Digital BW, The Print

Doug,

Thanks...that did it!!  I pulled the palletes apart (I had custom 
stacked them) and put them back together as small as they would go 
then tucked them into the upper right corner.  Then edged them out 
couple of pixels at a time.

Thanks again.
Cleavis


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Doug Fisher" 
<dougfisher@e...> wrote:
> I had the same problem until somebody helped me out.  My problem 
was that my toolbox on the left was over "one pixel too far" (trying 
to get as much real  estate out of my small monitor!!).  Try moving 
it one pixel to the right, then retry opening a file to see if the 
problem goes away.  If not, try> moving it one more.  This fixed my 
problem.  If it doesn't work by  moving> the toolbox, check your 
palettes next.> 
> Doug