Yahoo Groups archive
Messages
Page 113 of 564 · 28179 messages matched
2011-05-25 by Florian Anwander
Hello Raul wrote: > I saw mention of fuses commonly going out after some time. I'd like to have some to avoid downtime. > Could anyone point out the exact model of fuse and a vendor in the us? Read the posting of richyho from 20:37. Florian
2011-05-25 by Raul
Thanks. Got the model. Just need a vendor in the United States. Any ideas? --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello > > Raul wrote: > > I saw mention of fuses commonly going out after some time. I'd like to have some to avoid downtime. > > Could anyo
2011-05-24 by Raul
I saw mention of fuses commonly going out after some time. I'd like to have some to avoid downtime. Could anyone point out the exact model of fuse and a vendor in the us?
2011-05-24 by York Luethje
Did you check the fuse? _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Alessandro Gesendet: Dienstag, 24. Mai 2011 14:12 An: Doepfer_a100@yahoogroups.com Betreff: [Doepfer_a100] A100 does not power on anymore... what should I check? H
2011-05-24 by Richard Horsman
It is probably the fuse inside the Doepfer case. Mine has blown many times - usually after adding a new module or two. It seems that the power supply gets used to delivering a certain amount of power and if that changes the fuse blows. Well, that's what it seems like to me anyway
2011-05-24 by dennis henderson
Hello, i need to get rid of this stuff fast & also have more that i will be putting up later. Will take BEST OFFERS(sorry about the new prices). Located in Kansas City, USA a124 wasp filter $110.00a111 highend vco $349.00a110 standard vco x2 $199.00/moda116 vc waveform processor
2011-05-24 by Alessandro
Thanks, Alessandro --- In Doepfer_a100@yahoogroups.com, "richyho@..." wrote: > > From an earlier thread on the same subject.... > > > --- In Doepfer_a100@yahoogroups.com, Richard Horsman wrote: > > > > This page: > > http://www.maplin.co.uk/Module.aspx?ModuleNo=452 > > > > GL55 1
2011-05-24 by richyho@btopenworld.com
From an earlier thread on the same subject.... --- In Doepfer_a100@yahoogroups.com, Richard Horsman wrote: > > This page: > http://www.maplin.co.uk/Module.aspx?ModuleNo=452 > > GL55 10 pack for £2.69 > --- In Doepfer_a100@yahoogroups.com, "Alessandro" wrote: > > Thanks, > which k
2011-05-24 by Alessandro
Thanks, which kind of fuse should I purchase, ans is it easy to find?... Thank you, Alessandro --- In Doepfer_a100@yahoogroups.com, Richard Horsman wrote: > > It is probably the fuse inside the Doepfer case. Mine has blown many times - usually after adding a new module or two. It
2011-05-24 by Alessandro
Hello, my A100 does not power up. I changed the power cord, socket, everything that keeps connected the A100 to the power supply but it is still dead. What should I check before sending it back :( Many thanks, Alessandro
2011-05-24 by Denis Gökdag
I quite like the spelling in the subject line: DOPE-fer ;-) Best, Denis / Surround SFX
2011-05-24 by jakobsweb
Hi, I personally think they have different sonic expressions - might be similar technically though. I took the time to record different Doepfer 4-pole filters you might be interested in checking out: http://soundcloud.com/jakobsweb/doepfer-a106-6-a122-a105 and http://soundcloud.c
2011-05-24 by yahoo@doepfer.de
> i also have the 106-6 xpander clone...which is my favorite filter....! > do you know if the LP 24DB slope it's similar to the 122?? Yes, the 24dB lowpass of the A-106-6 is quite the same as the A-122. Best wishes Dieter Doepfer
2011-05-23 by nik
i also have the 106-6 xpander clone...which is my favorite filter....! do you know if the LP 24DB slope it's similar to the 122?? --- In Doepfer_a100@yahoogroups.com, "jakobsweb" wrote: > > Hi, > I totally agree with you on the sound of CEMs. > Personally I think the DE filter an
2011-05-23 by yahoo@doepfer.de
Today some self-promotion :-) From my point of view an absolutely worth seeing and worth listening video by GusGus at the opening ceremony of the Reykjavik Concert Hall "Harpa": http://www.youtube.com/watch?v=M80TrgxCS4M Best wishes Dieter Doepfer
2011-05-23 by Talus IV
Hi! Take a look at the Analogue Solutions HP-01. Regards.
2011-05-23 by Talus IV
Hi! Take a look at the Analogue Solutions HP-01. Regards. --- El lun, 23/5/11, alexandre_bellenger escribió: De: alexandre_bellenger Asunto: [Doepfer_a100] Headphone module Para: Doepfer_a100@yahoogroups.com Fecha: lunes, 23 de mayo, 2011 08:54 Hello, It has been very very long s
2011-05-23 by mfretton
Have a look at the new Pittsburgh Modular OUTS - it's the perfect output/headphone module and is only 6HP --- In Doepfer_a100@yahoogroups.com, "alexandre_bellenger" wrote: > > Hello, > > It has been very very long since I didnt post a message here. Glad to see the list is active.
