Yahoo Groups archive
Thread
2011-02-28 by janet
I've bought it - have accessed the "download" pg. I don't see the "Install-QTR-#.#.#. package to click on. I've printed the 19 pg tutorial but can't get past the 1st pg. if I can't figure out the download procedure. I'm using a Mac Snow Leopard so that piece is good to go....Now how do I get it to load?
2011-02-28 by Doug Taylor
Go to Applications, QuadtoneRIP, Profiles, open the folder for your printer model number, click on Install(your printer number).command Go to System Preferences, Print & Fax, you should see a new installed printer called Quad(your printer number). Choose this printer in the print dialogue. On Feb 28, 2011, at 4:36 PM, janet wrote: > I've bought it - have accessed the "download" pg. I don't see the > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg > tutorial but can't get past the 1st pg. if I can't figure out the > download procedure. I'm using a Mac Snow Leopard so that piece is > good to go....Now how do I get it to load? > > > [Non-text portions of this message have been removed]
2011-03-01 by Janet Reider
Thanks Doug, I finally figured it out,, tried to print some B&W images and they were terrible: dark, tiny vertical stripes, etc. I'm wondering what I can do to get the print I'm expecting after having bought this product... Any thoughts? On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...> wrote: > Go to Applications, QuadtoneRIP, Profiles, open the folder for your > printer model number, click on Install(your printer number).command > > Go to System Preferences, Print & Fax, you should see a new installed > printer called Quad(your printer number). Choose this printer in the > print dialogue. > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > I've bought it - have accessed the "download" pg. I don't see the > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg > > tutorial but can't get past the 1st pg. if I can't figure out the > > download procedure. I'm using a Mac Snow Leopard so that piece is > > good to go....Now how do I get it to load? > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > -- Janet Sampson Reider JSR Photography www.janetreider.com [Non-text portions of this message have been removed]
2011-03-01 by Doug Taylor
Janet, sounds like the vertical stripes could be banding. Try a head cleaning and then a nozzle check to see that all nozzles are working properly and not clogged. On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > Thanks Doug, I finally figured it out,, tried to print some B&W > images and > they were terrible: dark, tiny vertical stripes, etc. I'm wondering > what > I can do to get the print I'm expecting after having bought this > product... > Any thoughts? > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...> > wrote: > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your > > printer model number, click on Install(your printer number).command > > > > Go to System Preferences, Print & Fax, you should see a new > installed > > printer called Quad(your printer number). Choose this printer in the > > print dialogue. > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > I've bought it - have accessed the "download" pg. I don't see the > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg > > > tutorial but can't get past the 1st pg. if I can't figure out the > > > download procedure. I'm using a Mac Snow Leopard so that piece is > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > -- > Janet Sampson Reider > JSR Photography > www.janetreider.com > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]
2011-03-01 by Janet Reider
Thanks Doug, I'll check it - nozzle etc. However, it also could be that I've set it up wrong by putting in an incorrect printer profile - " K7" and it should be UC. SO, how do I remedy that? Also, that was the only folder I installed...the printer profile - and I'm thinking there is something important I'm missing here as there are many more pages in the Tutorial! The Tutorial stops at Leopard and my system is Snow Leopard - is that important. Perhaps my next step (after checking nozzles and head cleaning) might be to go to the "DiagnosticScript.command site and send you that info....yes? On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> wrote: > Janet, sounds like the vertical stripes could be banding. Try a head > cleaning and then a nozzle check to see that all nozzles are working > properly and not clogged. > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > images and > > they were terrible: dark, tiny vertical stripes, etc. I'm wondering > > what > > I can do to get the print I'm expecting after having bought this > > product... > > Any thoughts? > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...> > > wrote: > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your > > > printer model number, click on Install(your printer number).command > > > > > > Go to System Preferences, Print & Fax, you should see a new > > installed > > > printer called Quad(your printer number). Choose this printer in the > > > print dialogue. > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > I've bought it - have accessed the "download" pg. I don't see the > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg > > > > tutorial but can't get past the 1st pg. if I can't figure out the > > > > download procedure. I'm using a Mac Snow Leopard so that piece is > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > -- > > Janet Sampson Reider > > JSR Photography > > www.janetreider.com > > > > [Non-text portions of this message have been removed] > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > -- Janet Sampson Reider JSR Photography www.janetreider.com [Non-text portions of this message have been removed]
