Hi, I have a Fast Track Pro myself. As far as the drivers are concerned there really are none for the mac. It is a class compliant dievice and should work just fine. That is why there are no controls for it. As far as the headphones are concerned... were do you choose headphones out? There is no separate headphone out on the fast track..it just plays what you here through the monitors through the headphones...similar to a stereo... You may have just picked an I/O that was labeled headphones out... just make sure that fast track is picked as your output device. Then make sure the mix and the A/B switches are set properly on it -rs -- In Logic_Cafe@yahoogroups.com, Andy Brook <bbgrove@...> wrote: > > Many thanks for all the replied about mastering and I'm trying the > advice out and will let you know how I get on. Now I have an urgent > problem (again). I have a singer coming round in twelve hours, I've > been without power for two days and finally got it back but don't have > time to figure out this problem. > > After reading a few reviews I bought the FastTrack Pro audio > interface. Then I couldn't install the driver from the CD (then found > others had this problem on mac) so I downloaded and installed the > driver from M Audio's site to my mac hd. Then I went to preferences in > the mac settings and chose the Fastrack pro which was listed as an > option, so I am guessing that the driver downloaded ok. I chose > headphones for the output. In Logic 8 I chose the Fast Track Pro as > the audio device and saved the change. Now I have no sound output at > all. I can see the sound running through the mixer, but its not > outputting to my headphones, nor to the audio interface. > > I tried choosing the audio interface as my output device in mac > settings but it says there is no output control for the device. It > also says there is no input control either although the meter shows it > is hearing the input from the mic. > > I can hear itunes through my headphones ok, its just in Logic where > there is now no output. > > Could anyone suggest what blindingly obvious thing I have missed? > > As always, thanks in advance for the invaluable advice. One of these > days I will be able to answer a question myself and then I will be > very proud! > > thanks > > Andy B >
Message
Re: No output sound with Fast Track Pro
2009-08-14 by Rob Stauffer
Attachments
- No local attachments were found for this message.