Yahoo Groups archive
Messages
Page 112 of 564 · 28179 messages matched
2011-06-08 by Bakis Sirros
i am always open to suggestions from group members, or Dieter, to create new polls for forthcoming future A100 modules. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel
2011-06-08 by yahoo@doepfer.de
> Hello, > > What is up with the A135-2 module project? > I am using my synth over and over this days and realising AGAIN > how much I would need this module! > Is it abandonned? in development? > Does it interest anyone here? > > Best regards, > > Alexandre The A-135-2 project h
2011-06-08 by jakobsweb
Hi, I understand your request and personally I think one of the great attractions of the A-100 system is the wealth of modules available. In my opinion, the polls section should be redesigned. This group is dynamic. People learn about the sound design by using the modular system
2011-06-08 by alexandre_bellenger
I should precise, that to me, the first simple version seem to be very valuable. It offers things I can not do actually with my synth, like panning 4 audio channels to the stereo outputs...
2011-06-08 by alexandre_bellenger
Hello, What is up with the A135-2 module project? I am using my synth over and over this days and realising AGAIN how much I would need this module! Is it abandonned? in development? Does it interest anyone here? Best regards, Alexandre
2011-06-07 by Bakis Sirros
Memory Geist - 'Benthos' (DiNDDL09) DiNDDL09| Release date 04/07/11 "Benthos" is the second album by Memory Geist, the collaborative project of Steve Law (of Zen Paradox, Starseed Transmission & Black Cab) and Bakis Sirros (of Parallel Worlds & Interconnected). Their first album
2011-06-06 by York Luethje
Hi Andrew, It depends on what you want to do with your system. For instance, in a techno-based setup you could do without another MIDI controller as you already have two (very nice) sequencers. Some routes to explore: the DE only has one oscillator, another one (or two) will grea
2011-06-06 by kloppe_andrew
thanks to all your feedback, thus far. your comment is very helpful, York l.. As goes for the rest of you. Yes, i'm trotting down the path of electronic/techno. I agree, additional VCO definitely are something that should be part of the basic stable. That's one thing definitively
2011-06-06 by yahoo@doepfer.de
Please refer to the FAQ page of our website: www.doepfer.com > FAQ > Dark Energy > Dark Energy generates a permanent tone As alread said by Andy: if you want to "multiply" the ADSR by the velocity an additional external VCA is required. Best wishes Dieter Doepfer > -----Ursprüngl
2011-06-06 by brian walker
Hi Andrew Moog started out with a range of modules and then put the best of them into a little case equipping it with an attached keyboard Now you want to go the other way Study the architecture and base your modules on that You will mot have a Moog but you will have YOUR instrum
2011-06-06 by Ton Akveld
Hi Andrew, That sure makes sense to me ;-) I'm having the same 'problem' not being able to buy a pre-build system, so I decided to construct one myself, which in due case led me to Doepfer. As you can see here http://groups.yahoo.com/group/Doepfer_a100/photos/album/1838015066/pic
2011-06-06 by kloppe_andrew
Thanks ; yes i tried patch CV3 to VCF F. The problem i had was the permanent signal/tone and the end of the ADSR envelope. VElocity works, but again the volume just doesn't decay to the inaudible. I tried fiddling with the suggestion. > Set VCA source to ADSR, > turn up AM full.
2011-06-06 by kloppe_andrew
I know this is a loaded question, but hopefully somebody can give me some advice/thoughts. What is the best way to start out with a modular system? Upfront; I have a limited number of external gears, including Dark Energy, Flame Echometer, Doepfer MAQ 16/3 and some other external
2011-06-06 by zaum
> > Take a look at the Quantimator. http://www.toppobrillo.com/quantimator.html It > > can do chords and arpeggios. > > > Hi Does anyone have the A156 dual quantizer? > Can it makes arpeggios like juno 60 or better? The A156 does not have an arpeggiator, it's a only a pair of qua
2011-06-06 by yahoo@doepfer.de
> Hi all! > I know this must have been mentioned before.: > Can you please give me some information on the A190's Arpeggiator? > Does the A190 include that feature nowadays? > What kind of Arpeggiator is it (Something like the Juno 60 one)? > > I would appreciate any comment, > >
2011-06-06 by Ton Akveld
Hi all, I wonder if anyone else is experiencing hum problems like described in this thread: http://launch.groups.yahoo.com/group/Doepfer_a100/message/20598?threaded=1 I myself am constructing a A-100 system and recently reached the state were it can produce a sound, a MIDI2CV int
2011-06-06 by ricardo
Hi Does anyone have the A156 dual quantizer? Can it makes arpeggios like juno 60 or better? Thanks ric --- In Doepfer_a100@yahoogroups.com, "George P. Macklin" wrote: > > Hello Ric, > > Take a look at the Quantimator. http://www.toppobrillo.com/quantimator.html It > can do chords
2011-06-06 by ricardo
