Apple Logic Pro /LogicExpress Discussion group photo

Yahoo Groups archive

Apple Logic Pro /LogicExpress Discussion

Index last updated: 2026-04-28 23:06 UTC

Thread

"error while trying to synchronize audio and midi" What does this mean??

"error while trying to synchronize audio and midi" What does this mean??

2007-10-15 by fresincy

"error while trying to synchronize audio and midi, sample rate of 40485 recognized check 
conflict between logic pro and external device"

This is the error message i get in my current session. How can I fix it? Ive tried using 2 
different interfaces but it makes no difference.

Re: [Logic_Cafe] "error while trying to synchronize audio and midi" What does this mean??

2007-10-15 by GAmoore@aol.com

It usually means too much is going on - and your processor is overloaded, or 
you doing something else on the computer at the same time. Its a misleading 
error message.


> 
> "error while trying to synchronize audio and midi, sample rate of 40485 
> recognized check
> conflict between logic pro and external device"
> 
> This is the error message i get in my current session. How can I fix it? Ive 
> tried using 2
> different interfaces but it makes no difference.
> 
> 
> 




**************************************
 See what's new at http://www.aol.com


[Non-text portions of this message have been removed]

Re: "error while trying to synchronize audio and midi" What does this mean??

2007-10-18 by Joe

I believe it is because your interface is running at a different 
settting than Logic itself. I had this error years ago when running a 
SoundBlaster soundcard - a decent soundcard solved the problem 
entirely. Check that the song you are trying to open is recorded at 
the same quality as the soundcard/interface is running - i.e. both 
are at 16bit, 44.1kHz or whatever. Failing this maybe it is a problem 
with both the interfaces your tried - are they good ones?

--- In Logic_Cafe@yahoogroups.com, GAmoore@... wrote:
>
> It usually means too much is going on - and your processor is 
overloaded, or 
> you doing something else on the computer at the same time. Its a 
misleading 
> error message.
> 
> 
> > 
> > "error while trying to synchronize audio and midi, sample rate of 
40485 
> > recognized check
> > conflict between logic pro and external device"
> > 
> > This is the error message i get in my current session. How can I 
fix it? Ive 
Show quoted textHide quoted text
> > tried using 2
> > different interfaces but it makes no difference.
> > 
> > 
> > 
> 
> 
> 
> 
> **************************************
>  See what's new at http://www.aol.com
> 
> 
> [Non-text portions of this message have been removed]
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.