Yahoo Groups archive
Messages
Page 162 of 564 · 28179 messages matched
2009-12-29 by Mark Pulver
Pricing and other info is here: http://midiwall.com/forsale/ Analogue Systems RS40: Noise generator Doepfer A-101-1: Steiner Vactrol VCF A-101-3: Vactrol Phaser A-104: Trautonium Formant Filter A-120: 24db VCF A-127: VC Triple Resonance Filter A-136: Distortion / Waveshaper A-138
2009-12-29 by charles kerr
Hi Stuadh, Hoping they've not gone yet! but I'm interested in the A-156 and A-192, let me know if they're still available, Thanks, Charlie --- On Tue, 29/12/09, Stuadh wrote: From: Stuadh Subject: [Doepfer_a100] FS: 3 x Doepfer Modules. To: Doepfer_a100@yahoogroups.com Date: Tues
2009-12-29 by miguel
back to search again, also the Hihat cymbal module thx miguel --- In Doepfer_a100@yahoogroups.com, "miguel" wrote: > > > stop searching, thanks > --- In Doepfer_a100@yahoogroups.com, "miguel" wrote: > > > > from spain with love > > > > miguel > > >
2009-12-29 by Florian Anwander
Hello Dan, another idea came to my mind: you can modify the characteristics of a potentiometer by adding on one side of the potentiometer a paralleled fixed resistor. There is a nice small application by christoffer list, which explains this nicely http://www.mindspring.com/~clis
2009-12-29 by Stuadh
Hi all, I need to clear some space of under-used modules. Therefore, before I put them on eBay, I would like to offer these to the forum, all with screws and power cables and in good working order: A 156 Quantizer - Fairly new and in excellent condition. £80 A 171 VC Slew Limiter
2009-12-29 by miguel
stop searching, thanks --- In Doepfer_a100@yahoogroups.com, "miguel" wrote: > > from spain with love > > miguel >
2009-12-29 by miguel
from spain with love miguel
2009-12-28 by p. hendricks
Trying to make some room, so here's some bits for sale! All modules ship with mounting screws and power cable(unless passive) Payment: Paypal, Check or Money Order Shipping(from Seattle, WA USA): in USA $6 base +$1 for each additional module. Will ship USPS or FedEx Ground(depend
2009-12-27 by Tim
Hi Dan, The A-142 has an exponential converter controlling the discharge current of the main cap in there - presumably this gives a better 'feel' to the pot action than a straight linear relationship would. This expo converter has an 'offset' pot, the only trimpot on the board -
2009-12-26 by Florian Anwander
The decay length of the A142 does not depend on the gate length. leftbrain2002 wrote: > Thanks Florian, > > Mine has a 50K pot on it so assume it's normal. I am trying to shorten and VC the gates from a Modcan sequencer whose gates don't get short enough on shortest setting on th
2009-12-26 by dingfutzer
Misc. For Sale: MFB 99 Mixer - new in box - $89 MakeNoise/Wiard Wogglebug # 15 - new in box - $229 DOD 845 rackmount analog spring reverb - clean - $89 http://home.ptd.net/~eyesaw/Misc/4.jpg Behringer MDX 4600 Quad Comp/Lmtr - new in box - $59 http://home.ptd.net/~eyesaw/Misc/07.
2009-12-26 by leftbrain2002
Thanks Florian, Mine has a 50K pot on it so assume it's normal. I am trying to shorten and VC the gates from a Modcan sequencer whose gates don't get short enough on shortest setting on the seq. Perhaps the A-142 is designed to extend the lengths of super short triggers where as
2009-12-26 by achtung_999
I meant the A190 of course.. On Sat, Dec 26, 2009 at 6:46 AM, achtung_999 wrote: > The a191 has a simple (digital) LFO that can sync to midi clock. Should > work ok. > Otherwise it is possible to do it by tuning the a147 on ear. And giving it > a reset once every so often using a
2009-12-26 by achtung_999
The a191 has a simple (digital) LFO that can sync to midi clock. Should work ok. Otherwise it is possible to do it by tuning the a147 on ear. And giving it a reset once every so often using a clock divider tapping from the midi clock. This is not a plug and play solution, but if
2009-12-26 by deividnb1
HI! Can anyone explain to me how I can assign my MIDI keyboards' velocity to CV2 of the A-190, so that I can modulate volume of a VCA/ cutoff frequency of a VCF...? Thanks!
