Yahoo Groups archive
Messages
Page 114 of 564 · 28179 messages matched
2011-05-15 by Bakis Sirros
as the waveform outs of the A110 are AC coupled, they will not work for really low frequencies. (in few words you will not be able to use it as an LFO in low frequencies) but as for the HP cut-off frequency of the AC coupling, Dieter has to answer that.... Bakis Sirros - Parallel
2011-05-15 by Raul
this may be a newbie question. Just got a mini system and would like to use my additional audio outputs from the A110 as LFOs or possibly gates to trigger other modules. Would i need an attenuator module or is there an audio to CV module, or could i just plug the audio into a cv
2011-05-13 by john m
I believe it is possible with a-156, plus this module would be great with the a-155 too. --- In Doepfer_a100@yahoogroups.com, "aletropdj" wrote: > > Hi there. > > I recently buy a a-155 and i need to use like a arpeggiator. > The problem is: All key give the same tone > > My doep
2011-05-12 by Florian Anwander
Florian Anwander schrieb: > You could change the timing caps of the envelopes for su... Uuuups, sorry. I had the wrong sort order in my mailclient and overlooked that Dieter had answered already. Florian
2011-05-12 by Florian Anwander
sirolffoonav schrieb: > dear, i was reading on the A-143-1 Complex Envelope Generator, which sounds like an interesting module, but would there be a possibility to have this with way shorter (audio range) and longer (minute) a/d times? > > "The shortest attack/decay time is about
2011-05-12 by yahoo@doepfer.de
> dear, i was reading on the A-143-1 Complex Envelope Generator, > which sounds like an interesting module, but would there be a > possibility to have this with way shorter (audio range) and > longer (minute) a/d times? > > "The shortest attack/decay time is about 5 ms, the longe
2011-05-12 by sirolffoonav
dear, i was reading on the A-143-1 Complex Envelope Generator, which sounds like an interesting module, but would there be a possibility to have this with way shorter (audio range) and longer (minute) a/d times? "The shortest attack/decay time is about 5 ms, the longest attack/de
2011-05-11 by Matt
I'm selling a few Doepfer modules, all in excellent condition. A-108 LPF GBP 100 A-138a linear mixer GBP 30 A-179 Light to CV GBP 40 Plus shipping from London UK.
2011-05-11 by yahoo@doepfer.de
> Hi, > > I read that the spring loaded wheel can be modified with a jumper > to have a positive voltage range. > > How do I do this? > > Thanks, > > Rafael I have the required information to the A-100 DIY page on our website. Best wishes Dieter Doepfer
2011-05-10 by daad_noise
QMMG rev. 1 (#003) - $450 firm, was recently serviced by Tony himself. ModDemod rev. 2 (silver) - $100 obo Doepfer A-119 Ext. In - $80 obo Analogue Solutions MX61 Mixer / Inverter - $50 obo Buyer pays actual shipping from Canada, discounts for more than 1 item. I will ship anywhe
2011-05-09 by E.K.
Thanks for posting this here, Mark -- I'll be using a system with 90% Doepfer modules -- Ernst --- In Doepfer_a100@yahoogroups.com, "mcetilia" wrote: > > Hello all, > Just wanted to let you know about an upcoming concert > this Thursday, May 12 at 8:30pm EST. > > For those of you
2011-05-09 by lre
I have a couple of the original suitcases, and I cut a hole in the side of the box so that I could have the power coming out the side -- not sure why they decided to put the power in the back, for the reason that you mention. --- In Doepfer_a100@yahoogroups.com, achtung_999 wrote
2011-05-09 by mcetilia
Hello all, Just wanted to let you know about an upcoming concert this Thursday, May 12 at 8:30pm EST. For those of you in or around Providence, RI, be sure to come check it out If you can't make it, we'll be streaming the show live at: http://giss.tv/interface/?mp=ctrl-alt-repeat
2011-05-09 by miguel
found both! --- In Doepfer_a100@yahoogroups.com, "aletropdj" wrote: > > At ebay u have 3/4 a-140 to buy. > Im looking for a a-138 too:) >
2011-05-09 by bloodclaatkrabbz
Just in case anyone is going to discover my inquiry later, I am not looking for a A 126 anymore. I'll build a FS-1A from Juergen Haibles design :) best regards, Robert --- In Doepfer_a100@yahoogroups.com, "bloodclaatkrabbz" wrote: > > Hello everyone, > > I want to introduce mysel
2011-05-08 by achtung_999
Hi Jon, Those feet stem from the time that Doepfer fitted the power input in an 8hp panel on the front. I actually use an angled power cable for gigs. And I always use a roll of gaffer tape underneath the case (on the top) so it is a bit angled towards me. Much handier that actua
