F.S: Doepfer Modules A117, A160/A161
2011-12-26 by miguel
a117 Dig Noise/808 source: 50 eur a160/a161. Clk sequencer & Clk Divider (interconnected): 80 eur both madrid -spain ask for shipping costs paypal accepted
Messages
Browse messages
Page 98 of 564 · 28179 messages matched
A-156 quantizer: anti users?
2011-12-25 by Marco Zambardi
Hello guys, merry Christmas to all. I was thinking to get a a-156 to quantize random smooth CBS from a wogglebug hoping to get similar result of a noisering. Have you ever tried this? what CBS mainly do you quantize? Does it work at audio rates? thx [Non-text portions of this mes
Re: A-156 quantizer: anti users?
2011-12-25 by marco_zambardi
sorry guys. My mobile changed cv in cbs.... --- In Doepfer_a100@yahoogroups.com, Marco Zambardi wrote: > > Hello guys, merry Christmas to all. > > I was thinking to get a a-156 to quantize random smooth CBS from a > wogglebug hoping to get similar result of a noisering. > > Have
Re: New Doepfer Module Video Tutorials
2011-12-24 by Raul
Here is Part 6 in the Sample and Hold Series. Sample Rate reduction with A148. http://www.youtube.com/watch?v=_on8klFYUY0 --- In Doepfer_a100@yahoogroups.com, "Raul" wrote: > > > > Hello Group. Here is video #3 in the Sample and Hold Series. > > Track and Hold with Doepfer A-148
Re: [Doepfer_a100] a132-4 power cable orientation
2011-12-24 by Florian Anwander
I don't own a A132-4, but looking at http://www.doepfer.de/A100_pictures/a-132-4.jpg I can see that there are two black-and-grey capacitors direct aside the connector. The grey stripe on the capacitor marks the negative side. Now check on the solder side of the pcb to which end o
Re: a132-4 power cable orientation
2011-12-24 by andy
Thanks florian, the red stripe is the opposite way to how Id imagined- its supposed to be pointing to the board not the edge of the PCB. --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > I don't own a A132-4, but looking at > http://www.doepfer.de/A100_pictures/a-1
a132-4 power cable orientation
2011-12-24 by andy
So I realised the horizontal power header wasn't marked after removing the cable... Does anyone know which direction to attach the cable on the PCB for this module? I'm assuming the red stripe is parallel to the edge of the board (pointing to the text jp1 on the PCB) but could an
Tuning the A-110 VCO
2011-12-23 by Ton Akveld
Dear group, Having encountered the problem of just getting my VCO's to play C4 (261,6 Hz) with Tune (P1) almost on 10 I followed the instructions from the A-110 Service Manual: Adjust the VCO Offset trimming potentiometer P6 so that the frequencies match to values of the table be
Re: Merry Christmas and Happy New Year to all !
2011-12-22 by Ton Akveld
+1 --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi list, :-) > > i wish to all the group members a Merry Christmas and a very Happy, > Creative and Healthy New Year. > > all the best for you and your families for > 2012. > > may more great and creative (modular) m
RE: [Doepfer_a100] Merry Christmas and Happy New Year to all !
2011-12-22 by david.salter@thomsonreuters.com
Merry Christmas and New Year to all · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · David From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of yahoo@doepfer.de Sent: 22 December 2011 12:25 To: Doepfer_a100@yahoogroups
Re : AW: [Doepfer_a100] Merry Christmas and Happy New Year to all !
2011-12-22 by Marc-Henri Arfeux
Merry Christmas too Bakis, to you and everyone. 2012 will for me be the year of the great Doepfer begining since I will order my A 100 system within february. Meanwhile I am already working on some books among those members of the group suggested to me. I thank them again and eve
Re: Merry Christmas and Happy New Year to all !
2011-12-22 by selfoscillate
merry christmas and a happy new year to all of you :) --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi list, :-) > > i wish to all the group members a Merry Christmas and a very Happy, > Creative and Healthy New Year. > > all the best for you and your families for
AW: [Doepfer_a100] Merry Christmas and Happy New Year to all !
