Yahoo Groups archive
Messages
Page 97 of 564 · 28179 messages matched
2012-01-09 by sean_process
All Doepfer modules now sold. Analogue Systems modules going on evilbay soon... --- In Doepfer_a100@yahoogroups.com, "sean_process" wrote: > > Modules still available: > > Doepfer: > a116 Waveform Processor SOLD > a143-2 Quad ADSR SOLD > a160 Clock Divider SOLD > a161 Clock Seque
2012-01-08 by Zoë Blade
Hi everyone! So I don't own either of the modules discussed (although I'm hoping to get an A-199 next week), but as an owner of an A-188-1B, I'd like to chip in with a suggestion: if in doubt about which module to get, make sure you at least have one module with some kind of feed
2012-01-08 by sean_process
I agree with Florian - a dedicated digital effects unit is very useful, and better quality can be had in an external unit. I have the a-199 Spring Reverb and have modded it with two front panel phono sockets so that I can easily change reverb tanks. I have mounted the stock tank
2012-01-08 by Ton Akveld
Hi Florian, Thank you for the explanation and advice. As soon as salary payment is near I'll order a A-199 through the Dutch Doepfer representative. Ton --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello Ton > > > The A-199 has won ;-) > If you are using some
2012-01-08 by Florian Anwander
Hello Ton > The A-199 has won ;-) If you are using some kind of MIDI control / MIDI sequencer, then I think an external DSP Device (standard MultiFX) does serve you better, than the A-187-1. The A-187 is assumingly based on a standard OEM-DSP-Chip, which has the quality of maybe
2012-01-07 by Ton Akveld
Thanks guys, The A-199 has won ;-) --- In Doepfer_a100@yahoogroups.com, achtung_999 wrote: > > Don't know the A187-1 but I love my A199. > Spring reverb is so much more than just reverb... > > > On Sat, Jan 7, 2012 at 12:09 PM, Bakis Sirros wrote: > > > ** > > > > > > > > > > IMO
2012-01-07 by achtung_999
Don't know the A187-1 but I love my A199. Spring reverb is so much more than just reverb... On Sat, Jan 7, 2012 at 12:09 PM, Bakis Sirros wrote: > ** > > > > > IMO, no comparison at all! > > the A199 Spring Reverb has a special quality totally different than the > dsp reverbs. (a
2012-01-07 by Raul
Amazing. Thank you. I'll test this out. All the best. Raul --- In Doepfer_a100@yahoogroups.com, Richard Horsman wrote: > > Hi Raul > > Here's how I see it. > > First: Modulation of the N CV will just vary the number of possibilities of the output voltages at N+1 and 2^N, not modu
2012-01-07 by Bakis Sirros
IMO, no comparison at all! the A199 Spring Reverb has a special quality totally different than the dsp reverbs. (and the A187 DSP) i like the A199 so much, that i have two and used them countless times in the last 10 years! definitely go for the A199! it will give you that metall
2012-01-07 by Ton Akveld
Dear group, I am in doubt. Financially I can afford myself to only buy one or two modules a month, so choices have to be made ;-) I want to add some reverb capability to my A-100 system in progress, and I have to choose between the A-187-1 VC DSP Effects module and the A-199 Spri
2012-01-07 by York Luethje
No VCAs? _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Paul Wagorn Gesendet: Freitag, 6. Januar 2012 18:53 An: Doepfer_a100@yahoogroups.com Betreff: [Doepfer_a100] FA: MOTM System Full MOTM System: http://cgi.ebay.com/ws/eBayISAPI.dl
2012-01-06 by Paul Wagorn
Full MOTM System: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270888323990 Cheers, Paul
2012-01-06 by sean_process
Modules still available: Doepfer: a116 Waveform Processor SOLD a143-2 Quad ADSR £135 165 a160 Clock Divider £35 43 a161 Clock Sequencer £35 43 a162 Dual Trigger Delay £35 43 a170 Dual Slew Limiter £40 46 Analogue Systems: RS-110 Multimode Filter £90 110 RS-210 Fixed Filter
2012-01-06 by Richard Horsman
Hi Raul Here's how I see it. First: Modulation of the N CV will just vary the number of possibilities of the output voltages at N+1 and 2^N, not modulate the voltages themselves. At N=1 you have 2 possible voltages at the outputs. At N=6 you have 7 possible voltages at N+1 and 64
2012-01-06 by York Luethje
Ah, okay. My bad. _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Zoë Blade Gesendet: Donnerstag, 5. Januar 2012 19:01 An: Doepfer_a100@yahoogroups.com Betreff: Re: AW: [Doepfer_a100] Service manual > Couldn't you just download the ind
2012-01-06 by Zoë Blade
> Couldn’t you just download the individual PDFs from the Doepfer website? I believe the website only has the owner's manuals (although they're an interesting read too), not the service notes. It also has (nearly) all the A-100 manuals in one big PDF, for what it's worth, which i
2012-01-05 by York Luethje
Hi Zoe, Couldn't you just download the individual PDFs from the Doepfer website? They are free. York _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Zoe Blade Gesendet: Donnerstag, 5. Januar 2012 17:50 An: Doepfer_a100@yahoogroups.com
2012-01-05 by Zoe Blade
Hi! Out of curiosity, would it be possible to buy the service manual in PDF form? It's a little bit on the pricey side as it is, and judging by the cost of the owner's manual, I'm guessing that's mostly due to printing and postage, especially considering how much longer the servi
2012-01-05 by miguel
in good cond. miguel (madrid spain)
2012-01-05 by Raul
I had a few questions about the Quantized Random Voltages Section of this module. First: The manual states that "N is an integer number in the range 1...6 that can be adjusted with the manual control (Man N) and an external control voltage CVN with attenuator." The CV fed into th
2012-01-05 by Ton Akveld
Hi Marco, From the DI it goes to the L/MONO input on my amplifier, a Roland KC-110. --- In Doepfer_a100@yahoogroups.com, "marco_zambardi" wrote: > > hi tony, > > forgot to say, i am using Intellijel Buffered Multi, not the A-180. > but from the DI then where you plug the signal?
