Digital BW, The Print

Martin 

I've discovered this just now. Please see my recent post about my conerns about using the 
Single Sheet Guide and Manual-Roll.

Anyh feedback you can offer would be appreciated.

Also, it was my intent to use the following papers for nearly all of my projects:

Red River Aurora Art (8.5x11 - 13x19) and Epson Enhanced Matte (8.5x11 - 13x19).

Do you see a problem with sending any of the above papers through the regular paper 
loader (with the understanding that I will not be able to choose from Velvet paper)?

Thanks for your detailed response below.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "mxgo95747" <mxgo95747@...> 
> 
> I use a Mac:
> 
>   You shut the regular paper loader and then open the rear paper loader.  Also, I forgot 
to 
> mention that you have to set up the "page set up"  dialogue box as follows:
> 
> A;  Format:  Stlylus Photo 2400
> B.  Paper Size;  Using Super B (13 x 19) as an example;
>      select "Super B (13 x 19) >scroll down to Super B (13 x 19) manual - roll
>      {Note; it has to be set to manual - roll}
> 
> C.  on the Print Box;  check to make sure thar "Page Setup" shows "manual - roll"
> D.  Select VFA or any paper that was previously greyed out.
> 
> I think that is about it.  I went through the same problems;
> 
> When you insert the paper make sure that you push it down until it stops.  With me, the 
> VFA 13 x 19 paper works most of the time.  But some times, I have to keep shoving the 
> paper down several times for it to catch properly.  But do as Clayton Jones, suggests, 
put a 
> slight curl on the leading edge to help the paper along.
> 
> Martin
> 
> 
> 
> 
> 
> 
> There is a top front lid that folds down, but is this 
> 
> > > 
> > > 2)  Close the front paper loader>open the second from the front paper loader.
> > > 
> > > That has worked for me.
> > > 
> > > Martin
> > >
> >
>