2009-12-26 by deividnb1
Hi to all! I was wondering if there is a way to sync an A-147 with an A-190 MIDI interface. The idea is to make the LFO oscillate at the same speed as the MIDI clock, to the modulation locked to the tempo of an external device. Best regards, David
2009-12-25 by Günther Fersengeld
Hi, it´s an TFE Mini Tonkassettensystem broadcast desk from about 1976. It has 2-band EQ and a built in Limiter for each input and output channel. And a very nice sound. Greetings Silvio ________________________________ Von: achtung_999 An: Doepfer_a100@yahoogroups.com Gesendet:
2009-12-25 by achtung_999
Hello, What is the mixer that your modular is residing on? Is it an old broadcast desk? Interesting! Greeeetz & pleasant days to you too Ernst On Fri, Dec 25, 2009 at 6:43 PM, Günther wrote: > > > Hello > > I just joined this group and wanted to say Hi to everyone. > I've uploade
2009-12-25 by Günther
Hello I just joined this group and wanted to say Hi to everyone. I´ve uploaded a picture of my synth called Deep Thought in the photos section. I own this system for about ten years now ( but it wasn´t always that big ) and it´s the best synth I ever had. Since I don´t know any p
2009-12-25 by Florian Anwander
Hi Dan, can you tell us, what is written on the decay potentiometer? It should be 50kB or 54B. How does the decaytime react if you use an external CV? Florian leftbrain2002 wrote: > My A-142 bothers me because the only range of short envelopes are all in the first few degrees fro
2009-12-25 by leftbrain2002
My A-142 bothers me because the only range of short envelopes are all in the first few degrees from all the way down. As soon as I get up a bit, the envelopes are a few minutes long and can't even imagine the lenghths at 6 o'clock. I don't see any jumpers to change the range leve
2009-12-24 by ehrlich sebastien
Thank you so much Dieter. Merry Christmas ! iPhoneから送信 On 2009/12/14, at 10:54, wrote: > > Hi everybody. I wanted to know if anyone could give me the > > reference of blue LEDs used in the Doepfer modules. In fact, I > > ordered a System 100 modular with red LEDs and would eventu
2009-12-24 by davevosh@aol.com
bakis, thanks ! i hope everyone has a nice, safe holiday season ! best, dave [Non-text portions of this message have been removed]
2009-12-24 by Bakis Sirros
hi Members, i wish all of you a Great and Merry Christmas (or Holidays) and to have a New Year full of Peace, Happiness and musical Creativity! thanks, best regards, :-) Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel
2009-12-23 by Greg Cerveny
I was looking at this page (http://www.doepfer.de/a100_monster_base.htm) and saw an a100cgk in front of a monster. I got a little excited thinking about putting a monster w/ attached keyboard on a keyboard stand instead of having to use a table. Is it possible to attach the a100c
2009-12-23 by peteruertz
Ah, located in Düsseldorf/ Germany --- In Doepfer_a100@yahoogroups.com, "peteruertz" wrote: > > Hallo there, > some nice stuff to sell: > > Doepfer Ms-404 > Some little scretches on some letters, the rest is nearly mint! > 200,- euro > > Doepfer DIY Kit #1 Mint! > All with power
2009-12-23 by peteruertz
Hallo there, some nice stuff to sell: Doepfer Ms-404 Some little scretches on some letters, the rest is nearly mint! 200,- euro Doepfer DIY Kit #1 Mint! All with power supply with external transformer not includet: four 84 HP front rails 100,- euro Doepfer A-117 Noise / 808 43,-
2009-12-23 by yahoo@doepfer.de
Dear members, our case manufacturer has converted a few weeks ago to a new wood version with grained surface for the A-100 cases as they can no longer get the wood with the even surface that was used earlier. They have buyed up all of this wood type they could get. But since a fe
2009-12-23 by jamesulibarri
I'm looking for both. Had a couple Schaltwerks back in the day, and would like to get one again. If so email me at jamesulibarri@gmail.com
2009-12-23 by leftbrain2002
Just got four of these modules. Finally have precise control of all those functions that been ben har to tweak: PWM on oscs with no attenuators, Cwejman modules with no atten and dialing in noise and random sources to specific CV ranges. Thanks Dieter for a superb useful compact
2009-12-22 by Florian Anwander
Hi deividnb1 > But, what happens to the modules on the bus that don't need the +5V? They simply do not pick the 5 Volts, because they neglect the connector pin that feeds the 5 Volts. Florian
2009-12-22 by deividnb1
I need someone to kindly help me. I want to use an a-190 midi interface, and have to install an ad5 power supply. I am afraid that I do it wrong and wreck my whole synth! The instructions say that i have to install it into a free 16 pin connector on the bus, and that it will prov
2009-12-22 by phono 1337
i have to agree with the knob resistance on the dopefer modules, its just right :-) Paul On Mon, Dec 21, 2009 at 12:35 PM, Bakis Sirros wrote: > > > also, what i found especially pleasing, is the 'resistance' of the knobs' > movement. the knobs provide a good resistance, so you c