2011-05-23 by alexandre_bellenger
Hello, It has been very very long since I didnt post a message here. Glad to see the list is active. I am looking for an headphone module. Since the Doepfer one is not available anymore I am wondering if anyone here have a suggestion, any brand which proposes such a module. I've
2011-05-22 by Richard Horsman
Thanks for your comments Alan - Always nice to get a bit of positive feedback :-) I've got a couple of files on Soundcloud: http://soundcloud.com/richard-horsman ...and bandcamp: http://richardhorsman.bandcamp.com/ Nothing particularly special, and from a while back, but feel fre
2011-05-22 by Bakis Sirros
Exit Strategy by Ian Boddy & Parallel Worlds (DiN37) (official release date is 31st of May) is now available from the DiN web store. http://www.din.org.uk/din/node/385 (for the gear-heads: the album is full of analogue modular synths...) Bakis Sirros - Parallel Worlds / Interconn
2011-05-22 by Raul
Is there and additional module I can use to mix the gates from this module and route them better. I feel as though I am not utilizing the gates most efficiently. I am using them to trigger reset on LFOs, and filters for percussive sounds, but I know there's more to do.
2011-05-22 by Alan
Thanks very much for this Richard, I'll definitely have a stab at making one. Your rig looks mighty impressive and the way you've designed the sequencer fits in with it is very neat. I prefer this as it doesn't unnecessarily hog any rack space. I had a good look around your blog
2011-05-21 by Richard Horsman
Oh, and there's a picture of it in use by David from PostModular here (you can see the 9V battery dangling down the back!!): http://1.bp.blogspot.com/_eXfUkcozUik/S9QbyeydmaI/AAAAAAAAAcA/oPSawekj34o/s1600/P1040016.JPG On 21 May 2011, at 14:39, Alan wrote: > Hi Group, > > I was lo
2011-05-21 by Richard Horsman
Hi Alan I built one of these (with a bit of extra direction from MirlitronOne - the guy in the video). I redesigned the enclosure to fit in with my gear. It works great with my modular. I was planning on powering it from the bus, but never got round to it. Should be fine I guess.
2011-05-21 by Alan
Hi Group, I was looking at this idea for making a basic CV sequencer using a cheap Velleman MK107 LED kit ( http://www.synthtopia.com/content/2009/11/10/make-a-music-sequencer-from\ -a-6-led-kit/ ) and wondered whether this would work with a Doepfer system. Has anyone here tried
2011-05-20 by jakobsweb
Hi, I totally agree with you on the sound of CEMs. Personally I think the DE filter and a A-122 are quite different from another. The A-122 is one of my favourite 4-pole LPs (I have almost all Doepfer filter modules) as is the A-105. The A-122 has a lovely 'wet' and rather softis
2011-05-20 by nik
I really like theLow pass filter sound of the Curtis chips and especially Cem 3320 that is inside many analogues from the past like SCI Pro One..! I am thinking to buy the A-122 which has the curtis chip Cem 3379 which as i know is very similar to Cem 3320 But i already have the
2011-05-19 by Raul
This question is specific to patching modules together. Two different size racks are being used, side by side. Has anyone attempted this? Are a separate set of 1/8" to 1/4" mono cables enough to transmit signals (gates,cv's) back and forth) or would some attenutation have to occu
2011-05-19 by yahoo@doepfer.de
> I thought i ask the experts. > > I have a Dark Energy (Bought in Germany, shipped to the US). > > The specs say it is rated for; (12...15V AC, min. 400mA) > > Now i have an extra AC adapter, rated at 16v, 1000ma). > > Is it advisable not to use this adapter. I'm not worried abo
2011-05-19 by kloppe_andrew
Thank you, that's what i thought - that is your comment on heat. I'll take your advice. one a side note: with Dark Energy you might indeed have found the matter that science only keeps speculating about. :c) What an amazing piece of 'quantum physics'. kudos! --- In Doepfer_a100@y
2011-05-19 by Florian Anwander
Hello Andrew > Is it advisable not to use this adapter. I'm not worried about the 1000ma. But i am hesitant about the extra 1volt above the specs (note: device came with a 12v, 550ma.) I recommend to wait for an answer from Dieter Doepfer before you use this adapter. Florian
2011-05-18 by jakobsweb
oh, my A-100 and Cwejman are interconnected a lot - as is my Analogue Solutions Telemark and Moog Voyager with modular extensions- they all profit greatly from the versatility of Doepfer's manifold modules. --- In Doepfer_a100@yahoogroups.com, "mirror_saw7778" wrote: > > Well if
2011-05-18 by mirror_saw7778