2011-12-22 by yahoo@doepfer.de
Thank you Bakis. I also wish all members and their families Merry Christmas and a happy New Year! Thank's to all A-100 users and customers for using our products. I hope we will fulfil all your desires in the future. Dieter Doepfer P.S. I'm not in the company from Dec. 23 - Jan.
AW: [Doepfer_a100] Merry Christmas and Happy New Year to all !
2011-12-22 by York Luethje
Thanks Bakis. Same to you. York _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Bakis Sirros Gesendet: Donnerstag, 22. Dezember 2011 05:44 An: Doepfer_a100 group Betreff: [Doepfer_a100] Merry Christmas and Happy New Year to all ! hi li
Merry Christmas and Happy New Year to all !
2011-12-22 by Bakis Sirros
hi list, :-) i wish to all the group members a Merry Christmas and a very Happy, Creative and Healthy New Year. all the best for you and your families for 2012. may more great and creative (modular) music be created in 2012... ...with innovative and surprising new modules from Di
Re: A-119 (External Input / Envelope Follower)
2011-12-21 by Christopher de Groot
Thanks, that is pretty cool. Makes me want to buy a ribbon controller! So the A-119 is being used to trigger the next step in the sequence? Chris >>>> hi this one is cool http://www.youtube.com/watch?v=gOqlJEBwYWc&feature=plcp&context=C342f8baUDOEgsToPDskL4oYbS6PGI6ui-IHnbMAV6 T3
Re: A-119 (External Input / Envelope Follower)
2011-12-21 by t33thgrinder
hi this one is cool http://www.youtube.com/watch?v=gOqlJEBwYWc&feature=plcp&context=C342f8baUDOEgsToPDskL4oYbS6PGI6ui-IHnbMAV6 T33Th --- In Doepfer_a100@yahoogroups.com, "christopher_degroot" wrote: > > Hi, I was wondering if anyone knew of any interesting videos of the A-119 (Ex
Re: Diode Cascode Filter
2011-12-21 by diodefilter
Hello Stuart, I'll send more videos to youtube to show sound effects of the diode filter. You can download the last schematics at my homepage http://www.generalthings.de. The circuit layout is in process. An offset adjustment is useful to minimize noise. I hope to find a manufact
A-119 (External Input / Envelope Follower)
2011-12-21 by christopher_degroot
Hi, I was wondering if anyone knew of any interesting videos of the A-119 (External Input / Envelope Follower) in action? I'm pretty new to Doepfer and bought a bunch of mods second hand from a friend, including the A-119. Thanks, Chris
Re: Diode Cascode Filter
2011-12-19 by grimshaw_stuart
It's whetted my appetite to hear more. How about some freg/res sweeps? The simplicity of the design is very appealing. Stuart --- In Doepfer_a100@yahoogroups.com, "diodefilter" wrote: > > Hello everyone, > > I developed a diode cascode filter with 24db/Octave and lowpass function
Re: [Doepfer_a100] A-190-1 & A-170
2011-12-18 by Florian Anwander
Hi Ton Ton Akveld wrote: > Or can I route A-190-1 CV2 out through the A-170 to VCO CV1? You can do so. But keep in mind, what is said on http://www.doepfer.de/a170.htm: 'Additional technical remarks: If the upper slew limiter is used for precision applications (e.g. portamento/gl
Re: A-190-1 & A-170
2011-12-18 by Ton Akveld
Hi Florian, Thanks for your answer. I'll sure take in mind what's said about the A-170. Alas I forgot to check for the version on the PC board :-( I'll do that next time I put a new module in. Kind regards, Ton --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi T
A-190-1 & A-170
2011-12-17 by Ton Akveld
Dear group, In case I want to use the A-170 slew limiter together with the A-190-1 MIDI-to-CV do I have to disconnect the CV-link of the A-190-1? Or can I route A-190-1 CV2 out through the A-170 to VCO CV1? Kind regards, Ton
Re: VCO simultaneous output
2011-12-17 by Ton Akveld
ThanX! I thought so, but haven't found a demo or video actually showing this. --- In Doepfer_a100@yahoogroups.com, "KeldS" wrote: > > Of course you can. That's what's great in a modular. > > Keld > > --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" wrote: > > > > Dear group, > >
Re: VCO simultaneous output
2011-12-17 by KeldS
Of course you can. That's what's great in a modular. Keld --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" wrote: > > Dear group, > > Can I use the A-110's four output simultaneously? > Or does that draw too much current? > > Kind regards, > > Ton >
VCO simultaneous output
2011-12-17 by Ton Akveld
Dear group, Can I use the A-110's four output simultaneously? Or does that draw too much current? Kind regards, Ton
Re: Anybody popcorn?