2011-03-01 by Doug Taylor
When in QTR printer settings, you need to choose the Curve that matches your Ink Set, such as UC; choose the media that matches what paper you are printing on, and then choose the correct Black Ink, either Matte or Photo. If you do this, think you'll get a nice print On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > Thanks Doug, I'll check it - nozzle etc. However, it also could be > that > I've set it up wrong by putting in an incorrect printer profile - " > K7" and > it should be UC. SO, how do I remedy that? > Also, that was the only folder I installed...the printer profile - > and I'm > thinking there is something important I'm missing here as there are > many > more pages in the Tutorial! The Tutorial stops at Leopard and my > system > is Snow Leopard - is that important. > Perhaps my next step (after checking nozzles and head cleaning) > might be to > go to the "DiagnosticScript.command site and send you that > info....yes? > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> > wrote: > > > Janet, sounds like the vertical stripes could be banding. Try a head > > cleaning and then a nozzle check to see that all nozzles are working > > properly and not clogged. > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > images and > > > they were terrible: dark, tiny vertical stripes, etc. I'm > wondering > > > what > > > I can do to get the print I'm expecting after having bought this > > > product... > > > Any thoughts? > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > <dougtaylor13@mac.com> > > > wrote: > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > your > > > > printer model number, click on Install(your printer > number).command > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > installed > > > > printer called Quad(your printer number). Choose this printer > in the > > > > print dialogue. > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > see the > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > pg > > > > > tutorial but can't get past the 1st pg. if I can't figure > out the > > > > > download procedure. I'm using a Mac Snow Leopard so that > piece is > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > -- > > > Janet Sampson Reider > > > JSR Photography > > > www.janetreider.com > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > -- > Janet Sampson Reider > JSR Photography > www.janetreider.com > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]
2011-03-01 by Janet Reider
Hello Doug,
I performed a nozzle check as well as a cleaning and the print-out is
perfect.
I was able to replace the incorrect printer profile with the correct one and
made a test print. That print has tiny vertical stripes and is also
dark...not as dark as the 1st test yesterday but not acceptable. SO - here
is the copy/paste from DiagnosticScript. You'll see a "looking for
printer..." that's because I started the printing not knowing my printer
was off....
Let me know what I can do as I"m anxious to begin printing some B&W images
- that do not have green or purple casts..
Thanks,
Janet Reider
janet@...
Last login: Tue Mar 1 14:40:37 on ttys000
/Applications/QuadToneRIP/DiagnosticScript.command ; exit;
Mac:~ janetreider$ /Applications/QuadToneRIP/DiagnosticScript.command ;
exit;
********************************************************************
**** QuadToneRIP 2.7.1 Diagnostic Script --- Save Output for Analysis ****
********************************************************************
Tue Mar 1 15:16:21 EST 2011
**** System Info ****
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010;
root:xnu-1504.9.26~3/RELEASE_I386
**** Printer Info ****
scheduler is running
system default destination: EPSON_Stylus_Photo_2200_wifi
device for BLACK_PRINTER___Suzanne_Reiderb_9s_Computer:
dnssd://BLACK%20PRINTER%20%40%20Suzanne%20Reider%E2%80%99s%20Computer._ipp._tcp.local.
device for EPSON_Perfection_3200: usb://00000000-0000-0000-0000-000004B8011C
device for EPSON_Stylus_Photo_2200:
usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450
device for EPSON_Stylus_Photo_2200_wifi:
dnssd://EPSON%20Stylus%20Photo%202200._riousbprint._tcp.local.
device for HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer:
dnssd://HP%20Photosmart%20C3100%20series%20%40%20Suzanne%20Reider%E2%80%99s%20Computer._ipp._tcp.local.
