Fairlight-CMI

Hi David, 

In general you should be able to replace a 2716 with a 27C16. It does depend 
somewhat on the circuits and bus configuration as the logic thresholds, 
access time and fanout might be a little different in the CMOS EPROM. It is 
likely the CMOS part will draw less current that the NMOS part does. 

Regards, 

Tristan 

dvdborn writes: 

> I've almost finished restoring a Fairlight CPU Card for the Series IIx. The only thing that still 
> needs to happen is burning the EPROMS. 
> 
> I've got an EPROM burner but it doesn't support 2716 or 2516 type EPROMS, only 27C16. 
> 
> The service manual says that a 2716 or 2516 eprom needs to be used.
> Can anyone tell me if it's also possible to use the 27C16 as a replacement? 
> 
> Best,
> David 
> 
>  
>