2011-12-17 by Ton Akveld
York, Rudy, ThanX! I'm getting close (and closer). Kind regards, Ton --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" wrote: > > Hi group, > > I hardly dare to ask, but does anybody have a patch for creating the sound of Gershon Kingsley's Popcorn? >
Modules for sale UK/EU
2011-12-16 by brianhamlin@btinternet.com
A couple of modules I need to part with to fund other modular purchases; A-105 VCF SSM £60 A-163 VC divider £45 reply to brianhamlin AT btinternet.com cheers Brian
FOR SALE: MOOG ANALOG DELAY 104-Z AND FREQBOX VCO 107
2011-12-15 by jesus
Hi, Cheap Moogerfoogers, near mint-to mint shape. MF-104Z: Already discontinued. Ridiculously expensive if new. I just want $500 plus s/h. MF-107: Great Moog oscillator. Want $250 plus s/h Buy them both and I'll throw in the rackmounting rack thingie.. Contact me at gretchenDOTli
Re: [Doepfer_a100] A-100 book now available
2011-12-15 by Bakis Sirros
great! when its ready in English, please, let us know Dieter. Bakis Sirros [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org.
A-100 book now available
2011-12-15 by yahoo@doepfer.de
I just wanted to mention that the A-100 book by Andreas Krebs is now available (so far only in German). 320 very detailed pages, fully colored, hard cover and a lot of patch examples and useful hints. Fully recommendable and a fair price for this quality. I asked Andreas to publi
Diode Cascode Filter
2011-12-15 by diodefilter
Hello everyone, I developed a diode cascode filter with 24db/Octave and lowpass function. Resonance is possible (sine wave). This vcf should be controlled with a linear ADSR. I want to know wheather you like it's sound! You can hear it here: http://www.youtube.com/watch?v=SvKMRuH
Re: [Doepfer_a100] Anybody popcorn?
2011-12-15 by Rudy Toussaint
All you need is a vco, vca, vcf and ADSR Very short attack and decay on the vca and lopass filter. I would use a square wave or almost distorted triangle. Rudy ________________________________ From: Ton Akveld To: Doepfer_a100@yahoogroups.com Sent: Wednesday, December 14, 2011 11
Re: A-156 problem
2011-12-14 by aletropdj
Hi Dieter. I try again today and use the pre-post and not pos-post and work perfectly... I dont know what is the difference considering the glide is 0... --- In Doepfer_a100@yahoogroups.com, wrote: > > My recommendation is to use the single step to adjust each note of the > seque
AW: [Doepfer_a100] Anybody popcorn?
2011-12-14 by York Luethje
The main, bouncy, sound? I have always assumed that that was a simple sawtooth into a lowpass filter at very high resonance and pretty high frequency. Colored of course by what must have been a somewhat idiosyncratic Moog System 3 or so at the time. _____ Von: Doepfer_a100@yahoog
Re: [Doepfer_a100] Demos of modules
2011-12-14 by james.husted@mac.com
I forgot about ribbon controllers - most ribbon controllers that have a pressure output use FSR technology. I guess I amend it to "There are other touch and pressure products out there but few that use FSRs". Our FSR modules are not like ribbon controllers - they provide no posit
Anybody popcorn?
2011-12-14 by Ton Akveld
Hi group, I hardly dare to ask, but does anybody have a patch for creating the sound of Gershon Kingsley's Popcorn?