2011-05-08 by aletropdj
At ebay u have 3/4 a-140 to buy. Im looking for a a-138 too:)
2011-05-07 by codotinc
I know I'm not the only one who has this problem -- why bother having feet on the back of the A-100P6 if you can't plug it in when it's lying down? Has anyone found a power cable with a right angle of a low enough profile that they can plug in their case while it's lying down? I
2011-05-07 by cuari7
Lovely modules indeed, but I need to fund a custom project by *another* boutique company. These are practically new. Have seen very little use (7 hrs at the most). Want $300 for each, but buy both for only $500. USA only. Need to add s/h price. Paypal only. emailme at gretchenDOT
2011-05-07 by Bakis Sirros
[b]Doepfer A185-1 Bus Access module[/b], lower price 49% of new doepfer price, plus 8 euros shipping. [b]Doepfer A150 VC-Switch (older version)[/b], lower price 49% of new doepfer price, plus 8 euros shipping. if you buy both, you pay 8 euros shipping for BOTH modules combined! p
2011-05-07 by miguel
madrid spain
2011-05-07 by Bakis Sirros
hi list, FS: Doepfer A185-1 Bus Access module, price 57% of new doepfer price, plus 8 euros shipping. Doepfer A150 VC-Switch (older version), price 60% of new doepfer price, plus 8 euros shipping. Dynacord TAM-19 Flanger/Chorus, in fine working and cosmetic condition, 250 euros p
2011-05-07 by aletropdj
Hi nick. thanks for the elucidation. when i was looking for a arpeggiator patch with a a-155 i dont was thinking in that obvious complexity. i just trying to simulate a arpeggiator whit a programmable sequence of notes. But I learn a little more about that. Sorry too no that doep
2011-05-06 by achtung_999
Ok for the more experimentally oriented people here, here's a link to my live electronics project Ungrund. It's a duo I have with L'on Spek. I use a fair amount of Doepfer stuff, some max/msp and a Clavia micromodular. L'on uses Reaktor and Supercollider and a whole host of self
2011-05-06 by Denis Gökdag
Sorry for resurrecting this older thread ;-) Not *exactly* musical output, but pretty close.....my newest sample-/pattern-library for the NI Maschine (and soon for Battery/Kontakt and EXS-24) SSFX Transistor Rhythm was made using a lot of A-100 for synthesis and processing, autom
2011-05-05 by miguel
sold --- In Doepfer_a100@yahoogroups.com, "miguel" wrote: > > 100 eur, excluding shipping- excellent ahape > madrid spain >
2011-05-05 by david.salter@thomsonreuters.com
Oops. That should have read 143-1 in the opening sentence. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant Solutions Services EMEA North Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreu
2011-05-05 by david.salter@thomsonreuters.com
Watching the way the sequencer is jumping around the steps rather than going round sequentially can be done by clocking a A155 with a VC AD envelope like A149-1. An EG's that can cycle as an LFO, I use an A143-1 An EG A basic sequencer - I use either an Analogue Solutions SQ8 or
2011-05-05 by Igor Medeiros
i watched a very nice video from ezra buchla: http://www.youtube.com/watch?v=Y5NADtAQ53M i imagine that someone can archive a similar effect using an a152 and some more modules. maybe more 2 lfos controlling and changing steps, and some dividers for subdivisions. which modules sh
2011-05-05 by yahoo@doepfer.de
> yahoo@doepfer.de schrieb: > > Yes, reminds me indeed to my own beginnings ... > I just found recently the pcbs of the threefolded phaser. Unfortunately > I do not find anymore the pcb for the 120degrees LFO. > > For all others: http://tinyurl.com/3g4zk4p (babelfish version of t
2011-05-05 by Florian Anwander
yahoo@doepfer.de schrieb: > Yes, reminds me indeed to my own beginnings ... I just found recently the pcbs of the threefolded phaser. Unfortunately I do not find anymore the pcb for the 120degrees LFO. For all others: http://tinyurl.com/3g4zk4p (babelfish version of the Doepfer h
2011-05-05 by Florian Anwander
Hi Ton > Your Formant: you still play it? yes. > Doepfer: I already suspected that. Doepfer is one of the real diehards. :-))) Florian
2011-05-05 by yahoo@doepfer.de
> Hello Nino > > Decennia ago I started building the Elektor Formant. > > This alas never came to a good end. > > Sadder, but also wiser, I just made the first steps of building > a Doepfer A-100 system. > > > > I hope to learn and share a lot! > Welcome to the mail list! > The F
2011-05-05 by bogarts42