2012-01-05 by marco_zambardi
hi tony, forgot to say, i am using Intellijel Buffered Multi, not the A-180. but from the DI then where you plug the signal? --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" wrote: > > Hi Marco, > > Thanks for the description! > I route my end signal through a multiples so I can
2012-01-04 by Ton Akveld
Hi Marco, Thanks for the description! I route my end signal through a multiples so I can send one to the di-box and amplifier and the other to the oscilloscope (see http://groups.yahoo.com/group/Doepfer_a100/photos/album/1838015066/pic/57965373/view?picmode=&mode=tn&order=ordinal
2012-01-04 by marco_zambardi
Hello Tony, yes, my external line mixer (a behringer eurorack pro) get a mono signal (Left/Mono In used) and split it on my Left and Right monitor (of course there is no real stereo fx in this case, the same signal is brought to L and R). this works both in case a multiple is use
2012-01-03 by Florian Anwander
The sockets used by Doepfer aren't standard 3.5mm mono sockets (where no real standard exists), but special sockets, where the ground contact is more raised to the place, where on a stereo(=headphone) jack the "ring" contact is. This is no problem with mono jack connectors, but c
2012-01-03 by Ton Akveld
Dear Florian, Thank you for this explanation! This does shed a bright light on my 'problem'. Kind regards, Ton --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > The sockets used by Doepfer aren't standard 3.5mm mono sockets (where no > real standard exists), but sp
2012-01-03 by Ton Akveld
Hi Marco, Thanks for thinking with me ;-) You write: > i have my external mixer bringing the mono-signal to L and R speaker. Does it still after routing through a multiples? Love to hear! Ton --- In Doepfer_a100@yahoogroups.com, "marco_zambardi" wrote: > > strange... > usually mo
2012-01-03 by Ton Akveld
Hi York, Thanks for your prompt reply. I am aware of the mono character of the modular system. So on stereo headphones left and right are the same. What puzzles me is the fact one channel 'disappears' when routing the signal through a multiples. It however dawned on me that might
2012-01-03 by Antonio Grazioli
Hi everybody, I am moving to a new house in the next months and unfortunately cannot keep this beast with me. see it here: http://jpegbay.com/gallery/001370586-.html As you can see it's quite a huge modular system, with 62 Doepfer Modules, 17 Analogue Systems, 4 Analogue Solution
2012-01-03 by sean_process
Also for sale: a116 VC Waveform Processor £35 sean --- In Doepfer_a100@yahoogroups.com, "sean_process" wrote: > > Hi all > > I'm selling the following modules to make space for some new bits. All modules are in excellent condition with only the usual minor rack rash. > > Doepfer:
2012-01-03 by marco_zambardi
strange... usually modules use mono jack in and patching them with a stereo cable have no effect since there should be no connection (except for modules with a switch in the jack in to break normalled connection). i have my external mixer bringing the mono-signal to L and R speak
2012-01-02 by sean_process
Hi all I'm selling the following modules to make space for some new bits. All modules are in excellent condition with only the usual minor rack rash. Doepfer: a143-2 Quad ADSR £135 a160 Clock Divider £35 a161 Clock Sequencer £35 a170 Dual Slew Limiter £40 Analogue Systems: RS-110
2012-01-02 by Bakis Sirros
yes, of course, more than one. Bakis ________________________________ From: Stuart To: "Doepfer_a100@yahoogroups.com" Sent: Monday, January 2, 2012 9:02 PM Subject: Re: [Doepfer_a100] Happy New Year to all! Hi Bakis, Same to you. Any music projects on the agenda for 2012? Kind re
2012-01-02 by Matt Fretton
I just bought a Dark Time (from EMIS), which is great, but in the manual it says to press the Step button once to go into step mode then each repeated press of the Step button should advance the sequence by one step, but this doesn't work on. If the Dark Time in play mode & I pre
2012-01-02 by Stuart
Hi Bakis, Same to you. Any music projects on the agenda for 2012? Kind regards, Sjoerd ________________________________ From: Bakis Sirros To: Doepfer_a100 group Sent: Monday, January 2, 2012 12:07 AM Subject: [Doepfer_a100] Happy New Year to all! Happy New Year to all members! w
