Akai S1000 / S1100 samplers

Thank's for the fast Answer,

i put all Card's, incl. an MuTec SCSI, out and tested all alone.
With the Original 2Meg Card in the very first Slot it Displays 1Mb free Memory, and with the 8Meg in the first only 4. And the 2Meg in the first and the 8Meg in the second Slot say's 5MWord free. :-(
I don't know if the Jumpers re-soldered, because i don't have put the Mainboard out. But the previsous Owner says, it has Work with 10Meg before. Once a Day after Turn on the Unit, it has Display the Half of the Memory.



--- In akaiS1000S1100Samplers@yahoogroups.com, PeWe <ha-pewe@...> wrote:
>
> 
> Hi !
> 
> Yep, the main prob is:
> There are NO service manuals in the web or available for free for S-1000 
> and S-1100.
> Believe me, I´m looking for years and I know people who have one but 
> don´t do copys !
> 
> The service who owns the manual wasn´t able to find a fault of my 2nd 
> S-1100 because "it´s not a standard error" ...
> Other techs cannot work on my S-1100 because they have no service manual ...
> 
> I had the impression, the pro-service wanted my machine for parts 
> because parts for S-1000/ S-1100 are very rare now or impossible to find.
> 
> In your case, I´d try to find more memory expansions 1st to swap ´em 
> inside the machine.
> Did you place the 2meg card in the very 1st slot and the 8meg card in 
> the 2nd one ? ( because that´ the order it has to be)
> Are the jumper-bridges re-soldered for use of 8meg cards in a S-1000 at 
> the bottom of you mainboard ? (S-1000 isn´t designed for usage of 8meg 
> cards)
> Are you sure the 8meg card isn´t damaged ?
> 
> marber_mba schrieb:
> >
> >
> > Hello to all,
> >
> > i'm new here, and i have a Problem with my S1000.
> > If i play the internal 4 Sound's with the Play Button, or via MIDI, 
> > only the Sinus and Sawtooth Sound works. The Square and Pulse are only 
> > produce an muffled Klick.
> > If i load Sounds, these are not working. Some are not to hear, others 
> > are distorted or undifferentiated Noises.
> > The Sampler has the 2.2 System. But i can load the 4.4 from Disk and 
> > it seem's to Work fine.
> > Equipped with an 8Mb Expansion, it displays only 5Mb. The Original 
> > 2Meg and Expansion 8Meg at half. I Think, there is an Damage at the 
> > Memory Controller, or an BUS-Driver Chip.?
> > Does Anybody know, what Damage this be, and how i can repair this?
> > I'm an Hobby Electronic Freak since 25 Years, and Specialist for 
> > Computer and Network, so i Think, i can repair this, if it no so great 
> > Problem. ;-) But i don't have an Service Manual, Schematic Diagram ore 
> > Special Tools an Measuring Instruments to find the Error.
> >
> > Thanks.
> > Regards Mario
> >
> > .
> >
> >
>