2009-12-21 by Bakis Sirros
also, what i found especially pleasing, is the 'resistance' of the knobs' movement. the knobs provide a good resistance, so you can make minute changes and your fingers cannot accidentally move the knob a lot, resulting in an unwanted rougher sound change... i am putting the forc
2009-12-21 by davevosh@aol.com
In a message dated 12/21/2009 3:11:42 AM Pacific Standard Time, synth_freak_2000@yahoo.com writes: the doepfer modules and the P9 cases prooved to be really roadworthy. bakis, while i use a p6 and a homemade case instead of the p9, i agree that the doepfer modules are very robust
2009-12-21 by Bakis Sirros
just wanted to report from my latest live with Pan Sonic: once again, my two Doepfer A100P9 cases and all my doepfer A100 modules performed great and, despite the fact that i had 4 vco's in my system, i did not had to re-tune any of the 4 vco's before my live performance. the doe
2009-12-19 by james.husted@mac.com
That sure looks like what the Doctor ordered - Friction Clutch When released, the joystick does not mechanically return to center, maintains present position. Available only with Standard Resistive joysticks. Those things sure do LOOK expensive for sure though. On Dec 18, 2009, a
2009-12-19 by Monroe Eskew
This company may offer it, with their "friction clutch" option: http://www.chproducts.com/oem/finger_resistive.html Though I'm not sure what they mean by that exactly. On Fri, Dec 18, 2009 at 12:40 AM, wrote: > > > Good idea, but one has to find a manufacturer who offers such a u
2009-12-18 by Greg Cerveny
Mmmm... I want one too! :) On Thu, Dec 17, 2009 at 11:54 PM, David Bulog wrote: > > > Wanted to Buy > Doepfer MSY1 or 2 midi to din sync > > please email me offlist > d2ba@xtra.co.nz > > thanks David > > > [Non-text portions of this message have been removed]
2009-12-18 by Florian Anwander
I like the basic idea of the function. But I could imagine that a solution should be made on the electronic level but not at the mechanical level. I think about a module named "track&hold & change by catch up" ;-) Principle: the incoming voltage is given to the output until a tri
2009-12-18 by yahoo@doepfer.de
> It is sometimes desirable to have a joystick snap back to the zero > position. It is also sometimes desirable for it to stay where it is > without having to hold it. Can we have both? What about a locking > joystick-- A spring-loaded joystick which also has a mechanical lever >
2009-12-18 by David Bulog
Wanted to Buy Doepfer MSY1 or 2 midi to din sync please email me offlist d2ba@xtra.co.nz thanks David
2009-12-18 by york luethje
Or you can simply buy two joysticks - this is the solution Dieter approves of. ________________________________ From: "james.husted@mac.com" To: Doepfer_a100@yahoogroups.com Sent: Friday, December 18, 2009 0:58:09 Subject: Re: [Doepfer_a100] joystick idea The non mechanical way t
2009-12-18 by james.husted@mac.com
The non mechanical way to do this is with a dual track and hold module that would allow the position of a spring loaded joystick to be saved where it is positioned. having a lag circuit after the track and hold would allow a smooth transition when coming out of the held voltage t
2009-12-18 by Monroe Eskew
It is sometimes desirable to have a joystick snap back to the zero position. It is also sometimes desirable for it to stay where it is without having to hold it. Can we have both? What about a locking joystick-- A spring-loaded joystick which also has a mechanical lever or knob t
2009-12-17 by thomas_escure
Thank you Dieter for your answer, I really think I'm gonna love that new sequencer ; it seems it's gonna have exactly what I need ! I don't need MIDI or CV, I don't need the additionnal fonctions... Only 8x 16 steps trigger tracks. Wonderful ! If it's ready in summer, very good.
2009-12-16 by zoog_angelspit
I'm in NYC and I'm looking for the bare frame (without the power unit) for the A-100. I'm after the unit at the top of this page: http://www.doepfer.de/a100_man/a100m_e.htm I'm only wanting it 3 units high. I know you can get similar ones from Shroff, but does anyone know (specif
2009-12-16 by Monroe Eskew
Is this due to crosstalk between proximate wires? On Wed, Dec 16, 2009 at 12:14 AM, Monroe Eskew wrote: > A basic question- > > If you plug stereo cables into the A100 sockets, the "ring" part is > grounded, and the "sleeve" part is unused. In stereo signals the > "ring" carries
2009-12-16 by new_potty
monoprice.com --- In Doepfer_a100@yahoogroups.com, Tony Karavidas wrote: > > Sure. The tip and sleeve are in the same places. There will simply be > an unconnected ring. Who's the supplier?I could use a few. > > > Tony > > Sent from my iphone >
2009-12-16 by david.salter@thomsonreuters.com
Dieter, I'm very happy you have pads and not keys on the TKB design, I hope you get it to NAMM so everyone gets to see it. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2