Synth-DIY Yahoo! Groups Archives

Dear Steve,

Thanks for the tip. I removed the cards 3/4 & 5/6, and the beasty is working again on full trusters - must have just been a loose connection somewhere. If you could keep your eye open for me mate for a full functional Series III Keyboard that I can plug into my MFX2. At the the moment I am using as a master keyboard a Döppfer LMK2+, but to have an origional Series III keyboard for the beasty would be wonderful.

Hope business is well and thanks again for your help

Best Regards

Michael

Mit freundlichen Grüßen
Michael.A.J.H. Poulain
Manager
Marine Sales & Application Engineering
MTU Friedrichshafen GmbH
R1M
Maybachplatz 1
88045 Friedrichshafen
Germany
Telefon: +49 (7541) 90-3488 (R1M)
Mobile: +49 (176) 17900122
Fax: +49 (7541) 90-7081

mailto:michael.poulain@mtu-online.com
http://www.100yearsmtu.com

Ein Unternehmen der Tognum-Gruppe/A Tognum Group Company

Vorsitzender des Aufsichtsrates/Chairman of the Supervisory Board:
Rolf Eckrodt

Geschäftsführung/Board of Management:
Volker Heuer, Vorsitzender/President and CEO
Christof von Branconi, Rainer Breidenbach, Joachim Coers, Dr. Gerd-Michael Wolters

Sitz/Domicile: Friedrichshafen
Handelsregister/Register Court: Ulm, Nr./No. HRB 630 227

Von: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] Im Auftrag von Steve Rance
Gesendet: Sonntag, 15. März 2009 18:09
An: Fairlight-CMI@yahoogroups.com
Betreff: RE: [Fairlight-CMI] Removal of Audio Output Cards on MFX2

Dont take the thumb screws all the way out, just screw them back in about 2 or 3 turns and them use them as grips to pull the card out.

Only screw them all the way in once your fault finding is over.

[Steve]

From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] On Behalf Of michael.poulain
Sent: Sunday, March 15, 2009 6:22 AM
To: Fairlight-CMI@yahoogroups.com
Subject: [Fairlight-CMI] Removal of Audio Output Cards on MFX2

Hello All,

Hope you all enjoying your weekend.

Have found out why channels 5 & 6 on my MFX2 in CMI III mode were not working - one of the audio output cards on the back is defect. As I am a new CMI owner have run into another small problem. I was advised by my good friend Peter in Sydney to swop output 3 & 4 for 5 & 6 to make 100% sure that we have found the fault. The only problem is, that I am having a little trouble removing the cards from the back side of the machine.

There are 2 from hand detachable screws per output card. would somebody please explain to me the procedure for removing the cards safely.

Thanks for your help as always gents

Best Regards

Michael

Fairlight-CMI

AW: [Fairlight-CMI] Removal of Audio Output Cards on MFX2

Attachments

Move to quarantaine