device for HP_Photosmart_C4700_series:
usb://HP/Photosmart%20C4700%20series?serial=CN97RHZ0F205CN
device for Quad2200:
usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450
BLACK_PRINTER___Suzanne_Reiderb_9s_Computer accepting requests since Wed
Dec 1 15:30:42 2010
EPSON_Perfection_3200 accepting requests since Mon Oct 18 10:23:04 2010
EPSON_Stylus_Photo_2200 accepting requests since Mon Feb 28 17:00:57 2011
EPSON_Stylus_Photo_2200_wifi accepting requests since Mon Feb 28 17:39:02
2011
HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer accepting requests
since Tue Mar 1 14:19:43 2011
HP_Photosmart_C4700_series accepting requests since Fri Nov 26 00:16:26 2010
Quad2200 accepting requests since Tue Mar 1 14:52:13 2011
printer BLACK_PRINTER___Suzanne_Reiderb_9s_Computer is idle. enabled since
Wed Dec 1 15:30:42 2010
printer EPSON_Perfection_3200 is idle. enabled since Mon Oct 18 10:23:04
2010
printer EPSON_Stylus_Photo_2200 is idle. enabled since Mon Feb 28 17:00:57
2011
printer EPSON_Stylus_Photo_2200_wifi is idle. enabled since Mon Feb 28
17:39:02 2011
Looking for printer...
printer HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer now
printing HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer-97.
enabled since Tue Mar 1 14:19:43 2011
Looking for printer...
printer HP_Photosmart_C4700_series is idle. enabled since Fri Nov 26
00:16:26 2010
printer Quad2200 is idle. enabled since Tue Mar 1 14:52:13 2011
Ready to print.
HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer-97 janetreider
48128 Sun Nov 14 19:53:18 2010
**** QTR Programs ****
/Library/Printers/QTR/bin
Quad.pm* qcurve* qgamma* qmerge* quadcurves*
qacv* qdensity* qgraph* qpart* quadprofile*
qacvraw* qdiff* qlimit* qplot*
qadd* qdotgain* qline* qspline*
/Library/Printers/QTR/filter
-rwxr-xr-x 1 root admin 2586 Feb 2 2010 quadtoneprint
-rwxr-xr-x 1 root admin 1570336 Dec 2 12:49 quadtoprinter
**** Plugin Programs ****
total 0
drwxr-xr-x 3 janetreider janetreider 102 Mar 26 2010 QuadTonePDE.plugin
**** QTR Printer Descriptions ****
/Library/Printers/QTR/ppd
Quad10000.ppd.gz Quad4880.ppd.gz QuadEX.ppd.gz
Quad1160.ppd.gz Quad7000.ppd.gz QuadR1800.ppd.gz
Quad1200.ppd.gz Quad7500.ppd.gz QuadR1900.ppd.gz
Quad1270.ppd.gz Quad7600.ppd.gz QuadR200.ppd.gz
Quad1280.ppd.gz Quad7800.ppd.gz QuadR220.ppd.gz
Quad1290.ppd.gz Quad7880.ppd.gz QuadR2400.ppd.gz
Quad1400.ppd.gz Quad860.ppd.gz QuadR260.ppd.gz
Quad2000.ppd.gz Quad870.ppd.gz QuadR280.ppd.gz
Quad2100.ppd.gz Quad890.ppd.gz QuadR2880.ppd.gz
Quad2200.ppd.gz Quad9000.ppd.gz QuadR300.ppd.gz
Quad3000.ppd.gz Quad9500.ppd.gz QuadR320.ppd.gz
Quad3800.ppd.gz Quad9600.ppd.gz QuadR340.ppd.gz
Quad3880.ppd.gz Quad980.ppd.gz QuadR380.ppd.gz
Quad4000.ppd.gz Quad9800.ppd.gz QuadR800.ppd.gz
Quad4800.ppd.gz Quad9880.ppd.gz
**** QTR Printer Profiles ****
Quad1160-UT Quad2200-GQ Quad7000-K6 Quad9800 QuadR260-MIS
Quad1200 Quad2200-K7 Quad7500-K6 Quad9800-K7 QuadR280
Quad1270-UT2 Quad2200-UT Quad7600 Quad9880 QuadR280-MIS
Quad1280-K6 Quad2200-UT7 Quad7600-K7 Quad9880-K7 QuadR2880
Quad1280-UT2 Quad3000 Quad7800 QuadEX QuadR2880-K7
Quad1290-K6 Quad3800 Quad7800-K7 QuadR1800 QuadR300-GQ
Quad1290-UT2 Quad3800-K7 Quad7880 QuadR1800-3MK QuadR300-K6
Quad1400 Quad3880 Quad7880-K7 QuadR1800-K7 QuadR320-GQ
Quad1400-K6 Quad3880-K7 Quad860-UT QuadR1900 QuadR320-K6
Quad1400-MIS Quad4000 Quad870-UT2 QuadR1900-K7 QuadR340-GQ
