you don't have to worry about glue leaking 
everywhere. Works great!

Steve 

www.stevekphoto.com

> 
> I do have a question for Steven though about the trick with the 
QB7 
> and the T008 cart... I never had that problem. I always was able 
to 
> reset both the T007 and T009 carts for 1280 no prob AFAIK without 
> having to hang at least the color cart T009's chip on a spare T008 
> cart first.
> 
> Of course, I used the little clear acriyllic rectangle supplied 
with 
> the QB7 resetter as a shim when resetting (only)the T009 color 
cart as 
> called out in instructions, otherwise the contacts don't line up. 
Is 
> this the problem with not being able to reset the chip on a T009 
cart- 
> you are not using the shim? Or does it truely not work for you, 
even 
> using the shim under the QB7?
> 
> Oh and can you tell me a little more about UHU-stick glue? Never 
heard 
> of it before...
> Jim H.
> 
>  
> > 
> > http://www.redsilver.com