QTR-Quadtone RIP

Frank,

If you are not doing color work with your 1800 you are free to put  
inks in any slots you want to use.  If you want to use Paul's  
profiles as is then yes you must use the MK, PK, and GL positions for  
Eboni.  My setup consists of Eboni MK in the MK, PK, and Y ink  
positions with MIS RCNTL_PK in the C, R, and B slots and Glop in the  
GL position.  This lets me do either matte or RC papers with or  
without glop for the latter.  All of the profiles I have put in the  
archive are for this ink configuration.  If you want to use different  
ink positions just edit the profiles to change the ink assignments.   
The MIS RCNTL-PK is a neutral photo black ink.  They also have a warm  
and cool PK.

Carl Schofield
http://photos.schophoto.com




On Jan 3, 2008, at 11:13 AM, Frank Jay wrote:

> I am a bit, well a LOT confused with Carl's post here. When I  
> bought the Eboni MIS inks for my R1800 from inksupply.com, I was  
> told they were to be put in the MK,PK and GL slots. When I bought a  
> 4.0z refill of Eboni ink I was told the  ink was to be put in all  
> three carts as the ink in each one was the same  . Why then, and  
> how, can the ink be used in the C, R and B slots.
>
>   Also..what is MIS RCNTL PK ink? I was told that there was only  
> one ink to use in the R1800...the 3MK ink and only to be used on  
> matter papers.
>
>   I will hold off other quetions about this for another post, I  
> think my confusion is showing itself as it is.
>   thanks
>   Frank
>
> Carl Schofield <list@...> wrote:
>           I put a profile for Ilford Gold Silk in the R1800 files  
> folder
> archive. The profile is for MIS RCNTL PK ink in the C, R, and B
> positions with GLOP in the GL channel. The paper is designed for
> photo black ink. Unless you spray your prints, I would think that
> Eboni might rub off quite easily.
>
> Carl
>
> On Jan 3, 2008, at 2:32 AM, scott_now_coming wrote:
>
>> If anyone's printing with 3-MK with an R1800 (or R800, as in my case)
>> and has any of the Gold Fibre Silk, they should run a few test.
>>
>> Before turning off my computer and printers for the evening, I  
>> thought
>> I'd try running a 4x5" piece of GFS through my R800 loaded with Eboni
>> 3-MK.
>> I was pleasantly suprised by the result.
>>
>> My QTR settings were:
>>
>> Type: Matte
>> Curve 1: 3-MKEpsPremArtScapbook
>>
>> If I had the means to measure step wedges, I'd make a profile.
>> Unfortunatly, I only have an i-1 to calibrate monitors. :>(
>>
>> Anyhow, I think the 3-MK w/IGGFS may make a great combo.
>>
>> Scott
>>
>


[Non-text portions of this message have been removed]