2012-01-02 by York Luethje
Hi Ton, Happy New Year to you as well. Modular signals are generally mono. An oscillator generates one waveform, not two left and right ones and the following signal chain will thus also be in mono. York _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com
2012-01-02 by Ton Akveld
Dear group, Just like Bakis I want to wish you all a good 2012! But now, something completely different. When plugging in headphones in an audio out connector (VCA, mixer) I hear both the left and right channel. However, if I route the audio out through a multiples, the audio sig
2012-01-01 by Bakis Sirros
Happy New Year to all members! wishing a 2012 with Health, lots of Creative new music and Great New module designs from Dieter Doepfer and the other euro module makers! best regards, :-) Bakis. Bakis Sirros www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Wo
2011-12-31 by Florian Anwander
Hello Marco Marco Zambardi wrote: > anyone have tried it? Yes. I assume all A100 users with more than 6 HE do it like that - including me, Bakis, Hans Zimmmer, Dieter with his former exhibition system. Florian
2011-12-31 by marco_zambardi
guys, thank you so much for sharing your experiences! Happy 2012 to all of you! --- In Doepfer_a100@yahoogroups.com, Jakob Paulussen wrote: > > Hi, > I have one rack with 4 of the G6 frames stacked on each other and a second > rack with 2 stacked on top of each other, all packed
2011-12-31 by Jakob Paulussen
Hi, I have one rack with 4 of the G6 frames stacked on each other and a second rack with 2 stacked on top of each other, all packed with modules often switched on for long sound tweaking hours. Never experienced a heating problem. So, go right ahead and start stacking :-) and enj
2011-12-31 by Marco Zambardi
Hi Florian thanks. i know there is any fan in the case :-) just wonder is anyway such holes on the upper part of the case have any role in dissipating heat or can be closed without risking damages to modules for overheating... anyone have tried it? On Fri, Dec 30, 2011 at 2:43 PM
2011-12-30 by Florian Anwander
Hello Marco, These ventilation holes are not necessary (e.g.: the 6HE Case doesn't have any ventilation). Florian marco_zambardi wrote: > i have noticed that the Doepfer case has some hole in the upper side, > maybe to avoid overheting,
2011-12-30 by Antonio Tuzzi
On 30/dic/2011, at 11.04, marco_zambardi wrote: > hi, > > i am finished my first 6U case (a classical Doepfer G6 in aluminium) and would like to expande the system with a second 6U case. > > since i have not enought space to put them side by side i am thinking to place the second
2011-12-30 by marco_zambardi
hi, i am finished my first 6U case (a classical Doepfer G6 in aluminium) and would like to expande the system with a second 6U case. since i have not enought space to put them side by side i am thinking to place the second 6U case directly over the first one (so to have a kind of
2011-12-29 by Raul
Here is Part 7 in the Sample and Hold Series. Using other waveforms in T/H and S/H with Doepfer A148 http://www.youtube.com/watch?v=aX7k9UPQJ2M Thanks all. Raul --- In Doepfer_a100@yahoogroups.com, "Raul" wrote: > > Here is Part 6 in the Sample and Hold Series. > Sample Rate redu
2011-12-29 by Denis Gökdag
Nice! Definitely grabbing two to replace my two A-143-3 :-) Denis On Dec 27, 2011, at 10:06 AM, Bakis Sirros wrote: > A143-4 Quad VC-LFO/VCO module announced for 9th of January!http://www.doepfer.de/a1434.htm > > > > [Non-text portions of this message have been removed]
2011-12-28 by miguel
hi folks! recently i ve purchased a MAQ 16/3 , latest firmware, silver version, It runs nicely with MIDI but when i connect it to my little phatty or my a100 via cv/gate nothing happens..., any suggestions? thanks in advance & merry xmas ! miguel
2011-12-28 by miguel
sold --- In Doepfer_a100@yahoogroups.com, "miguel" wrote: > > a117 Dig Noise/808 source: 50 eur > a160/a161. Clk sequencer & Clk Divider (interconnected): 80 eur both > > madrid -spain > ask for shipping costs > paypal accepted >
2011-12-27 by Bakis Sirros
A143-4 Quad VC-LFO/VCO module announced for 9th of January!http://www.doepfer.de/a1434.htm Bakis Sirros www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. or