Quad2000 Quad4000-GQ Quad890-K6 QuadR200-GQ QuadR340-K6
Quad2100 Quad4000-K7 Quad890-UT2 QuadR200-K6 QuadR380
Quad2100-GQ Quad4800 Quad9000-K6 QuadR220-GQ QuadR380-MIS
Quad2100-K7 Quad4800-K7 Quad9500-K6 QuadR220-K6 QuadR800
Quad2100-UT Quad4880 Quad9600 QuadR2400 QuadR800-3MK
Quad2100-UT7 Quad4880-K7 Quad9600-K7 QuadR2400-K7 QuadR800-K7
Quad2200 Quad7000-GQ Quad980 QuadR260
**** USB connections ****
-r-xr-xr-x 1 root wheel 91792 Jan 4 01:22 /usr/libexec/cups/backend/usb
DEBUG:
load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.plugin)
(kr:0x00000000)
DEBUG:
load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin)
(kr:0x00000000)
direct usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450 "EPSON
Stylus Photo 2200" "EPSON Stylus Photo 2200"
"SERN:L53010302171504450;MFG:EPSON;CMD:ESCPL2,BDC,D4;MDL:Stylus Photo
2200;CLS:PRINTER;DES:EPSON Stylus Photo 2200;" ""
**** CUPS Info ****
D [28/Feb/2011:17:38:55 -0500] [Job 185] cgpdftoraster - languageLevel = 3,
mediaBox.size.width = 288, mediaBox.size.height = 432
D [28/Feb/2011:17:38:55 -0500] [Job 185] band width = 2700, bytesPerRow =
10800, band height = 970, height = 4140
D [28/Feb/2011:17:38:55 -0500] [Job 185] context width = 2700, height = 970,
bitsPerComponent = 8, bitsPerPixel = 32, bytesPerRow = 10800, bitmapInfo =
5, resolution = (720.000000, 720.000000)
D [28/Feb/2011:17:38:55 -0500] [Job 185] NOT using display list
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] STATE: +offline-report
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
D [28/Feb/2011:17:38:55 -0500] [Job 185] Job canceled by "janetreider"
D [28/Feb/2011:17:38:55 -0500] [Job 185] End of messages
D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state=3(idle)
D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state-message="Looking for
printer..."
D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state-reasons=none
E [28/Feb/2011:17:44:43 -0500] [cups-deviced] Bad line from "HP-Fax": on
write, error=-1
E [28/Feb/2011:17:49:19 -0500] [Job 191] Stopping unresponsive job!
E [01/Mar/2011:14:25:42 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:25:42 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:36:14 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:36:14 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:40:09 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:40:09 -0500] Unable to register ICC color profiles for
"Quad2200-K7" - -4229
E [01/Mar/2011:14:40:38 -0500] Unable to register ICC color profiles for
"Quad2200" - -4229
E [01/Mar/2011:14:40:38 -0500] Unable to register ICC color profiles for
"Quad2200" - -4229
********************************************************************
**** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****
********************************************************************
logout
[Process completed]
On Tue, Mar 1, 2011 at 7:37 AM, Doug Taylor <dougtaylor13@...> wrote:
> Janet, sounds like the vertical stripes could be banding. Try a head
> cleaning and then a nozzle check to see that all nozzles are working
> properly and not clogged.
>
> On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
>
> > Thanks Doug, I finally figured it out,, tried to print some B&W
> > images and
> > they were terrible: dark, tiny vertical stripes, etc. I'm wondering
> > what
> > I can do to get the print I'm expecting after having bought this
> > product...
