Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

sequence of events with MIS chips

2007-10-31 by frankjay02

I printed five test prints which included three photos, the 100 step 
graduated black and white sheet on a lustre and a matte paper. 
I ate dinner. I came back, took out the three cars, inserted the MIS 
carts, and the printer stopped printing.  The night before I printed 
about ten color and black and white photos...all fine. 

I checked USB,switche out USB,  tried nozzle test, didn't work. Re 
inserted OEM carts, nothing, went to control panel , nothing started 
printing. went to trouble shoot on epson...direct me to call tech 
support. Shut printer down a few times. Took out ALL OEM's put them 
back. No printing...put back in MIS, no printing...took out MIS, not 
printing. Tried to print from Ps..nothing....in the middle of all 
this the Ink light finally went off.

Logic would have it the MIS carts did something because
1. the printer printed about 20 prints in two nights
2. printing stopped as soon as MIS carts went in and never restarted.
thanks again 
Frank in NJ



--- In QuadtoneRIP@yahoogroups.com, "Paul Roark" <paul.roark@...> 
wrote:
>
> Chips on MIS carts that don't work are not that uncommon.  I 
recommend
> keeping some extras or just taking the chip off the Epson cart and 
using it
> on the MIS cart.  (I use a 1/8 inch wide piece of tape across the 
top to be
> sure the chip does not fall off.)  Assuming an MIS chip was bad, 
the OEM
> carts should have functioned fine when they are put back in (with 
their OEM
> chips on them).  The worst case scenario is if no chip was on a 
cart.  That
> can kill a printer by bending the wire contacts in the printer 
when the cart
> is removed.  
> 
>  
> 
> I've never heard of a bad chip causing damage to a printer.  See 
if there is
> something down in the printer that is causing the OEM chip to also 
not make
> contact with the printer contact wires.  You might also try 
cleaning the OEM
> chip contacts with a clean, soft cloth.  
> 
>  
> 
> Is it possible the OEM carts are empty?  
> 
>  
> 
> Do you have a chip re-setter?  They work on OEM chips also.  If 
you do, you
> could use those OEM chips, re-set, on the MIS carts and see what 
happens.
> 
>  
> 
> These systems can be very frustrating when they don't work - no 
question.
> 
>  
> 
> Paul
> 
> www.PaulRoark.com <http://www.paulroark.com/>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: QuadtoneRIP@yahoogroups.com 
[mailto:QuadtoneRIP@yahoogroups.com] On
> Behalf Of frankjay02
> Sent: Tuesday, October 30, 2007 5:14 PM
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] Re: QTR/Printer doesn't print after install 
MIS 3K
> inks
> 
>  
> 
> Yes Frank, all the carts snapped in correctly. I did it three 
times 
> to make sure. I also took out the MIS carts, put back in the Epson 
> OEM carts and now, NOTHING prints. Not a great first experience 
with 
> MIS carts btw. This printer is new. I ran 20 printes thru it in 
two 
> days and no problem..until the MIS inks went in. 
> thanks
> Frank
> 
> --- In QuadtoneRIP@ <mailto:QuadtoneRIP%40yahoogroups.com> 
yahoogroups.com,
> "Frank Winkler" <bodyworks@> 
> wrote:
> >
> > @Frank in NJ
> > 
> > That sounds like the chips on the cartridges don't function.
> > Are you sure, that all cartridges snapped in correctly?
> > 
> > Regards
> > Frank from Germany
> > 
> > 
> > 
> > 
> > --- In QuadtoneRIP@ <mailto:QuadtoneRIP%40yahoogroups.com>
> yahoogroups.com, Frank Jay <frankjay02@> wrote:
> > >
> > > hello all,
> > > I hope I get an answer to this and I am sorry but I have to 
> cross
> > post becuase I need the answer quickly. 
> > > 
> > > I ran some test prints with the R1800 with OEM inks thru the 
> QTR.
> > All printed well. I changed out the OEM inks with the MIS K3 
inks 
> in
> > the proper positions. The printer light went on and stayed on and
> > nothing printed. I shut down, re-started. Same thing...red 
printer
> > light on and no printing going on . The inks clicked into place 
and
> > they are on the correct positions. OS is windows xp. 
> > > 
> > > I thank in advance any help
> > > Frank in NJ
> > > 
> > > 
> > > 
> > > "The luckiest dogs are those with clipped tails....they're the 
> ones
> > who won't be chasing their own arses."
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam? Yahoo! Mail has the best spam protection around 
> > > http://mail. <http://mail.yahoo.com> yahoo.com 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
> 
>  
> 
> 
> 
> [Non-text portions of this message have been removed]
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.