Hi George Thanks for the link , that module looks very interesting. What about the A100 190-1 arpeggiator? do you know if it will be upgraded to the 190-1 one day/ Thanks ric --- In Doepfer_a100@yahoogroups.com, "George P. Macklin" wrote: > > Hello Ric, > > Take a look at the Qua
2011-06-04 by George P. Macklin
Hello Ric, Take a look at the Quantimator. http://www.toppobrillo.com/quantimator.html It can do chords and arpeggios. Cheers, George On Sat, Jun 4, 2011 at 9:32 AM, ricardo wrote: > > > Hi all! > I know this must have been mentioned before.: > Can you please give me some informa
2011-06-04 by ricardo
Hi all! I know this must have been mentioned before.: Can you please give me some information on the A190's Arpeggiator? Does the A190 include that feature nowadays? What kind of Arpeggiator is it (Something like the Juno 60 one)? I would appreciate any comment, Any other Arpeggi
2011-06-04 by jakobsweb
Hi everyone, I was wondering if anyone is able to point out the sonic characteristics of the A-101-2 vs A-102 vs A-101-1. I have the A-102 and like it for its deep sub-bassy sound. I also have the A-101-1 Vactrol Filter which has yet to reveal its edge to me and seeems to go into
2011-05-31 by john m
FOR SALE: WMD Geiger Counter Euro rack module. Mint in box with insructions, hardly used! £190 + postage. All info and samples here: http://www.wmdevices.com/eurorackgeiger.php John.
2011-05-30 by andy butler
It's not possible without additional hardware. To combine the ADSR with velocity they need to be multiplied together, rather than added, and the DE simply doesn't have that feature available. So, you'd need another VCA. Don't know if you can get "good enough" by:- Set VCA source
2011-05-30 by kloppe_andrew
Not sure if what i am asking is possible. So.... What do i have to patch in order for my note-velocity to work together with my envelope? 1. I tried patching the output:envelope to the input:VCA A. however, in this case the velocity is not reflected. I tried patching the output:C
2011-05-30 by Vesa Vehvilainen
Yes, thanks for the info! I'll send it back for repair then. Vesa > > Hi y'all, > > > > I have an issue with my A-147 VC-LFO -- The manual promises a > > range of 0.01Hz - 50Hz. > > Using the manual frequency control, I get frequencies in audio > > range and beyond, from bass (10
2011-05-30 by yahoo@doepfer.de
> It kinda works, but now whenever a cable is plugged into the 1/4" > input it makes a "bad sound" like a buzzing/humming kind of thing. The > sound changes when I plug the other end into anything, or adjust the > gain on the 119. I tried swapping out the opamp cause I had some >
2011-05-30 by yahoo@doepfer.de
> Hi y'all, > > I have an issue with my A-147 VC-LFO -- The manual promises a > range of 0.01Hz - 50Hz. > Using the manual frequency control, I get frequencies in audio > range and beyond, from bass (100 Hz or so) to way above audio. No > sub-audio levels anywhere. > > Can I adju
2011-05-29 by Vesa Vehvilainen
Hi y'all, I have an issue with my A-147 VC-LFO -- The manual promises a range of 0.01Hz - 50Hz. Using the manual frequency control, I get frequencies in audio range and beyond, from bass (100 Hz or so) to way above audio. No sub-audio levels anywhere. Can I adjust the range somew
2011-05-29 by Tim
> Can I adjust the range somewhere? The 'OFFS' trimpot at the top edge of the PCB adjusts the overall range - maybe it has been knocked out of adjustment or something? If it is not working as you expect, you have little to lose by giving it a tweak! Tim
2011-05-29 by Giorgio Moroder
It kinda works, but now whenever a cable is plugged into the 1/4" input it makes a "bad sound" like a buzzing/humming kind of thing. The sound changes when I plug the other end into anything, or adjust the gain on the 119. I tried swapping out the opamp cause I had some spares, b
2011-05-29 by Florian Anwander
Hello john > Hey all, whats the longest a cv/gate cable can be without problems? > I have gear on opposite sides of studio now and need to buy cables to reach, want to be sure before I buy. Gate cables even longer than 10 meters usually are no problem. CV-Cables of this length ma
2011-05-29 by synovatron
Hi, What Florian says is spot on; from a theoretical point of view (for anyone interested) the key things are output and input impedance, cable capacitance and resistance. If you take a relatively standard low-cost coax cable of say 380pF/m and 128 Ohms/km this will not cause any
2011-05-28 by dingfutzer
FS: Flight - Sound of Shadows - rack tested - w/paperwork, screws, ribbon & Box. Excellent condition - $151 U.S. only - post & ins. additional check or M.O. preferred Thanks - Bill in PA [Non-text portions of this message have been removed]
2011-05-28 by Bakis Sirros
hi John, i use 2 meter cables without problems.... Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ parallelworldsmusic www. m
2011-05-28 by john m
Hey all, whats the longest a cv/gate cable can be without problems? I have gear on opposite sides of studio now and need to buy cables to reach, want to be sure before I buy. Cheer John.