> > Any thoughts?
> >
> > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...>
> > wrote:
> >
> > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your
> > > printer model number, click on Install(your printer number).command
> > >
> > > Go to System Preferences, Print & Fax, you should see a new
> > installed
> > > printer called Quad(your printer number). Choose this printer in the
> > > print dialogue.
> > >
> > > On Feb 28, 2011, at 4:36 PM, janet wrote:
> > >
> > > > I've bought it - have accessed the "download" pg. I don't see the
> > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg
> > > > tutorial but can't get past the 1st pg. if I can't figure out the
> > > > download procedure. I'm using a Mac Snow Leopard so that piece is
> > > > good to go....Now how do I get it to load?
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> > --
> > Janet Sampson Reider
> > JSR Photography
> > www.janetreider.com
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
--
Janet Sampson Reider
JSR Photography
www.janetreider.com
[Non-text portions of this message have been removed]2011-03-01 by Janet Reider
Should i have installed any more than the printer profile? Curves, for example? Well you'll see what I've got when you look at the Diagnostic Script - On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote: > When in QTR printer settings, you need to choose the Curve that > matches your Ink Set, such as UC; choose the media that matches what > paper you are printing on, and then choose the correct Black Ink, > either Matte or Photo. If you do this, think you'll get a nice print > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be > > that > > I've set it up wrong by putting in an incorrect printer profile - " > > K7" and > > it should be UC. SO, how do I remedy that? > > Also, that was the only folder I installed...the printer profile - > > and I'm > > thinking there is something important I'm missing here as there are > > many > > more pages in the Tutorial! The Tutorial stops at Leopard and my > > system > > is Snow Leopard - is that important. > > Perhaps my next step (after checking nozzles and head cleaning) > > might be to > > go to the "DiagnosticScript.command site and send you that > > info....yes? > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> > > wrote: > > > > > Janet, sounds like the vertical stripes could be banding. Try a head > > > cleaning and then a nozzle check to see that all nozzles are working > > > properly and not clogged. > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > > images and > > > > they were terrible: dark, tiny vertical stripes, etc. I'm > > wondering > > > > what > > > > I can do to get the print I'm expecting after having bought this > > > > product... > > > > Any thoughts? > > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > > <dougtaylor13@...> > > > > wrote: > > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > > your > > > > > printer model number, click on Install(your printer > > number).command > > > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > > installed > > > > > printer called Quad(your printer number). Choose this printer > > in the > > > > > print dialogue. > > > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > > see the > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > > pg > > > > > > tutorial but can't get past the 1st pg. if I can't figure > > out the > > > > > > download procedure. I'm using a Mac Snow Leopard so that > > piece is > > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Janet Sampson Reider > > > > JSR Photography > > > > www.janetreider.com > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > -- > > Janet Sampson Reider > > JSR Photography > > www.janetreider.com > > > > [Non-text portions of this message have been removed] > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > -- Janet Sampson Reider JSR Photography www.janetreider.com [Non-text portions of this message have been removed]
2011-03-03 by Janet Reider
Can you look at the "DaignosticScript.command that i have copied and pasted and try to help me rectify this situation. The prints are no longer striped but extraordinarily dark w/o any gradations...DARK! Please get back to me - or, refund by $50.00 Thank you. Janet Reider On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote: > When in QTR printer settings, you need to choose the Curve that > matches your Ink Set, such as UC; choose the media that matches what > paper you are printing on, and then choose the correct Black Ink, > either Matte or Photo. If you do this, think you'll get a nice print > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be > > that > > I've set it up wrong by putting in an incorrect printer profile - " > > K7" and > > it should be UC. SO, how do I remedy that? > > Also, that was the only folder I installed...the printer profile - > > and I'm > > thinking there is something important I'm missing here as there are > > many > > more pages in the Tutorial! The Tutorial stops at Leopard and my > > system > > is Snow Leopard - is that important. > > Perhaps my next step (after checking nozzles and head cleaning) > > might be to > > go to the "DiagnosticScript.command site and send you that > > info....yes? > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> > > wrote: > > > > > Janet, sounds like the vertical stripes could be banding. Try a head > > > cleaning and then a nozzle check to see that all nozzles are working > > > properly and not clogged. > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > > images and > > > > they were terrible: dark, tiny vertical stripes, etc. I'm > > wondering > > > > what > > > > I can do to get the print I'm expecting after having bought this > > > > product... > > > > Any thoughts? > > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > > <dougtaylor13@...