Thanks, Florian! I'm sure I'll be able to work with it. I just wanted to be certain that I wasn't missing anything. --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello > > > The sound is almost never an issue because it is so quiet, but I was just wondering if
2011-05-05 by Florian Anwander
Hello Nino > Decennia ago I started building the Elektor Formant. > This alas never came to a good end. > Sadder, but also wiser, I just made the first steps of building a Doepfer A-100 system. > > I hope to learn and share a lot! Welcome to the mail list! The Formant was my star
2011-05-05 by david.salter@thomsonreuters.com
Welcome Ton A lively group with some very clever people. David This email was sent to you by Thomson Reuters, the global news and information company. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be th
2011-05-05 by Ton Akveld
Hi Florian, Your Formant: you still play it? Doepfer: I already suspected that. Doepfer is one of the real diehards. Ton --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello Nino > > Decennia ago I started building the Elektor Formant. > > This alas never came t
2011-05-05 by zaum
Even though many arpeggiators sound monophonic, in the vintage days, true arpeggiation was, as far as I know, always achieved with a scanned polyphonic keyboard, such as the Jupiter 4, which I understand was the first to feature it. What comes out is sometimes monophonic but the
2011-05-05 by Ton Akveld
Hi David, Thanks! I hope some handy ones too, because constructing cases will be a struggle :-) Ton --- In Doepfer_a100@yahoogroups.com, david.salter@... wrote: > > Welcome Ton > > A lively group with some very clever people. > > David > > > This email was sent to you by Thomson
2011-05-05 by Nino Monello
Hi Group, Decennia ago I started building the Elektor Formant. This alas never came to a good end. Sadder, but also wiser, I just made the first steps of building a Doepfer A-100 system. I hope to learn and share a lot! Ton Akveld
2011-05-04 by dennis henderson
WTB/T ZEROSCILLATOR (EURORACK) [Non-text portions of this message have been removed]
2011-05-04 by Michael O.
Hi. I think you need to use an ADSR (A-140) to be able to change the gate time. Either control vcf or vca (or both). --- Den ons 2011-05-04 skrev aletropdj : Från: aletropdj Ämne: [Doepfer_a100] Re: arpeggiator with a-155 Till: Doepfer_a100@yahoogroups.com Datum: onsdag 4 maj 201
2011-05-04 by Florian Anwander
Hello > The sound is almost never an issue because it is so quiet, but I was just wondering if there was a step I was missing in the process of silencing the VCO. But it sounds like this is just the normal functioning of the synth so I'll work around it. Thanks again for your sug
2011-05-04 by aletropdj
Sorry, but a-155 can be a pseudo-arpeggiator. i try today and i was successful. :) I can send u the patch soon. I'm trying to understand the a155. the sound of sequence is continuous... ______ i need to be ------ carl --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: >
2011-05-03 by miguel
i m looking for... a155 sequencer a156 dual quantizer a138b exp.mixer thanks! from madrid spain with love
2011-05-03 by bogarts42
Hey Andy, Thanks for responding. I read the suggestion about the JP6 jumper and checked out the Dark Energy technical information PDF, and I'm afraid that is out of my expertise at this point (the DE is my first foray into anything modular/semi-modular). The sound is almost never
2011-05-03 by andy butler
Did you follow up the suggestions about the jumpers on the pcb? I can reproduce your problem on my DE, but it's very quiet compared to the normal functioning of the synth. I'd be tempted to put it down to cross talk in the circuitry, just a bit of the voltage from the oscillator
2011-05-03 by bogarts42
I am having a problem with my Dark Energy that is similar to a message that was posted several months earlier, although that message didn't seem to be resolved. My problem is that whenever I use my DE to process an external signal I am unable to completely disable the oscillator.
2011-05-03 by Florian Anwander
aletropdj schrieb: > Hi there. > > I recently buy a a-155 and i need to use like a arpeggiator. > The problem is: All key give the same tone > > My doepfer config is: > > 1x 110 > 1x 131 > 1x 140 > 1x 118 > 1x 180 > 1x 155 > 1x 145 > > Im using a roland sh-09 to control doepfer b
2011-05-03 by aletropdj
Hi there. I recently buy a a-155 and i need to use like a arpeggiator. The problem is: All key give the same tone My doepfer config is: 1x 110 1x 131 1x 140 1x 118 1x 180 1x 155 1x 145 Im using a roland sh-09 to control doepfer by cv/gate. Another question: the a-155 has a switch