2011-05-28 by alexandre_bellenger
Thanks for info, I will ask to Schneiders when they will get it. Best, A --- In Doepfer_a100@yahoogroups.com, "mfretton" wrote: > > > I have a Pittsburgh OUTS so it is already released & I think it's great. Schneiders will have it very soon otherwise you could order from Analogue
2011-05-27 by mfretton
I have a Pittsburgh OUTS so it is already released & I think it's great. Schneiders will have it very soon otherwise you could order from Analogue Haven. --- In Doepfer_a100@yahoogroups.com, "alexandre_bellenger" wrote: > > Hello, > > Thanks for yr replies. > > Indeed the Pittsbu
2011-05-27 by dmowczan@mac.com
I take the LFO square output with adjustable pulse width. I run that square output to a EG and run the an inverted version of that square to another EG. Both have no attack, sustain, or release and just a little bit of delay. This creates a railroad style pair of blinking lights,
2011-05-27 by alexandre_bellenger
Hello, Thanks for yr replies. Indeed the Pittsburgh really looks good, I prefer it to the Analog Solutions pretty much... Hope it will be released soon and available in Europe... Best, Alexandre --- In Doepfer_a100@yahoogroups.com, "mfretton" wrote: > > > Have a look at the new P
2011-05-26 by Denis Gökdag
You could use a step sequencer to control a trigger delay using one of the CV rows, and patch one of the trigger outs into the trigger delay. That should allow to adjust timing per step. Best, Denis / SSFX On May 25, 2011, at 7:33 PM, Raul wrote: > My belief is that modulating th
2011-05-26 by yahoo@doepfer.de
> Hi List > > Is it possible to mod the Doepfer A-183-2 to have a 10 volt offsett instead of 5 volt? > I wanna mod a set so i can use them to use them to control some Buchla 100 series vco's. > They need 8 or 9 volt to have an audiorange tuning and add a voltage to that offset. >
2011-05-25 by jakobsweb
you're welcome. they certainly are similar from a basic sound point of view. Maybe it's just me but I think the A-122 has a much softer 'bottom' when modulated, more punchy. I guess it depends on whatever sonic values you're looking for. It's splitting hairs to some and a philoso
2011-05-25 by nik
Thank you Jacob those demos helped a lot but i really don't listen any big differnce from 106-6 24db in comparison with 122...i also have 105 which is listenable different! But i also liked 102 ... it's very creamy...!!! --- In Doepfer_a100@yahoogroups.com, "jakobsweb" wrote: > >
2011-05-25 by Dennis Verschoor
Hi List Is it possible to mod the Doepfer A-183-2 to have a 10 volt offsett instead of 5 volt? I wanna mod a set so i can use them to use them to control some Buchla 100 series vco's. They need 8 or 9 volt to have an audiorange tuning and add a voltage to that offset. Cheers, Den
2011-05-25 by Igor Medeiros
and how could i do shuffle beats with an a152? thx in advance igor [Non-text portions of this message have been removed]
2011-05-25 by Raul
My belief is that modulating the clock rate will do the trick. I would modulate my voltage controlled lfo with a second lfo to get a shuffle feel. but there are other ways. Maybe even introducing delay to the clock signal?or voltage controlled delay of the clock signal? Maybe som
2011-05-25 by yahoo@doepfer.de
> Is the 100ma the right one? > I am in the US, is the value different? It depends upon the case type. For details please look at the FAQ page of our website: www.doepfer.com > FAQ > A-100 > values for A-100 fuses Here you find all the information you need. Best wishes Dieter Doe
2011-05-25 by Raul
thanks.thats the exact information I needed. regards. Raul --- In Doepfer_a100@yahoogroups.com, wrote: > > > Is the 100ma the right one? > > I am in the US, is the value different? > > It depends upon the case type. For details please look at the FAQ page of > our website: > > ww
2011-05-25 by Florian Anwander
Raul wrote: > Thanks. Got the model. Just need a vendor in the United States. Any ideas? Any supplier for electronics like audio or TV. I am in europe, but I'd say something like Radio Shack should have them. Florian
2011-05-25 by Raul
Is the 100ma the right one? I am in the US, is the value different? --- In Doepfer_a100@yahoogroups.com, "richyho@..." wrote: > > From an earlier thread on the same subject.... > > > --- In Doepfer_a100@yahoogroups.com, Richard Horsman wrote: > > > > This page: > > http://www.map