> > > > > wrote: > > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > > your > > > > > printer model number, click on Install(your printer > > number).command > > > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > > installed > > > > > printer called Quad(your printer number). Choose this printer > > in the > > > > > print dialogue. > > > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > > see the > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > > pg > > > > > > tutorial but can't get past the 1st pg. if I can't figure > > out the > > > > > > download procedure. I'm using a Mac Snow Leopard so that > > piece is > > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Janet Sampson Reider > > > > JSR Photography > > > > www.janetreider.com > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > -- > > Janet Sampson Reider > > JSR Photography > > www.janetreider.com > > > > [Non-text portions of this message have been removed] > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > -- Janet Sampson Reider JSR Photography www.janetreider.com [Non-text portions of this message have been removed]
2011-03-04 by shileshjani
Janet, I have read these threads, and I have not been able to find which printer and inks you are using. With QTR it is essentail you match the curves/profiles you use with the correct printer and ink set. I am not familiar with the vegaries of the various Mac OS systems. So I cannot help you there. But let us start with the basics. What printer, which inks? Hope things start working out for you. Shilesh --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote:
> > Can you look at the "DaignosticScript.command that i have copied and pasted > and try to help me rectify this situation. The prints are no longer striped > but extraordinarily dark w/o any gradations...DARK! > Please get back to me - or, refund by $50.00 > Thank you. > Janet Reider > > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote: > > > When in QTR printer settings, you need to choose the Curve that > > matches your Ink Set, such as UC; choose the media that matches what > > paper you are printing on, and then choose the correct Black Ink, > > either Matte or Photo. If you do this, think you'll get a nice print > > > > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > > > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be > > > that > > > I've set it up wrong by putting in an incorrect printer profile - " > > > K7" and > > > it should be UC. SO, how do I remedy that? > > > Also, that was the only folder I installed...the printer profile - > > > and I'm > > > thinking there is something important I'm missing here as there are > > > many > > > more pages in the Tutorial! The Tutorial stops at Leopard and my > > > system > > > is Snow Leopard - is that important. > > > Perhaps my next step (after checking nozzles and head cleaning) > > > might be to > > > go to the "DiagnosticScript.command site and send you that > > > info....yes? > > > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> > > > wrote: > > > > > > > Janet, sounds like the vertical stripes could be banding. Try a head > > > > cleaning and then a nozzle check to see that all nozzles are working > > > > properly and not clogged. > > > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > > > images and > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm > > > wondering > > > > > what > > > > > I can do to get the print I'm expecting after having bought this > > > > > product... > > > > > Any thoughts? > > > > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > > > <dougtaylor13@...> > > > > > wrote: > > > > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > > > your > > > > > > printer model number, click on Install(your printer > > > number).command > > > > > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > > > installed > > > > > > printer called Quad(your printer number). Choose this printer > > > in the > > > > > > print dialogue. > > > > > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > > > see the > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > > > pg > > > > > > > tutorial but can't get past the 1st pg. if I can't figure > > > out the > > > > > > > download procedure. I'm using a Mac Snow Leopard so that > > > piece is > > > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Janet Sampson Reider > > > > > JSR Photography > > > > > www.janetreider.com > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > -- > > > Janet Sampson Reider > > > JSR Photography > > > www.janetreider.com > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > > -- > Janet Sampson Reider > JSR Photography > www.janetreider.com > > > [Non-text portions of this message have been removed] >