Re: [Doepfer_a100] Re: A-156 problem
2011-12-14 by Florian Anwander
Hello Am 14.12.2011 14:57, schrieb aletropdj: > :/ > > So I'll never have a solid sequence... > i will try again. > --- In Doepfer_a100@yahoogroups.com, wrote: >>> The problem is the pitch. the notes is not always the same. >>> If my patern is C,D,C,D; at some time change for C,D
AW: [Doepfer_a100] Re: A-156 problem
2011-12-14 by yahoo@doepfer.de
My recommendation is to use the single step to adjust each note of the sequence. Move the knob CW until the next semitone beyond the wanted tone is generated. Then turn the knob CCW until the semitone below the wanted tone is generated. Then turn the knob into the middle of these
Re: A-156 problem
2011-12-14 by aletropdj
:/ So I'll never have a solid sequence... i will try again. --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hi. > > > > My quantizer is crazy. > > The connection i normally use is: > > > > A155 > A156 > A110/A140 > > > > The problem is the pitch. the notes is not always the sam
Re: [Doepfer_a100] Demos of modules
2011-12-14 by Zoë Blade
I can see how interfaces benefit from an in-person demo, but even with those types of modules, actually hearing the A-198 being used to play some music with lots of portamento and tremolo in a sound clip does help to show off what it can do that you can't easily do with, say, a M
Re: AW: [Doepfer_a100] A-142-4 ... who has got one already?
2011-12-14 by Jakob Paulussen
thank you for the explanation. it helps a lot with the decision making. cheers Jakob Am 14.12.2011 10:14 schrieb : > ** > > > > Hi everyone, > > I'm pondering the purchase of the A-142-4 quad Decay module. > > There is still little information and no sound or patch examples, > >
AW: [Doepfer_a100] A-156 problem
2011-12-14 by yahoo@doepfer.de
> Hi. > > My quantizer is crazy. > The connection i normally use is: > > A155 > A156 > A110/A140 > > The problem is the pitch. the notes is not always the same. > If my patern is C,D,C,D; at some time change for C,D#,C#,D... > > The gate not always trigger. at some time dont trig
AW: [Doepfer_a100] A-142-4 ... who has got one already?
2011-12-14 by yahoo@doepfer.de
> Hi everyone, > I'm pondering the purchase of the A-142-4 quad Decay module. > There is still little information and no sound or patch examples, > no pdf file with more detailed information. > I have e.g. A-143-1, A-143-2 and A-142 VCD and wonder if the > A-142-4 offers sonic po
AW: [Doepfer_a100] Demos of modules
2011-12-14 by yahoo@doepfer.de
> Most of the product we make in our Force Sensing Resistor (FSR) > line only make an impression when actually touched and played. > There are other touch and pressure products out there but none > that use FSRs ... In the A-198 and R2M FSR's are used since about 10 years :-) Bes
A-156 problem
2011-12-14 by aletropdj
Hi. My quantizer is crazy. The connection i normally use is: A155 > A156 > A110/A140 The problem is the pitch. the notes is not always the same. If my patern is C,D,C,D; at some time change for C,D#,C#,D... The gate not always trigger. at some time dont trigge one step. What is t
A-142-4 ... who has got one already?
2011-12-13 by jakobsweb
Hi everyone, I'm pondering the purchase of the A-142-4 quad Decay module. There is still little information and no sound or patch examples, no pdf file with more detailed information. I have e.g. A-143-1, A-143-2 and A-142 VCD and wonder if the A-142-4 offers sonic possiblities t
[Doepfer] Dark Energy / Dark Time Custom End Panels
2011-12-13 by Ns Na
Hello list Just picked these custom made end panels up. For a Dark Energy / Dark Time on ebay, thought maybe someone on the list may like a pair see link below. http://www.ebay.co.uk/itm/Doepfer-Dark-Energy-Dark-Time-Custom-End-Panels-X-2-Sets-/150718467602 Best Rob Sent from Yah
Re: [Doepfer_a100] Demos of modules
2011-12-13 by james.husted@mac.com
Most of the product we make in our Force Sensing Resistor (FSR) line only make an impression when actually touched and played. There are other touch and pressure products out there but none that use FSRs, and when people play our FSR modules they are typically very surprised with
Re: [Doepfer_a100] Re: Demos of modules
2011-12-13 by Zoë Blade
Exactly! All companies who believe in their products and want to maximise their sales really should let customers try them out. Make wanting and buying the product as easy as possible!