Doepfer

Hi Andreas,

The Analogue Systems Integrator (     : )  BTW Analogue Solutions make concussor modules) are definatley compatible as are any manafacturers modules, the only thing to watch out for are old Paia VCO's as they use the old Korg Hz/V scaling, all recent systems use 1V/oct.

I can't comment on the midi interface but will say that I have both VCO's types, a VC LFO, VC ADSR, Comb filter, Reverb/Chorus and a Trigger shaper. They all have a different character to their A100 equivilants (where they exist) and that is why I like them. Good build quality and more finger space per module. These sit in the same cabinet as my A100 modules. Note that their front panel screw holes are offset differently from the A100's so you may get small gaps when mixing on the same row.

Some of the analogue Solutions modules are quite nice as bread and butter modules. These match the A100 panel size exactly.

If you are prepared to have slightly off the wall modules, www.blacet.com, do some nice stuff and sort of fits in a A100 rack, they are a few mm too high.

There are also different panel size systems worth considering, i.e. MOTM and the diy variants like Oakley, Arick (synthesiser.com).

Regards

David


                                                                                                                       
                    Andreas Lindholm                                                                                   
                    <andreas.k.lindholm@       To:      Doepfer_a100@yahoogroups.com                                   
                    telia.com>                 cc:                                                                     

                                                Subject:     [Doepfer_a100] You, you - maniacs =)                      
                    26/02/2002 16:58            Header:      Internal Use Only                                         
                    Please respond to                                                                                  
                    Doepfer_a100                                                                                       
                                                                                                                       
                                                                                                                       



Please all take note of the smiley! ;)

After reading about the pretty massive systems most of you seem to have I
don't understand what kind of money you spend on this! Also noted  the fact
that a few seem to own systems from different makers I have a few questions.

First of all I am considering buying a row or two(actually just a bigger
case and fill it in the future) of Analog Solutions integrator just because
it is supposed to be compatible with dopefer. Anybody own an AS system? Have
you successfully managed to mix doepfer and AS modules? And finally is the
AS midi-cv module as good or better than doepfers? I find it more spec'd and
cheaper and also that it would take less space in the rack. I am considering
this to again reconnect to my A100 using midi.

/Andreas

                                                    
               Yahoo! Groups Sponsor                
                                                    
                                                    
                                                    
                   ADVERTISEMENT                    
                                                    
                                                    
                                                    
                                                    
                                                    



To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





-------------------------------------------------------------- --
        Visit our Internet site at http://www.reuters.com

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.

hi andreas,

like david, i also own some analogue systems modules along w 
some blacet but cannot comment on the AS midi/cv module.   i'm 
guessing it would work at least as well as the A190.  as for the 
others in general, from my experience they function very well 
together w the A100 and were to some extent built w doepfer 
users in mind.  the AS modules sound nice but are the only ones 
giving me jack problems(!!).  though easy to fix, still can be 
inconvenient.  on the subject of patch cables, AS makes several 
colors of varied lengths, are of  good quality, and are cheaper 
than doepfer supplied cables.  unless you build your own, i think 
these are the best option.

regarding blacet, these modules are of higher build quality, and 
for not much more do-re-mi.  i would not recommend altering the 
faceplate to fit into a doepfer case, not only are the power 
requirements different (15v), most of the boards are too deep 
anyway.  the one exception is the dark star which has a shallow 
board and will run on the doepfer power bus with the supplied 
adaptor (but they don't make this module anymore).  blacet  can 
supply a high quality powered case kit for $111, i highly 
recommend this option if you decide to try some of thier 
modules.  

i hope i'm not drifting too far from the subject of the A100, but 
obviously mixing manufacturers will certainly expand the range of 
sounds coming from your A100 (i still consider my rig to be an 
A100 at heart).  and for me, another result is this sort-of 
openness is that it has incidentally increased my appreciation 
for doepfer. 

duff


--- In Doepfer_a100@y..., david.salter@r... wrote:
> 
> Hi Andreas,
> 
> The Analogue Systems Integrator (     : )  BTW Analogue 
Solutions make concussor modules) are definatley compatible 
as are any manafacturers modules, the only thing to watch out 
for are old Paia VCO's as they use the old Korg Hz/V scaling, all 
recent systems use 1V/oct.
> 
> I can't comment on the midi interface but will say that I have 
both VCO's types, a VC LFO, VC ADSR, Comb filter, 
Reverb/Chorus and a Trigger shaper. They all have a different 
character to their A100 equivilants (where they exist) and that is 
why I like them. Good build quality and more finger space per 
module. These sit in the same cabinet as my A100 modules. 
Note that their front panel screw holes are offset differently from 
the A100's so you may get small gaps when mixing on the same 
row.
> 
> Some of the analogue Solutions modules are quite nice as 
bread and butter modules. These match the A100 panel size 
exactly.
> 
> If you are prepared to have slightly off the wall modules, 
www.blacet.com, do some nice stuff and sort of fits in a A100 
rack, they are a few mm too high.
> 
> There are also different panel size systems worth considering, 
i.e. MOTM and the diy variants like Oakley, Arick 
(synthesiser.com).
> 
> Regards
> 
> David
> 
> 
>                                                                                                                        
>                     Andreas Lindholm                                                                                   
>                     <andreas.k.lindholm@       To:      
Doepfer_a100@y...                                   
>                     telia.com>                 cc:                                                                     
>                                                 Subject:     [Doepfer_a100] You, you 
- maniacs =)                      
>                     26/02/2002 16:58            Header:      Internal Use 
Only                                         
>                     Please respond to                                                                                  
>                     Doepfer_a100                                                                                       
>                                                                                                                        
>                                                                                                                        
> 
> 
> 
> Please all take note of the smiley! ;)
> 
> After reading about the pretty massive systems most of you 
seem to have I
> don't understand what kind of money you spend on this! Also 
noted  the fact
> that a few seem to own systems from different makers I have a 
few questions.
> 
> First of all I am considering buying a row or two(actually just a 
bigger
> case and fill it in the future) of Analog Solutions integrator just 
because
> it is supposed to be compatible with dopefer. Anybody own an 
AS system? Have
> you successfully managed to mix doepfer and AS modules? 
And finally is the
> AS midi-cv module as good or better than doepfers? I find it 
more spec'd and
> cheaper and also that it would take less space in the rack. I am 
considering
> this to again reconnect to my A100 using midi.
> 
> /Andreas
> 
>                                                     
>                Yahoo! Groups Sponsor                
>                                                     
>                                                     
>                                                     
>                    ADVERTISEMENT                    
>                                                     
>                                                     
>                                                     
>                                                     
>                                                     
> 
> 
> 
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@y...
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> 
> 
> 
> 
> 
> -------------------------------------------------------------- --
>         Visit our Internet site at http://www.reuters.com
> 
> Any views expressed in this message are those of  the  
individual
> sender,  except  where  the sender specifically states them to 
be
> the views of Reuters Ltd.