2011-03-04 by Janet Reider
Hi - Thanks for your offer of help. My printer is an Epson 2200 - so those are the "printer profile" ink sets that I checked in my download. On the print page I do not have sliders to chose percentages of this or that ink. In fact, it seems as if the print page that comes up when I ask the printer to "print" is not the one I should be seeing but I don't know how to access any other The print page that comes up is the one that is the standard for my printer. I'm also working with Photoshop CS5 (not one of the ones in the tutorial). For the time being I have returned to my CS5 B&W settings to try to get decent B&W prints as I'm simply not succeeding in my effort to use QuadTone. Any suggestions are welcomed. Janet On Fri, Mar 4, 2011 at 12:05 AM, shileshjani <shileshjani@...> wrote: > > > Janet, > > I have read these threads, and I have not been able to find which printer > and inks you are using. With QTR it is essentail you match the > curves/profiles you use with the correct printer and ink set. I am not > familiar with the vegaries of the various Mac OS systems. So I cannot help > you there. But let us start with the basics. What printer, which inks? > > Hope things start working out for you. > > Shilesh > > --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote: > > > > Can you look at the "DaignosticScript.command that i have copied and > pasted > > and try to help me rectify this situation. The prints are no longer > striped > > but extraordinarily dark w/o any gradations...DARK! > > Please get back to me - or, refund by $50.00 > > Thank you. > > Janet Reider > > > > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote: > > > > > When in QTR printer settings, you need to choose the Curve that > > > matches your Ink Set, such as UC; choose the media that matches what > > > paper you are printing on, and then choose the correct Black Ink, > > > either Matte or Photo. If you do this, think you'll get a nice print > > > > > > > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > > > > > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be > > > > that > > > > I've set it up wrong by putting in an incorrect printer profile - " > > > > K7" and > > > > it should be UC. SO, how do I remedy that? > > > > Also, that was the only folder I installed...the printer profile - > > > > and I'm > > > > thinking there is something important I'm missing here as there are > > > > many > > > > more pages in the Tutorial! The Tutorial stops at Leopard and my > > > > system > > > > is Snow Leopard - is that important. > > > > Perhaps my next step (after checking nozzles and head cleaning) > > > > might be to > > > > go to the "DiagnosticScript.command site and send you that > > > > info....yes? > > > > > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> > > > > wrote: > > > > > > > > > Janet, sounds like the vertical stripes could be banding. Try a > head > > > > > cleaning and then a nozzle check to see that all nozzles are > working > > > > > properly and not clogged. > > > > > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > > > > images and > > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm > > > > wondering > > > > > > what > > > > > > I can do to get the print I'm expecting after having bought this > > > > > > product... > > > > > > Any thoughts? > > > > > > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > > > > <dougtaylor13@...> > > > > > > wrote: > > > > > > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > > > > your > > > > > > > printer model number, click on Install(your printer > > > > number).command > > > > > > > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > > > > installed > > > > > > > printer called Quad(your printer number). Choose this printer > > > > in the > > > > > > > print dialogue. > > > > > > > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > > > > see the > > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > > > > pg > > > > > > > > tutorial but can't get past the 1st pg. if I can't figure > > > > out the > > > > > > > > download procedure. I'm using a Mac Snow Leopard so that > > > > piece is > > > > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Janet Sampson Reider > > > > > > JSR Photography > > > > > > www.janetreider.com > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Janet Sampson Reider > > > > JSR Photography > > > > www.janetreider.com > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > -- > > Janet Sampson Reider > > JSR Photography > > www.janetreider.com > > > > > > [Non-text portions of this message have been removed] > > > > > -- Janet Sampson Reider JSR Photography www.janetreider.com [Non-text portions of this message have been removed]
2011-03-04 by shileshjani
Janet, Did you exactly follow install instructions per the tutorial linked below. It clearly states that you OS X 10.6 Snow Leopard is supported. http://www.quadtonerip.com/Tutorial.pdf On CS3 if you follow the instructions, you should clearly see Quad 2200 in the Print Dialog. Are you getting that far? Shilesh --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote:
