Fairlight-CMI

Don't take the thumb screws all the way out, just screw them back in about 2
or 3 turns and them use them as grips to pull the card out.

Only screw them all the way in once your fault finding is over.

[Steve]

 

SteveRance

 

From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]
On Behalf Of michael.poulain
Sent: Sunday, March 15, 2009 6:22 AM
To: Fairlight-CMI@yahoogroups.com
Subject: [Fairlight-CMI] Removal of Audio Output Cards on MFX2

 

Hello All,

Hope you all enjoying your weekend. 

Have found out why channels 5 & 6 on my MFX2 in CMI III mode were not
working - one of the audio output cards on the back is defect. As I am a new
CMI owner have run into another small problem. I was advised by my good
friend Peter in Sydney to swop output 3 & 4 for 5 & 6 to make 100% sure that
we have found the fault. The only problem is, that I am having a little
trouble removing the cards from the back side of the machine.

There are 2 from hand detachable screws per output card. would somebody
please explain to me the procedure for removing the cards safely.

Thanks for your help as always gents

Best Regards

Michael