Well if you want the CEM sound then clearly only a CEM based filter will do. I also have a S1mk2 and love its 2/4/6 pole high pass filter. It is voltage compatible with the Doepfer/Eurorack standard - don't keep them apart! I tend to think of the S1mk2 as a giant Euro module inst
2011-05-18 by kloppe_andrew
I thought i ask the experts. I have a Dark Energy (Bought in Germany, shipped to the US). The specs say it is rated for; (12...15V AC, min. 400mA) Now i have an extra AC adapter, rated at 16v, 1000ma). Is it advisable not to use this adapter. I'm not worried about the 1000ma. But
2011-05-18 by jakobsweb
Thank you for these examples. The Division 6 filter looks interesting but will have a very different sonic character with SSM2040 vs. CEM3320 in A-123 (I have A-105 and A-122 LPs for comparison). I have the Cwejman S1 MK2 including the MMF - not sure I want to add it to my Doepfe
2011-05-18 by mirror_saw7778
You could use a shuffled clock source generated by a computer or drum machine that outputs triggers. I use samples of triggers in Ableton Simpler or a Machinedrum which has a trigger generator built in. Both can easily shuffle a beat. Then patch that into the input of the A160. T
2011-05-18 by mirror_saw7778
The following currently available Eurorack filters have a 4 pole high pass mode. Cwejman MMF-1 http://cwejman.net/mmf-1.htm Division 6 Filtare http://www.division-6.com/products/filtare-seiii-eurorack.php there are probably more since there are now at least 42 Eurorack manufactur
2011-05-18 by Florian Anwander
Raul wrote: > Sorry, but was it no it would not shuffle? > > or no to there being an easier way? no, there is no easier way. The more complicated way would be: Use any LFO with saw, feed the saw through a A-165 comparator. This produces a pulse wave with adjustable pulse width. P
2011-05-18 by david
I'm selling in good condition: A-115 30 EUR A-118 35 EUR A-119 35 EUR A-148 30 EUR plus shipping from Budapest. or swap for A-131 A-138b A-151
2011-05-18 by Matt
A-111-1 High-End VCO - GBP 170 A-138b mixer with LME49740 replacing the original chip for better audio quality - GBP 30 Both bought new from Thomann in January Plus shipping from London UK
2011-05-17 by Raul
Sorry, but was it no it would not shuffle? or no to there being an easier way? --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi Raul > > > If I have a clock divider a 160 and feed it an LFO from the vc LFO > > And modulate the rate will I get shuffled beats or
2011-05-17 by Florian Anwander
Hi Raul > If I have a clock divider a 160 and feed it an LFO from the vc LFO > And modulate the rate will I get shuffled beats or is there an easier way? Unfortunately no. Florian
2011-05-17 by Raul
If I have a clock divider a 160 and feed it an LFO from the vc LFO And modulate the rate will I get shuffled beats or is there an easier way?
2011-05-17 by Raul
I just saw the a 143-4 Quad vc LFO/Vco. Thus looks very interesting. --- In Doepfer_a100@yahoogroups.com, "Raul" wrote: > > I guess my main use would be to use the vco to either apply vibrato via the cv in of the freq control of an adjacent module, plug in to the clock divider to
2011-05-17 by achtung_999
I totally agree, the A123 is an indispensable tool in my eurorack system. A lot of my patches make use of this filter. Very often in tandem with an A122 and an A172.. Go figure that one out ;-) On Tue, May 17, 2011 at 11:58 AM, jakobsweb wrote: > > > Hi everyone, > I've been look
2011-05-17 by jakobsweb
ahh, that's one of the patch examples on Doepfer's A-172 page - the one without audio example. If you could share an audio example of that? Thanks for replying to my post. --- In Doepfer_a100@yahoogroups.com, achtung_999 wrote: > > I totally agree, the A123 is an indispensable to
2011-05-17 by jakobsweb
Hi everyone, I've been looking for a 4-pole highpass filter like the A-123 which is not being produced anymore - very unfortunately. On top I found out that no manufacturer of eurorack modules seems to offer them. Very odd!!! I emailed Dieter Doepfer who shares my view on the son
2011-05-16 by Raul
I guess my main use would be to use the vco to either apply vibrato via the cv in of the freq control of an adjacent module, plug in to the clock divider to still create subdivisions of the waveform, and/ or plug in to the cv in of a vca for tremolo, vc envelope,etc. --- In Doepf
2011-05-15 by Denis Gökdag
In an analog modular system, there is no fundamental difference between audio and CV like in for example Reaktor or Kyma. So go ahead and plug any out to any in :-) Best, Denis > is there an audio to CV module, or could i just plug the audio into a cv in? > [Non-text portions of