> > Hi - Thanks for your offer of help. > > My printer is an Epson 2200 - so those are the "printer profile" ink sets > that I checked in my download. On the print page I do not have sliders to > chose percentages of this or that ink. In fact, it seems as if the print > page that comes up when I ask the printer to "print" is not the one I should > be seeing but I don't know how to access any other The print page that > comes up is the one that is the standard for my printer. > I'm also working with Photoshop CS5 (not one of the ones in the > tutorial). > For the time being I have returned to my CS5 B&W settings to try to get > decent B&W prints as I'm simply not succeeding in my effort to use QuadTone. > Any suggestions are welcomed. > Janet > > On Fri, Mar 4, 2011 at 12:05 AM, shileshjani <shileshjani@...> wrote: > > > > > > > Janet, > > > > I have read these threads, and I have not been able to find which printer > > and inks you are using. With QTR it is essentail you match the > > curves/profiles you use with the correct printer and ink set. I am not > > familiar with the vegaries of the various Mac OS systems. So I cannot help > > you there. But let us start with the basics. What printer, which inks? > > > > Hope things start working out for you. > > > > Shilesh > > > > --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@> wrote: > > > > > > Can you look at the "DaignosticScript.command that i have copied and > > pasted > > > and try to help me rectify this situation. The prints are no longer > > striped > > > but extraordinarily dark w/o any gradations...DARK! > > > Please get back to me - or, refund by $50.00 > > > Thank you. > > > Janet Reider > > > > > > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@> wrote: > > > > > > > When in QTR printer settings, you need to choose the Curve that > > > > matches your Ink Set, such as UC; choose the media that matches what > > > > paper you are printing on, and then choose the correct Black Ink, > > > > either Matte or Photo. If you do this, think you'll get a nice print > > > > > > > > > > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote: > > > > > > > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be > > > > > that > > > > > I've set it up wrong by putting in an incorrect printer profile - " > > > > > K7" and > > > > > it should be UC. SO, how do I remedy that? > > > > > Also, that was the only folder I installed...the printer profile - > > > > > and I'm > > > > > thinking there is something important I'm missing here as there are > > > > > many > > > > > more pages in the Tutorial! The Tutorial stops at Leopard and my > > > > > system > > > > > is Snow Leopard - is that important. > > > > > Perhaps my next step (after checking nozzles and head cleaning) > > > > > might be to > > > > > go to the "DiagnosticScript.command site and send you that > > > > > info....yes? > > > > > > > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@> > > > > > wrote: > > > > > > > > > > > Janet, sounds like the vertical stripes could be banding. Try a > > head > > > > > > cleaning and then a nozzle check to see that all nozzles are > > working > > > > > > properly and not clogged. > > > > > > > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote: > > > > > > > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W > > > > > > > images and > > > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm > > > > > wondering > > > > > > > what > > > > > > > I can do to get the print I'm expecting after having bought this > > > > > > > product... > > > > > > > Any thoughts? > > > > > > > > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor > > > > > <dougtaylor13@> > > > > > > > wrote: > > > > > > > > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for > > > > > your > > > > > > > > printer model number, click on Install(your printer > > > > > number).command > > > > > > > > > > > > > > > > Go to System Preferences, Print & Fax, you should see a new > > > > > > > installed > > > > > > > > printer called Quad(your printer number). Choose this printer > > > > > in the > > > > > > > > print dialogue. > > > > > > > > > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote: > > > > > > > > > > > > > > > > > I've bought it - have accessed the "download" pg. I don't > > > > > see the > > > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 > > > > > pg > > > > > > > > > tutorial but can't get past the 1st pg. if I can't figure > > > > > out the > > > > > > > > > download procedure. I'm using a Mac Snow Leopard so that > > > > > piece is > > > > > > > > > good to go....Now how do I get it to load? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Janet Sampson Reider > > > > > > > JSR Photography > > > > > > > www.janetreider.com > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Janet Sampson Reider > > > > > JSR Photography > > > > > www.janetreider.com > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Janet Sampson Reider > > > JSR Photography > > > www.janetreider.com > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > -- > Janet Sampson Reider > JSR Photography > www.janetreider.com > > > [Non-text portions of this message have been removed] >
2013-12-13 by <scottevansphotography@...>
OS 10.9 Maverick give me this error when trying to install the profile for my 7880 QTR
Installing QuadToneRIP Curves Printer Quad7880-K7
Couldn't open /etc/cups/ppd/Quad7880-K7.ppd for reading: No such file or directory
HELP!!!